Polycom VVX 600 User Manual page 26

You can set up your phone to automatically answer calls using the Auto Answer feature. When this feature is
enabled, your phone automatically answers all incoming calls using the speakerphone. Your system
administrator sets how many times your phone rings before the call is automatically answered.
When Auto Answer is enabled and you receive an incoming call while in a call, the incoming call is not
answered until you end or hold the current call.
To enable your phone to automatically answer calls:
1 Navigate to Settings > Basic > Preferences > Auto Answer.
2 From the Auto Answer screen, select Auto Answer SIP Calls, and select Yes.
3 If your phone supports H.323 protocol, select Auto Answer H.323 Calls, and select Yes. This option is
displayed only if your phone supports the H.323 protocol.
4 Select Microphone Mute, and choose Yes (the default setting) to mute the microphone for auto-
answered calls.
6 Select Save.
These settings are applied to all incoming calls on your phone.
When you receive an intercom call on your phone, the call is answered automatically using the speakerphone.
You can switch to the handset or headset after the call is answered (see the section
Headset, and Speakerphone).
If your phone is set up to answer intercom calls with your microphone muted, you need to unmute your
microphone before responding to the call.
To answer and respond to an intercom call with mute enabled:
» After the call is answered, press the Mute key and reply.
You can answer calls using the line keys on your VVX phone or from your VVX Expansion Module. See the
section Connecting Polycom VVX Expansion Modules to Your Phone
modules
.
To answer calls:
» Press the expansion module line key with a flashing green LED indicator.
Switch among the Handset,
for more information on using expansion
19