Table of Contents
Advertisement
Changing the sensitivity of the bodypack transmitter's line
input
To adjust the sensitivity of the line input to match the connected audio source:
Make sure that the line input is switched on (see previous section)�
Connect the external audio source, switch it on and start playback�
button 10�
Press the
SET
The operating menu appears and the first menu item „CHAN" flashes on the
display�
Repeatedly press the
play and the
LINE
Press the
SET
button 10�
The current input sensitivity and the
play�
▲
▼
Press the
/
LINE
level display
the yellow LED
PEAK 8
Press the
SET
button
„STORED" briefly appears on the display, indicating that the sensitivity of the
line input has been stored�
CH 03
LINE
MIC
Changing the sensitivity of the bodypack transmitter's
microphone input
To adjust the sensitivity of the microphone input to match the connected micro-
phone:
Connect the microphone, position it correctly (refer to the microphone's in-
struction manual) and speak into the microphone as usual�
Press the
SET
button 10�
The operating menu appears and the first menu item „CHAN" flashes on the
display�
Repeatedly press the
play and the
MIC
button 10�
Press the
SET
▲
▼
/
rocker button
5
level display
appears�
rocker button
9
to change the input sensitivity so that the
shows full deflection during the loudest passages, but
5
does not light up permanently�
10
to permanently store the setting�
▲
▼
/
rocker button
Level display
appears�
4
9
until „SENSIT" flashes on the dis-
LINE
level display
5
8
9
10
9
until „SENSIT" flashes on the dis-
Tourguide 2020-D | 127
Operation
appear on the dis-
Advertisement
Table of Contents
