Page 1 Grand Caravan 2 0 1 4 O W N E R ’ S M A N U A L...
Page 2 V EHICLES SOLD IN CANADA This manual illustrates and describes the operation of fea- With respect to any Vehicles Sold in Canada, the name Chrysler tures and equipment that are either standard or optional on Group LLC shall be deemed to be deleted and the name Chrysler this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfac- LLC vehicle. Be assured that it represents precision tion.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Arm The System .....18 A WORD ABOUT YOUR KEYS ... . .12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Seat Belts In Passenger Seating Positions ..64 DOOR LOCKS ......34 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Air Bag Deployment Sensors And Controls ..80 SAFETY TIPS ......115 ▫...
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch.
Page 15: Key Fob
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. Insert the square end of the Key Fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion.
Page 16: Removing Key Fob From Ignition
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Removing Key Fob From Ignition WARNING! (Continued) Place the shift lever in PARK. Turn the Key Fob to the • Allowing children to be in a vehicle unattended is OFF position and then remove the Key Fob. dangerous for a number of reasons.
Page 17: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 SENTRY KEY® CAUTION! The Sentry Key® Immobilizer system prevents unauthor- An unlocked car is an invitation to thieves. Always ized vehicle operation by disabling the engine. The remove the Key Fob from the ignition and lock all system does not need to be armed or activated.
Page 18: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the bulb check, it indicates that someone used an invalid Replacement Keys Key Fob to start the engine. Either of these conditions will NOTE: Only Key Fobs that are programmed to the result in the engine being shut off after two seconds.
Page 19: Vehicle Security Alarm - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 NOTE: When having the Sentry Key® Immobilizer sys- VEHICLE SECURITY ALARM — IF EQUIPPED tem serviced, bring all vehicle Key Fobs with you to the The Vehicle Security Alarm monitors the vehicle doors authorized dealer.
Page 20: To Arm The System
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE present, the Vehicle Security Alarm will ignore that To Disarm The System condition and monitor the remaining doors and ignition. The Vehicle Security Alarm can be disarmed using any of the following methods: To Arm The System •...
Page 21: Tamper Alert
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 • When the Vehicle Security Alarm is armed, the interior Tamper Alert power door lock switches will not unlock the doors. If something has triggered the Vehicle Security Alarm in The Vehicle Security Alarm is designed to protect your your absence, the horn will sound three times and the vehicle;...
Page 22: Remote Keyless Entry (Rke)
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The lights will fade to off after approximately 30 seconds, REMOTE KEYLESS ENTRY (RKE) or they will immediately fade to off once the ignition This system allows you to lock or unlock the doors and switch is turned to ON/RUN from the OFF position.
Page 23: Using The Rke Transmitter
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Using The RKE Transmitter Three-button RKE transmitters will provide basic UN- LOCK, LOCK and PANIC functions. Key Fob With Three-Button RKE Transmitter Two RKE transmitters may be supplied with the vehicle. Vehicles built without the powered options will be equipped from the factory with three-button RKE trans- Key Fob With Three-Button RKE Transmitter mitters, and those built with power options will be...
Page 24 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE (optional), power sliding doors, Remote Start feature Remote Unlock Doors And Liftgate (optional). Some features can be programmed to the Press and release the UNLOCK button on the RKE customers preferences. For example, flash headlights or transmitter once to unlock the driver’s side or twice to sound horn on lock.
Page 25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, the Remote NOTE: Pressing the LOCK button on the RKE transmit- Unlock feature can be enabled or disabled by perform- ter while you are inside the vehicle will activate the ing the following steps: Vehicle Security Alarm.
Page 26 24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Remote Lock 2. Press the LOCK button on a programmed RKE trans- mitter for at least 4 seconds, but no longer than 10 This feature will cause the horn to chirp when the doors seconds.
Page 27 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Using The Panic Alarm Power Open/Close Power Liftgate — If Equipped To turn the Panic Alarm feature on or off, press and hold Press the LIFTGATE button twice on the RKE transmitter the PANIC button on the RKE transmitter for at least one within five seconds to Open/Close the Power Liftgate.
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Open/Close Left Power Sliding Door — If RKE transmitter is pushed while the door is being Equipped power-closed, the door will reverse to the full open position. Press the LEFT Power Sliding Door button twice on the RKE transmitter within five seconds to Power Open/ If the vehicle is locked and the Vehicle Security Alarm is Close the Left Power Sliding Door.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit- following steps: ter while you are in the vehicle will activate the Vehicle Security Alarm.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not touch the battery terminals that are on the back 2. Insert the tip of the emergency key or a #2 flat blade housing or the printed circuit board. screwdriver into the slot and gently pry the two halves of the RKE transmitter apart.
Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 4. To assemble the RKE transmitter case, snap the two halves together. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: •...
