Table of Contents
Advertisement
Setting the receiver channel(s) using the channel copy function
EZL 2020-20 L/L 2021-40
The channel copy function lets you simultaneously set a maximum of 19 re-
ceivers in the charging case/charger to the same channel� This is achieved by
copying the current channel of the receiver placed into the charging compart-
ment with channel copy function (master)
charging case/charger�
Place all receivers which are to be set to the same channel into the charging
compartments for receivers (slaves, light blue in the diagram) 5/1�
Switch on the receiver whose channel you want to copy�
Place this receiver into the charging compartment with channel copy func-
tion (master) 10/2�
The LED
COPY AVAILABLE 8/3
function is available�
Press the
COPY
The displays of all receivers which are successfully set to the same channel
light up�
5
10
EZL 2020-20 L
Notes:
•
If you do not press the
charging compartment with channel copy function (master)
matically switch off after approx� 2 minutes�
•
If the receivers' built-in rechargeable batteries are not discharged, you can
use the channel copy function even when the charging case ELZ 2020-20 L
is not connected to the mains�
lights up green as long as the channel copy
9/4
button
to start the channel copy function�
8
9
COPY
button
10/2
to all other receivers in the
1
2
L 2021-40
9/4
the receiver placed into the
Tourguide 2020-D | 123
Operation
4
3
10/2
will auto-
Advertisement
Table of Contents
