Table of Contents
Advertisement
Muting the devices
Muting the bodypack transmitter
Slide the
MUTE
LOW BATT/MUTE 7
The red LED
play
no longer shows any deflection� The bodypack transmitter's micro-
4
phone input is muted�
4
2
Note: The muting function (MUTE) mutes the microphone input
line input 4� This function enables a pre-recorded track to be played through
the line input without being disturbed by the tour guide's microphone� When
the track has finished, the guide can un-mute the microphone and continue
talking�
To deactivate the muting function:
Slide the
MUTE
The red LED
LOW BATT/MUTE 7
LINE
level display
Muting the radio microphone
Turn the protective cap
Slide the
MUTE
„MUTE" appears on the display of the radio microphone� After 5 minutes,
„CH
OFF" appears on the display (see „Display of the energy saving mode"
on page 89)�
To deactivate the muting function:
Slide the
MUTE
12
2
switch
to the left, to „MUTE"�
lights up permanently� The
3
LINE
MIC
switch
2
back to the right�
goes off� The
indicate the current levels�
5
6
so that the
switch
12
in the direction of the arrow�
12
switch
back in order to transmit the audio signal again�
6
CH 03
MIC
level display
MUTE
switch
12
becomes accessible�
Tourguide 2020-D | 125
Operation
MIC
level dis-
3
but not the
and the
4
Advertisement
Table of Contents
