Samsung SNK-D85121BF User Manual page 39

download and installation of plugin for Mac sAfAri
Enter IP address of NVR in address bar of Mac SAFARI, for example,
http://192.168.1.200, and click on "download" to download the plugin.
Locate the downloaded plugin "WebPluginN.dmg" and double click on it
Install the plugin by double clicking on "webpluginN.pkg".
Click on "Continue">"Install". Enter user name and password for login to Apple computer. Click on "Install">"Shut down" to
finish installation.
Shut down Mac SAFARI browser and restart it, and then enter IP address of
NVR in address bar to access login page.
The above instructions are for first time installations. You can use the same plug-in
`
M
for IE and Google Chrome. If plug-in for windows OS was installed on IE or Google
Chrome once, you need to use IE which needs to be run as administrator.Use
Google Chrome to log in to NVR.
If you use Google Chrome to log in, please use Version 44 or lower. Please note
that it doesn't support V45 or above.
When you do a firmware upgrade, you have to re-download and re-install the plug-in. Based on different situations, it may not be able to install
the plug-in through browsers. In this case, please copy and install the plug in on the CD attached(WebPluginN_Windows_YYYY_MM_DD.exefor
Windows system, and WebPluginN_Mac_YYYY_MM_DD.dmg for Mac).
English _39