Install Hard Drive - Samsung SNK-D85121BF User Manual

instAll HArd drive

Do not remove the hard drive when NVR is operating.
`
M
installation of Hard drive
1. When power supply is disconnected, remove the screws at both
sides with screwdriver, then remove the screws on the rear board,
and then remove top cover of NVR.
2. Connect data and power cables of hard drive to motherboard.
Mount the hard drive by mounting it onto the rack and connecting
the power and data cables. Two groups of screw mounting
holes are provided in the base frame of the NVR, respectively for
installation of 3.5' hard drive and 2.5' hard drive. User should make
selection based on their hard drive size.
3. First mount the screws onto the rear board and then mount the
sides.

English _7