Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 67

Application settings
Set the supplementary cyclic settings, safety communication settings, and other parameters of the CC-Link IE Field Network
master/local module. Display the application settings. Then, select and input parameters as shown below. Complete the input.
Then, click the [Apply] button in the lower right of the window. When setting "Safety Function Setting", double-click a line of
the safety function setting in item window, or click the right-side button to be displayed when selecting line.
Window
Displayed items
Setting classifications
Application Settings Supplementary Cyclic Settings
Interrupt settings
IP Address
Communication mode
Parameter name
Dynamic Routing
Event reception from other stations
Module operation mode
Interlink transmission settings
Setting of safety communication use or not
Safety Communication Setting
CCIEF master (1)
Refer to Supplementary Cyclic Settings.
Do not set.
Do not set.
Normal
(Blank)
Enable
Enable
Online
Do not set.
Use
Refer to Safety Communication Setting.
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.1 System Configured by a Safety CPU
5
65