Samsung VP-DX100H User Manual page 62

digital camera mode
RECORDING MOVIE IMAGES
• You should set the Storage mode switch to CARD before recording on a memory card.
• You can record movie images using the remote control. (VP-DX104/DX105( i ) only)
page 13
• This DVD camcorder provides two Recording start/stop buttons. One is on the rear
side of the camcorder and the other is on the LCD panel. Select the Recording start/
stop button that works best for you.
1. Turn the DVD camcorder on.
• Connect a power source to the DVD camcorder.
(A battery pack or an AC power adaptor)
• Slide the POWER switch downwards to turn the DVD camcorder on.
• Set the Storage mode switch to CARD. page 30
2. Check the subject on the LCD screen. (Lens and LCD)
• Set the Lens open/close switch to open ( ). page 10
3. Press the Recording start/stop button.
• The (●) recording indicator will display, and recording will start.
• Press the Recording start/stop button again to stop recording.
4. When recording is finished, turn the DVD camcorder off.
• You can use the zoom function while recording. page 37
• For more details about recording, refer to the page 63.
• The movie images are recorded in the 4:3 aspect ratio on the memory card.
• The recorded movie image size is 720X576.
56_ English
(VP-DX103( i )/DX104/DX105( i ) onl y )
STBY 0:00:00 [64 min]
4830
0:00:00 [30 min]
