Installing Additional Drive Enclosures; Installable Drive Enclosures; Drive Enclosure Handling Instructions - Fujitsu ETERNUS DX60 S3 Operation Manual

4. Component Expansion/Function Enhancement

Installing Additional Drive Enclosures

Installing Additional Drive Enclosures
Drive enclosures can be installed while the ETERNUS DX is running without affecting the system.
This section explains how to install drive enclosures in the ETERNUS DX.

Installable Drive Enclosures

For installable drive enclosures, refer to "Product List".

Drive Enclosure Handling Instructions

■
About Condensation
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Do Not
Do not uninstall or move a drive enclosure that is already installed.
•
Contact your sales representative or maintenance engineer if a drive enclosure needs
to be uninstalled or moved.
Do
When installing the ETERNUS DX, secure the rack to the floor to prevent the rack from
•
moving out of place or from toppling over. For details on the rack installation require-
ments, refer to "Site Planning Guide".
Do
When moving a drive enclosure from a cold place, such as an unconditioned store
•
house in winter, to a warmer place such as an air-conditioned room, the severe tem-
perature change may result in condensation forming.
To avoid this, allow the packed drive enclosure sufficient time in the warmer place
(one hour for each 15°C of temperature difference) to adapt to the new temperature.
54
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0