Install Hard Drive - Samsung SNK-D5081 User Manual

1.4 Install Hard Drive

Notes: Do not remove the hard drive when NVR is operating.
Installation of Hard Drive:
(1) When power supply is disconnected, remove the screws at both sides with screwdriver, then
remove the screws on the rear board, and then remove top cover of NVR.
(2) Connect data and power cables of hard drive to motherboard. Mount the hard drive by
mounting it onto the rack and connecting the power and data cables. Two groups of screw
mounting holes are provided in the base frame of the NVR, respectively for installation of 3.5'
hard drive and 2.5' hard drive. User should make selection based on their hard drive size.
(3) First mount the screws onto the rear board and then mount the sides.
8