Page 32: Remote Starting System - If Equipped
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Closeness to a radio transmitter such as a radio station How To Use Remote Start tower, airport transmitter, and some mobile or CB All of the following conditions must be met before the radios.
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 • Vehicle security alarm not active Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped • Ignition in Off position The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start prema- WARNING! turely:...
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive 15-minute To Enter Remote Start Mode cycles with the RKE transmitter. However, the ignition switch must be turned to the ON/RUN position. Press and release the REMOTE START button on the RKE transmitter twice within five sec- To Enter the Vehicle After Remote Start onds.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • The hazard switch is pressed NOTE: • The ignition switch must be in the ON/RUN position • The shift lever is moved out of PARK in order to drive the vehicle. •...
Page 36: Door Locks
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When To Reset Remote Start If the lock knob is down when you shut either front door, the door will lock. Make sure the keys are not inside the The vehicle can be started remotely up to a maximum of vehicle before closing the door.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 If the lock knob is rearward when you shut either side WARNING! sliding door, the door will lock. Make sure the keys are • For personal security and safety in the event of an not inside the vehicle before closing the door.
Page 38: Power Door Locks - If Equipped
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks — If Equipped If you press the power door lock switch while the Key Fob is in the ignition, and any front door is open, the A power door lock switch is on each front door trim power locks will not operate.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Automatic Door Locks — If Equipped When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The auto door lock feature can be enabled or disabled by your authorized dealer per written request of the customer.
Page 40: Windows
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE On vehicles equipped with the optional Electronic Ve- hicle Information Center (EVIC), refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. NOTE: Use the Lock Doors Automatically at 15 mph (24 km/h) and Unlock Doors Automatically On Exit features in accordance with local laws.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Power Window Lockout Switch — If Equipped The driver may lock out the rear power windows by depressing the bar switch just below the power window switches. Driver’s Power Window Switches NOTE: Power Window switches will also remain active for up to 10 minutes after the ignition switch has been turned to OFF, depending upon the accessory delay setting.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front Passenger Power Window Switch There is a single switch on the front passenger’s door trim panel which operates the passenger door window and a set of switches that lock and unlock all doors. The switches will operate only when the ignition switch is in the ON/RUN or ACC position and during power acces- sory delay.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Auto-Down Feature — If Equipped Auto Up Feature With Anti-Pinch Protection — If Equipped The front window switches may be equipped with an Auto-Down feature. Press the window switch past the The front driver and front passenger switches may be detent, release, and the window will go down automati- equipped with an Auto Up feature.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Any impact due to rough road conditions may trigger 2. Push the window switch down firmly to the second the auto reverse function unexpectedly during auto- detent to open the window completely and continue closure.
Page 45: Sliding Side Door
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and can be minimized. If the rear windows are open and buffeting occurs, open the front and rear windows together to minimize the buffeting.
Page 46: Power Sliding Side Door - If Equipped
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To keep your door operating properly, observe the fol- NOTE: The left side sliding door cannot be opened lowing guidelines: while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the •...
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Press the button on the RKE transmitter twice within five seconds to open a power sliding door. When the door is fully open, pressing the button twice within five seconds a second time will close the door. There are power sliding side door switches located on the B-pillar trim panel, just in front of the power sliding door for the rear seat passengers and in the overhead console...
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE master lock button, located in the overhead console, to door switch is pressed. To close the door, wait until it disable the switches and handles for the rear seat passen- is fully open and then press the switch again. gers.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Power Sliding Side Door Open Flash 4. A single chime will sound to signify that you have successfully completed the programming. The left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened.
Page 50: Sliding Side Door Child Protection Lock
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the power sliding door master lock switch is in the Sliding Side Door Child Protection Lock OFF position, the power sliding side door may not be To provide a safer environment for small children riding opened or closed by pressing the switch located on the in the rear seats, the sliding doors are equipped with a B-pillar trim panel, just in front of the sliding door or...
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 • When the Child Protection Door Lock system is en- gaged, (even if the inside door lock is in the unlocked position) the door can be opened only by using the outside door handle, the RKE transmitter, the switches on the overhead console or the switches located on the trim panel just in front of the power sliding door.
Page 52: To Disengage Child Protection Door Lock
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • After setting the Child Protection Door Lock system, Avoid trapping anyone in the vehicle in a collision. always test the door from the inside to make certain it Remember that the sliding doors can only be opened is in the desired position.
Page 53: Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 LIFTGATE On vehicles equipped with power locks, the liftgate can be unlocked using the Remote Keyless Entry (RKE) transmitter button, or by activating the power door lock switches located on the front doors. To open the liftgate, press the liftgate release handle located on the underside of the license plate bar and pull the liftgate open with one fluid motion.
