BenQ ST750K User Manual page 35

Name
Menu Time
Sleep Time
Auto BackLight Turn the auto backlight on or off.
BackLight
Power Mode
Boot Source
Power Save
Power Logo
HDMI EDID
Version
HDR
Restore User
Default
Software
Update (USB)
Adjust the menu display time: 5 Seconds, 10 Seconds, 15 Seconds,
30 Seconds, Always.
Set the waiting time before standby: Off, 10 Minute, 20 Minute, 30
Minute, 60 Minute, 90 Minute, 120 Minute, 180 Minute, 240
Minute.
Adjust the backlight control to suit your personal needs (0-100).
There are three modes:
• Power on: Automatically power on when the supplied power cord is
connected.
• Power off: Automatically enter standby mode when the supplied power
cord is connected.
• Last status: Automatically return to the status before power failure
when the supplied power cord is connected (Power on/Power off).
There are eight options: Last Input, AV, HDMI1, HDMI2, HDMI3,
Android.
There are three modes:
• Off: The system won't go into power-saving mode or do any action
without an external signal source. The system will keep the power-on
state.
• High: In the absence of an external signal source over five minutes, the
system will enter standby mode/shutdown.
• Low: In the absence of an external signal source over five minutes, the
system will enter blank (backlight off, audio off, blinking). The external
signal source is shown when it lights up the screen.
Users can decide if they want the BenQ logo to be shown when the
machine is turned on: Default, Off. (The function is optional, please refer
to the actual product.)
Adjusts the output signal's image resolution to match the display's native
resolution. Available options are EDID 1.4 or EDID 2.0.
There are four options: Off, Low, Middle, High.
Reset all the settings to default.
Update the Fireware by USB port.
USB 3.0 does NOT support this function.
The OSD (On-Screen Display) menu
Description
35