Samsung CLX-6200FX User Manual page 85

CONDITION SUGGESTED SOLUTIONS
Toner smear • Clean the inside of the machine. See page
63.
• Check the paper type and quality. See page
33.
• Remove the toner cartridge and install a
new one. See page 66.
Vertical repetitive If marks repeatedly appear on the printed side
of the page at even intervals:
defects
• The toner cartridge may be damaged. If a
repetitive mark occurs on the page, print a
cleaning sheet several times to clean the
cartridge. After the printout, if you still have
the same problems, remove the toner
cartridge and install a new one. See page
66.
• Parts of the machine may have toner on
them. If the defects occur on the back of
the page, the problem will likely correct
itself after a few more pages.
• The fusing assembly may be damaged.
Contact a service representative.
Background scatter Background scatter results from bits of toner
randomly distributed on the printed page.
• The paper may be too damp. Try printing
with a different batch of paper. Do not open
A
packages of paper until necessary so that
the paper does not absorb too much
moisture.
• If background scatter occurs on an
envelope, change the printing layout to
avoid printing over areas that have
overlapping seams on the reverse side.
Printing on seams can cause problems.
• If background scatter covers the entire
surface area of a printed page, adjust the
print resolution through your software
application or the printer properties.
Misformed • If characters are improperly formed and
characters producing hollow images, the paper stock
may be too slick. Try a different paper. See
page 33.
• If characters are improperly formed and
producing a wavy effect, the scanner unit
may need service. For service, contact a
service representative.
CONDITION SUGGESTED SOLUTIONS
Page skew • Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
33.
• Ensure that the paper or other material is
loaded correctly and the guides are not too
tight or too loose against the paper stack.
Curl or wave • Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high
temperature and humidity can cause paper
curl. See page 33.
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
Wrinkles or creases • Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
33.
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
Back of printouts • Check for leaking toner. Clean the inside of
are dirty the machine. See page 63.
Solid Color or • The toner cartridge may not be installed
Black pages properly. Remove the cartridge and reinsert
it.
• The toner cartridge may be defective and
A
need replacing. Remove the toner cartridge
and install a new one. See page 66.
• The machine may require repair. Contact a
service representative.
Troubleshooting_ 85