Samsung SCH-U350 Series User Manual page 33

Find the desired entry in the Contacts list. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 28.)
Press the Edit soft key. The Edit Contact screen appears in
2.
the display with the contact name highlighted.
Highlight a number stored in this contact entry.
3.
To backspace and delete numbers, press
4.
To clear all numbers in the highlighted field, press and hold
5.
.
Note: You can also add numbers (such as a Fax number) to the entry, assign
it to a Group, and add other information.
When you're finished editing the entry, press
6.
changes are saved and a confirmation message appears in
the display.
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
P pause — A hard pause stops the calling sequence until further input
•
from you.
T pause — A four-second pause stops the calling sequence for four
•
seconds and then automatically sends the remaining digits.
Tip: You can enter multiple four-second pauses to extend the length of a
pause. For example, two consecutive four-second pauses cause a total
pause time of eight seconds.
.
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
Store Pauses in a New Contacts Entry
In standby mode, enter the number you wish to store (such
1.
as your bank's teleservice number).
. Your
Press the Options soft key. The following pause options are
2.
available:
• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a four-second pause.
Select the pause option of your choice to enter it into your
3.
number sequence.
Understanding Your Contacts 30