Using Setip Program; Setting Up The Printer; For A Network-Connected Macintosh - Samsung CLX-6200FX User Manual

Using SetIP program

This program is for the network IP setting using the MAC
address which is the hardware serial number of the network
printer card or interface. Especially, it is for the network
administrator to set several network IPs at the same time.
You can only use SetIP program when your machine is
connected to a network.
SetIP program should be automatically installed during the
printer driver installation.
N
: If you select Typical installation for a network
OTE
printer during the printer driver installation, the SetIP
program automatically runs after the installation. Follow the
below instruction.
1
The certificate window appears, click Trust.
2
Print the machine's network information report which
includes your machine's MAC address.
3
Click in the SetIP window to open the TCP/IP
configuration window.
4
Enter the network card's MAC address, IP address, subnet
mask, default gateway, and then click Apply.
N
: when you enter the MAC address, enter it without
OTE
colon(:).
5
The machine prints the network information. Confirm all
the settings are correct.
6
Close the SetIP program.
Starting the program
If you want to change your network printer IP setting, follow
the below instruction.
1
Print the machine's network information report which
includes your machine's MAC address.
2
Open the Library folder → Printers → Samsung → Your
printer model name → SetIP.
3
Double click the SetIPApplet.html file.
4
The certificate window appears, click Trust.
5
Click in the SetIP window to open the TCP/IP
configuration window.
6
Enter the network card's MAC address, IP address, subnet
mask, default gateway, and then click Apply.
when you enter the MAC address, enter it without colon(:).
7
The machine prints the network information. Confirm all
the settings are correct.
8
Close the SetIP program.
42
Using Your Printer with a Macintosh

Setting Up the Printer

Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.

For a Network-connected Macintosh

N
: Some printers do not support a network interface.
OTE
Before connecting your printer, make sure that your
printer supports a network interface by referring to Printer
Specifications in your Printer User's Guide.
1
Follow the instructions on "Installing Software" on page 41
to install the PPD file on your computer.
2
Open the Applications folder → Utilities, and Print
Setup Utility.
For MAC OS 10.5, open System Preferences from the
•
Applications folder, and click Printer & Fax.
3
Click Add on the Printer List.
For MAC OS 10.5, press the "+" icon then a display
•
window will pop up.
4
For MAC OS 10.3, select the Rendezvous tab.
For MAC OS 10.4, click Default Browser and find the
•
Bonjour.
• For MAC OS 10.5, click Default and find the Bonjour.
The name of your machine appears on the list. Select
SEC000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your machine.
5
For MAC OS 10.3, if Auto Select does not work properly,
select Samsung in Printer Model and your printer
name in Model Name.
For MAC OS 10.4, if Auto Select does not work properly,
•
select Samsung in Print Using and your printer name
in Model.
For MAC OS 10.5, if Auto Select does not work properly,
•
select Select a driver to use... and your printer name
in Print Using.
Your machine appears on the Printer List and is set as the
default printer.
6
Click Add.