Table of Contents
Advertisement
Putting the components into operation
Setting up the charger
CAUTION
DANGER DUE TO HEAT ACCUMULATION!
The charger and the receiver rechargeable batteries can get very hot during
charging� If the heat cannot dissipate, the devices can be damaged�
Make sure that the air vents of the charger are not covered or blocked�
Provide sufficient ventilation so that the maximum ambient temperature of
the charger does not exceed 40°C�
Keep the charger away from heat sources and never expose it to direct sun-
light�
The charger can be:
•
placed on a table or cabinet
•
installed in a 19" rack
•
installed in a cabinet or similar�
When using the "Conference Control" software, it automatically sorts all char-
ger displays according to ascending serial numbers� The assignment of the
charger displays of the software to the chargers becomes easier and clearer if
you install the chargers according to ascending serial numbers�
Placing the charger on a table or cabinet
The charger has four plastic feet to ensure that it cannot slip on the surface on
which it is placed�
CAUTION
RISK OF STAINING OF FURNITURE SURFACES!
Some furniture surfaces have been treated with varnish, polish or synthetics
which might cause stains when they come into contact with other synthetics�
Despite a thorough testing of the synthetics used by us, we cannot rule out the
possibility of staining�
Do not place the charger on delicate surfaces�
Place the charger on a table, cabinet or similar�
106 | Tourguide 2020-D
Advertisement
Table of Contents