Page 54: Power Liftgate - If Equipped
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Liftgate — If Equipped The power liftgate may be opened manually or by using the button on the Remote Keyless Entry (RKE) transmit- ter. Press the button on the transmitter twice within five seconds, to open the power liftgate.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The power liftgate may be closed by pressing the button, and several audible beeps will occur to signal that the located in the upper left trim in the liftgate opening. liftgate is opening or closing. Pushing once will only close the liftgate.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • During power operation, whether liftgate is fully open (62°C). Be sure to remove any buildup of snow or ice or fully closed, the liftgate chime will beep several from the liftgate before pressing any of the power times indicating power operation is in progress.
Page 57: Occupant Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 • An energy-absorbing steering column and steering Gas props support the liftgate in the open position. However, because the gas pressure drops with tempera- wheel ture, it may be necessary to assist the props when •...
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you will be carrying children too small for adult-sized WARNING! seat belts, the seat belts or the Lower Anchors and Tether • Never place a rear facing infant seat in front of an for CHildren (LATCH) feature also can be used to hold infant and child restraint systems.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 If a child from 2 to 12 years old (not in a rear facing child the Customer Center. Phone numbers are provided seat) must ride in the front passenger seat, move the seat under If You Need Assistance .
Page 60: Lap/Shoulder Belts
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and they WARNING! (Continued) can reduce the seriousness of injuries in a collision. Some • Seat-Mounted Side Air Bags (SAB) also need room of the worst injuries happen when people are thrown to inflate.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! WARNING! (Continued) • Wearing your belt in the wrong place could make • It is dangerous to ride in a cargo area, inside or your injuries in a collision much worse. You might outside of a vehicle.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is near the seatback of the WARNING! front seats and next to your arm in the rear seats. • A belt that is worn under your arm is dangerous. Grasp the latch plate and pull out the belt.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click”. • A belt that is buckled into the wrong buckle will not protect you properly.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull • A lap belt worn too high can increase the risk of up on the shoulder belt.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 6. To release the belt, push the red button on the buckle. Pull the strap down and secure the small latch plate of The belt will automatically retract to its stowed posi- the lap belt into the small buckle until you hear a “click”.
Page 66: Seat Belts In Passenger Seating Positions
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE pushing anywhere on the anchorage. To move the an- As a guide, if you are shorter than average you will chorage downward, squeeze the actuation buttons while prefer a lower position, and if you are taller than average simultaneously pushing down on the anchorage assem- you will prefer a higher position.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Second Row Bench Seat Second Row Captains Chairs Driver Center Passenger Driver Center Passenger First Row First Row Second Row Second Row Bench SnG Seating Seating Third Row Cinch Third Row Cinch •...
Page 68: Automatic Locking Retractor Mode (Alr) - If Equipped
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE out only the amount of webbing necessary to comfort- How To Engage The Automatic Locking Mode ably wrap around the occupant’s mid-section. Slide the 1. Buckle the combination lap and shoulder belt. latch plate into the buckle until you hear a click.
Page 69: Energy Management Feature
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Seat Belt Pretensioners WARNING! The seat belts for both front seating positions are • The belt and retractor assembly must be replaced if equipped with pretensioning devices that are designed to the seat belt assembly Automatic Locking Retractor remove slack from the seat belt in the event of a collision.
Page 70: Supplemental Active Head Restraints (Ahr)
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Active Head Restraints (AHR) This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in These head restraints are passive, deployable compo- certain types of rear impacts.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. 1 — Downward Movement Hand Positioning Points On AHR 2 — Rearward Movement 2. Position the hands on the top of the deployed AHR at a comfortable position.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 AHR In Reset Position 3 — Final Downward Movement To Engage Locking Mechanism NOTE: 4. The AHR front soft foam and trim half should lock • If you have difficulties or problems resetting the Active into the back decorative plastic half.
Page 74: Enhanced Seat Belt Use Reminder System (Beltalert®)
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System unbuckled while traveling at speeds greater than 5 mph (BeltAlert®) (8 km/h), BeltAlert® will provide both audio and visual notification. BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger The front passenger seat BeltAlert®...
Page 75: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Seat Belts And Pregnant Women WARNING! We recommend that pregnant women use the seat belts Using a seat belt extender when not needed can throughout their pregnancies. Keeping the mother safe is increase the risk of injury in a collision.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, the vehicle is equipped with a Supplemental NOTE: The Driver and Front Passenger Advanced Front Driver Side Knee Air Bag mounted in the instrument Air Bags are certified to the new Federal regulations for panel below the steering column.
