Oil Life Reset; Instrument Cluster Display- If Equipped - Dodge Grand Caravan 2018 User Manual

• Down Button
Push and release the down but-
ton to scroll downward through
the main menu items.
• Right Button
The right button allows access to
information in instrument clus-
ter display submenus, selects
some feature settings, and resets
some instrument cluster display
features. The instrument cluster display
prompts the driver when the right button can
be used by displaying the right arrow graphic.
Once the right button has been selected for the
desired submenu list, follow the instrument
cluster display prompts to properly select the
desired submenu instrument cluster display
features.
• BACK Button
Push and release the BACK but-
ton to scroll back to a previous
menu or sub-menu.

Oil Life Reset

• Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change
Required" message will display for approxi-
mately ten seconds after a single chime has
sounded, to indicate the next scheduled oil
change interval. The engine oil change indica-
tor system is duty cycle based, which means
the engine oil change interval may fluctuate,
dependent upon your personal driving style.
• Unless reset, this message will continue to
display each time the ignition is cycled to the
ON/RUN position.
• To reset the oil change indicator after perform-
ing the scheduled maintenance, refer to the
following procedure.
1. Turn the ignition to the ON/RUN position (do
not start the engine).
2. Fully press the accelerator pedal, slowly,
three times within 10 seconds.
3. Turn the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Instrument Cluster Display— If Equipped
Personal Settings allows you to set and recall
features when the transmission is in PARK. If
the transmission is out of PARK or the vehicle
begins moving, a warning message SYSTEM
SETUP NOT AVAILABLE VEHICLE NOT IN
PARK displays when you try to select "System
Setup" from the main menu.
The instrument cluster display can be used to
program the following Personal Settings. Push
the right arrow button until Personal Settings
displays, then push the down arrow button to
scroll through the settings. Push the right arrow
button to change the setting.
• Select Language • Key-Off Power Delay
• Nav-Turn By Turn • Illuminated
Approach
• Auto Lock Doors • Hill Start Assist
• Auto Unlock Doors • Flashers With Sliding
Door
• Remote Unlock • Calibrate Compass
Sequence
• Remote Start • Compass Variance
Comfort Sys.
51