Samsung OfficeServ 7100 series System Description page 20

CHAPTER 2. Ошибка! Используйте вкладку "Главная" для применения 제목 1,장 제목 1 к тексту, который должен
здесь отображаться.
Maintenance
OfficeServ 7100 hardware is designed to be maintained with ease and safety.
The specification of 19-inch rack is observed. The rack is designed to maintain

sufficient strength.
 The installers or maintainers can connect cable easily because the ports to be
connected to outside are placed on the front panel.
 The front of each module has a LED that indicates failures or operation status so that
the operator can easily identify system failures.
 The back of the rack has a ground hole to which a wrist strap for preventing static
electricity can be connected.
 OfficeServ 7100 hardware is designed to protect electronic devices from damages
caused by external environment while installing or recovering.
Fire Resistance and Heat Processing
OfficeServ 7100 hardware is made of fire-resistant materials and parts to protect the
hardware from fire. OfficeServ 7100 hardware is designed not to affect system
performance due to heat generated from inside of the system.
 A specific heat-generated part of the hardware is blocked in order not to affect
temperature-sensitive components.
A 60 mm fans for cooling are installed to exhale internal air to outside.

The parts installed into the modules are located on the basis of heat distribution.

2-2
© SAMSUNG Electronics Co., Ltd.