Replacing The Toner Cartridge - Samsung CLX-6200FX User Manual

Hide thumbs Also See for CLX-6200FX:
Table of Contents

Advertisement

4. Slide the toner cartridge back into the machine.
5. Close the front cover. Make sure the cover is securely latched.
If the front cover is not completely closed, the machine will not
operate.

REPLACING THE TONER CARTRIDGE

The machine uses four colors and has a different toner cartridge for each
one: yellow (Y), magenta (M), cyan (C), and black (K).
The status LED and the toner-related message on the display indicates
which each individual toner cartridge should be replaced.
For the CLX-6200FX, CLX-6210FX, CLX-6240FX, incoming faxes are
saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of
toner cartridge for your machine. (See "" on page 91.)
1. Turn the machine off, then wait a few minutes for the machine to cool.
2. Using the handle, completely open the front cover.
Do not touch the green surface, the OPC drum or the front of
each toner cartridge, with your hands or any other material. Use
the handle on each cartridge in order to avoid touching this area.
Be careful not to scratch the surface of the paper transfer belt.
If you leave the front cover open for more than a few minutes, the
OPC drum can be exposed to light. This will cause damage to the
OPC drum. Close the front cover should the installation need to
be halted for any reason.
3. Grasp the handles on the toner cartridge and pull to remove the
cartridge from the machine.
When you open the front cover, be careful not to touch the
underneath of the control panel (the lower part of the fuser unit). The
temperature of the fuser unit might be high and could damage your
skin.
When you open the front cover and work inside the machine, it is
highly recommend that you remove the paper transfer belt first.
Because the work you do could contaminate the paper transfer belt.
4. Take a new toner cartridge out of its package.
Don't use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface of
the toner cartridge.
To prevent damage, do not expose the toner cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
Maintenance_ 67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents