Samsung VP-DX100H User Manual page 96

connecting to AV devices
RECORDING (COPYING) A TV PROGRAMME OR EXTERNAL CONTENTS ONTO A DISC
(VP-DX100i/DX103i/DX105i ONLY)
• The Recording (Copying) function works only in the DVD
camcorder play mode. page 21
• Connect your DVD camcorder to a VCR or a TV using the
AV jack to record a TV programme or copy a video tape to
a disc.
• Make sure to set "AV In/Out" to "In" before connecting to
an external device. page 81
Recording (Copying) onto a Disc
1. Connect the DVD camcorder to your VCR, DVD/HDD
recorders or TV with AV cable.
• Connect the AV cable to the output jack on your VCR,
DVD/HDD recorders or TV.
• The yellow jack: Video
• The white jack: Audio (L) – Mono
• The red jack: Audio (R)
2. Insert an empty disc in your DVD camcorder.
• Please refer to pages 102~103 for selecting and formatting discs.
To record from a VCR or DVD/HDD recorders
1. Insert the tape to be played in your VCR or DVD/HDD recorders.
• Pause at the starting point of playing.
2. Start copying by pressing the Recording start/stop button on your DVD camcorder.
3. Press the PLAY button on your VCR or DVD/HDD recorders to play the tape.
To record from a TV
1. Select a TV channel to be recorded.
2. Start recording by pressing the Recording start/stop button on your DVD camcorder.
When recording (copying) is complete:
Press the Recording start/stop button on your DVD camcorder to stop recording(copying).
• If you operate the DVD camcorder connected to another device, always connect the DVD camcorder to an AC outlet using
the AC power adapter.
• Copy-protected contents such as Macrovision or unstable TV signals cannot be recorded on this DVD camcorder.
90_ English
VCRs or DVD/HDD recorders
DVD camcorder
Signal fl ow
AV cable
TV
STBY 0:01:00
In