Activating Your Phone - Samsung SCH-n330 Series User Manual

Activating Your Phone

Contact metroPCS and follow their instructions for
obtaining service. We suggest that you read this guide to
fully understand the services your phone supports.
Important! You should fully charge the battery in your phone before first
use, otherwise you could damage the battery. For details, see "Charge the
battery" on page 29.
Turn your phone on
1. Open the pop-up display
on your phone (as shown)
by simultaneously
pressing both pop-up
display buttons located on
each side of the phone.
2. Press and hold
two or more seconds.
3. The phone begins
searching for a network signal.
Note: As with any other radio-transmitting device, do not touch the
antenna area (top rear of your phone) as that affects receive signal strength
and call quality and may cause the phone to operate at a higher power
level than is necessary.
4. Once the phone finds a signal, the metroPCS name, the
time, date, and day appear in the display.
5. You're now ready to place and receive calls.
10
for