Sennheiser Tourguide 2020-D Instruction Manual page 36

Connecting the charger to a PC
You can connect one or several chargers to a PC� The supplied "Conference
Control" software allows you to centrally and easily configure and monitor
several chargers and receivers�
For this, the charger requires a network connection with a PC� The charger can
be connected directly to an individual PC or integrated into an existing net-
work� The charger cannot communicate with several PCs at the same time�
The charger also functions without connection to a PC�
Connecting the network cable
Use a standard network cable (RJ45 CAT�5E, to be ordered separately) to
connect the network socket
Install the "Conference Control" software�
Configure the network communication between the "Conference Control"
software and the charger (see the instruction manual of the "Conference
Control" software on the enclosed CD)�
9
Putting the components into operation
9 and an Ethernet socket of the network�
Tourguide 2020-D | 109