Get Close to NVR
1. Insert the LAN cable through each component as shown below:
Fastening back cover -> Fastening rubber gasket -> RJ45
connector protector cap
2. Insert the fastening rubber gasket into the RJ45 protector cap so
the inner diameter of the fastening rubber gasket is tightened when
the back cap is screwed on.
10_ Get Close to NVR
RJ45 connector protector cap
RJ45 male connector
Waterproof
rubber
gasket
(Female)
Connect the RJ45
RJ45 connector protector cap
male and
Keep fastening rubber gasket
female
connectors
Tightly screw the protector cap
Tightly screw the back cap clockwise
* (Caution) Gasket
direction
separate