Finding A Contacts Entry - Samsung SCHU340 User Manual

Finding a Contacts Entry

Voice Method
Use the VoiceSignal Contacts command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note: The Contacts command shows the requested contact information in the display but does not dial any
phone numbers for the contact.
To look up information for a specific contact:
In standby mode, press and hold
1.
"Say a Command" appears in the display and is pronounced through the
speaker.
Say "Contacts".
2.
VoiceSignal prompts you to "Say the name."
Speak clearly and say the full name of the person you want to call, exactly
3.
as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact information for that
name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of up to three
names appears in the display, and VoiceSignal prompts you with "Did you
say?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next name, or use the
4.
keypad to select the correct name from the list. (See "Choice Lists
Settings" on page 111, for more information.)
• To say the name again, press the Repeat (right) soft (
• To exit VoiceSignal without dialing, press the Settings (left) soft (
press the Cancel (right) soft (
The contact information for the name you selected appears in the display.
5.
Keypad Methods
If you've stored a named contact in your Contacts list, Find lets you locate the entry
quickly.
In standby mode, do one of the following:
1.
• Press the Contacts (right) soft key (
• Press the MENU (
The Find screen appears in the display with By Name showing.
56
to launch VoiceSignal.
).
).
) key, then press
OK
@
) key.
(for Contacts) and
@
) key and
for Find.