Activating Your Phone - Samsung Intensity SCHU450 User Manual

Portable dual-band mobile phone
Hide thumbs Also See for Intensity SCHU450:
Table of Contents

Advertisement

Insert the smaller end
2.
of the Travel Adapter
into the charger/
accessory connector
on the lower left side of
your phone.
Warning!: Your touch screen responds best to a light touch from the pad of
your finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty (see "Warranty
Information" on page 127).
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low Battery Indicator
The battery indicator (
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Five bars (
) indicate a full charge.
An empty battery icon (
A blinking empty battery icon (
have two to three minutes before the battery is too low to operate the
phone.
Correct
) in the upper-right corner of the
) indicates a near empty battery.
) and a tone sounding indicate you
If you continue to use your phone without charging its battery, the
phone will shut down.

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
Incorrect
guide to fully understand the services your phone supports.
Turn Your Phone On
Press and hold
1.
more seconds.
Note: As with any other radio-transmitting
device, do not touch the antenna
while using your phone as this can
affect call quality and can cause the
phone to operate at a higher power
level than is necessary.
The phone begins searching
2.
for a network signal.
Once the phone finds a signal,
3.
the time, date, and day appear
in the second line of the
display.
You're now ready to place and receive calls.
4.
for two or
Getting Started
Press
& Hold
Antenna
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents