Polycom VVX 600 User Manual page 63

When your Bluetooth headset is turned on, paired, and connected with your phone, you can perform the
following tasks:
● Use the headset to handle calls, including muting and adjusting the call volume.
● Initiate and end calls on your headset by pressing the Headset key
headset.
● Switch to handset or speakerphone mode during a headset call by picking up the handset or pressing the
Speakerphone key
When you turn the headset off, the headset is no longer connected but remains paired to your phone. When you
turn the headset back on, the headset is reconnected.
You can disconnect your headset from your phone, but still keep it paired. When you disconnect a headset, it
remains paired so you can easily connect it to your phone again.
You can also remove your headset so that it is no longer paired or connected. When you remove your headset,
it won't display in the Manage BT Headsets screen. To connect it back to your phone, you'll need to scan for
the device, add it, and connect it again.
To disconnect and remove your headset:
1 Navigate to Settings > Basic > Bluetooth Settings > Manage BT Headsets.
2 From the Manage BT Headsets screen, select your headset, and select Disconnect.
Your headset remains paired to your phone but is no longer connected.
3 Select your headset, and select Remove.
Your headset is removed from the list and is no longer paired or connected with your phone.
Tip: How to quickly connect and disconnect your headset
You can quickly disconnect your headset by turning your headset off. When you turn it off, the
message "Headset removed" is displayed. When you turn your headset back on, the headset is
connected again.
.
, or using a control on the
56