Samsung SF-5100P User Manual page 92

Tools toolbar
The buttons on this toolbar are used to work with blocks and available
only when the image window is active.
Button
Allows you to create blocks. Select
this button and draw a block with
the mouse. This block is a text by
default. The block type can be
changed by right-clicking in the
block and selecting Block Type
from the pop-up menu.
Allows you to add a part to the
active block. Click the mouse
inside the block where you want
to draw a part. Then drag it
diagonally out of the block, and
release the mouse. The block gets
the additional projection.
Allows you to remove a part from
the active block. Click the mouse
near the block where you want to
cut a part of the block. Then drag
it diagonally inside the block, and
release the mouse. The block gets
the additional projection.
Allows you to move a selected
block. Click inside the block and
drag wherever necessary.
Allows you to renumber blocks.
After choosing this button, click
the blocks in the sequence you
want them to appear in the output
text (beginning with the first one).
Allows you to delete blocks.
Allows you to add vertical lines to
the table block.
Allows you to add horizontal lines
to the table block.
Allows you to delete lines in the
table.
Function Menu equivalent
Image Choose a Tool
Create Text Block
Image Choose a Tool
Add Block Parts
Image Choose a Tool
Cut Block Parts
Image Choose a Tool
Move Blocks
Image Choose a Tool
Renumber Blocks
Image Choose a Tool
Delete Blocks
Image Choose a Tool
Add Vertical Line to Table
Image Choose a Tool
Add Horizontal Line to Table
Image Choose a Tool
Remove Line from Table
Using AnyPage Lite
4.13