Polycom VVX 600 User Manual page 61

After you have followed the procedures for connecting your headset and enabled EHS, you can use the
controls on your headset to answer, mute, and end calls. If supported on your headset, you can also place calls
on hold. See your headset's user documentation for information on controlling calls from your headset.
When you are in an active call and you receive an incoming call, you cannot use the hookswitch control on your
headset to place the active call on hold and answer the incoming call. Pressing the hookswitch control on the
headset ends the active call and answers the incoming call. To place the existing call on hold and answer the
incoming call, answer the call on your phone.
If you want to disconnect or change your headset, you need to properly detach your headset from your phone.
To disconnect a headset:
1 Navigate to Settings > Basic > Preferences > Headset > Hookswitch Mode.
2 Select Regular Mode.
3 Remove the EHS adapter from the serial port on the back of the phone.
VVX 600/601 phones support Bluetooth headsets as well as analog and USB headsets. If your system
administrator has enabled Bluetooth capability for your phone, you can use a Bluetooth headset to handle calls.
When a Bluetooth headset is connected and in use, the headset key
of headsets connected to your phone, the Bluetooth headset is used automatically for all calls.
This section provides you with information on how to enable Bluetooth on your VVX 600/601, how to pair and
connect your Bluetooth headset, how to use your Bluetooth headset with your phone, and how to disconnect
and remove your headset.
glows blue. If you have multiple types
54