Configuring Session Manager; Creating A Session; Configuring Acls In A Session - Cisco Nexus 3548 series Configuration Manual

Configuring Session Manager

Configuring Session Manager

Creating a Session

You can create up to 32 configuration sessions.
Procedure
Step 1
Step 2
Step 3

Configuring ACLs in a Session

You can configure ACLs within a configuration session.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
76
Command or Action
switch# configure session name
(Optional) switch(config-s)# show
configuration session [name]
(Optional) switch(config-s)# save location
Command or Action
switch# configure session name
switch(config-s)# ip access-list name
(Optional) switch(config-s-acl)# permit
protocol source destination
switch(config-s-acl)# interface interface-type
number
switch(config-s-if)# ip port access-group name
in
(Optional) switch# show configuration session
[name]
Configuring Session Manager
Purpose
Creates a configuration session and enters
session configuration mode. The name can be
any alphanumeric string.
Displays the contents of the session.
Displays the contents of the session.
Saves the session to a file. The location can be
in bootflash or volatile.
Purpose
Creates a configuration session and enters
session configuration mode. The name can be
any alphanumeric string.
Creates an ACL.
Adds a permit statement to the ACL.
Enters interface configuration mode.
Adds a port access group to the interface.
Displays the contents of the session.