Page 77: Air Bag System Components
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • Air Bag Warning Light front, and rear passengers sitting next to a window. The SABIC air bags are located above the side windows and • Steering Wheel and Column their covers are labeled: SRS AIRBAG. •...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE output appropriate to the severity and type of collision as WARNING! (Continued) determined by the Occupant Restraint Controller (ORC), • Do not put anything on or around the air bag covers which may receive information from the front impact or attempt to open them manually.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 NOTE: • Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • Being too close to the SAB air bags during deployment could cause you to be severely injured or killed.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE against or very close to SAB air bags can be seriously for side-impact head injuries. The SABIC deploy down- injured or killed. Occupants, especially children, should ward, covering both windows on the impact side. not lean on or sleep against the door, side windows, or NOTE: area where the SAB air bags inflate, even if they are in an...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 WARNING! WARNING! (Continued) • Your vehicle is equipped with SABIC air bags, do • Your vehicle is equipped with left and right not have any accessory items installed which will Supplemental Side Air Bag Inflatable Curtain alter the roof, including adding a sunroof to your (SABIC), do not stack luggage or other cargo up vehicle.
Page 82: Air Bag Deployment Sensors And Controls
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Always sit upright as possible with your back against the work with the knee impact bolsters to provide improved seat back, use the seat belts properly, and use the protection for the driver and front passenger. appropriate sized child restraint, infant restraint or Air Bag Deployment Sensors And Controls booster seat recommended for the size and weight of the...
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 severity and type of collision. Advanced Front Air Bags Because air bag sensors measure vehicle deceleration are and the Supplemental Driver Side Knee Air Bag not over time, vehicle speed and damage by themselves are expected to reduce the risk of injury in rear, side, or not good indicators of whether or not an air bag should rollover collisions.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC contains a backup power supply system that WARNING! may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment. Ignoring the Air Bag Warning Light in your instru- ment panel could mean you won’t have the air bags Also, the ORC turns on the Air Bag Warning to protect you in a collision.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 are possible, based on several factors, including the Supplemental Driver Side Knee Air Bag. The trim cover collision type and severity. The steering wheel hub trim separates and folds out of the way allowing the air bag to cover and the upper right side of the instrument panel inflate to the full size.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE at a very high speed and with such a high force that it positioned in the area where the side curtain air bag could injure you if you are not seated properly, or if items inflates.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 event the ORC will determine whether to have the NOTE: Front and/or side air bags will not deploy in all Enhanced Accident Response System perform the follow- collisions. This does not mean something is wrong with ing functions: the air bag system.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or WARNING! throat irritation, move to fresh air.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Air Bag Warning Light WARNING! (Continued) • Do not attempt to modify any part of your air bag You will want to have the air bags ready to system. The air bag may inflate accidentally or may inflate for your protection in a collision.
Page 90: Event Data Recorder (Edr)
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Whether or not the driver and passenger safety belts NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint were buckled/fastened; Controller (ORC) may also be disabled. The air bags may •...
Page 91: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 To read data recorded by an EDR, special equipment is There are different sizes and types of restraints for required, and access to the vehicle or the EDR is needed. children from newborn size to the child almost large In addition to the vehicle manufacturer, other parties, enough for an adult safety belt.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • For additional information, refer to In a collision, an unrestrained child can become a www.seatcheck.org or call 1–866–SEATCHECK. Cana- projectile inside the vehicle. The force required to dian residents should refer to Transport Canada’s hold even an infant on your lap could become so website for additional information: great that you could not hold the child, no matter...
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight or Age Recommended Type of Child Restraint Infants and Children who are two years old or Either an Infant Carrier or a Convertible Toddlers younger and who have not reached the Child Restraint, facing rearward in the rear...
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints reach the highest weight or height allowed by their convertible child seat. Safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until WARNING! they reach either the height or weight limit of their rear facing child safety seat.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 have outgrown the rear-facing weight or height limit of WARNING! their rear-facing convertible child seat. Children should • Improper installation can lead to failure of an remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height infant or child restraint.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats 4. Is the lap part of the belt as low as possible, touching the child’s thighs and not their stomach? Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend 5.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Recommendations For Attaching Child Restraints Use any attachment method shown with an “X” Below Combined LATCH – Weight of the LATCH – Restraint Type Lower Anchors Seat Belt + Top Child + Child Lower Anchors Seat Belt Only + Top Tether...
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tethers for Children (LATCH) Your vehicle is equipped with the child restraint anchor- Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 LATCH Positions For Installing Child Restraints In This Vehicle Second Row Bench Lower Anchorage Symbol 2 anchorages per seating Second Row Captains Chairs position Lower Anchorage Symbol 2 anchorages per seating Top Tether Anchorage Symbol position Top Tether Anchorage Symbol...
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraint LATCH Positions What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until weight of the child restraint) for using the the combined weight of the child and the LATCH anchorage system to attach the child child restraint is 65 lbs (29.5 kg).
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Can two child restraints be attached using Never “share” a LATCH anchorage with a common lower LATCH anchorage? two or more child restraints. If the center position does not have dedicated LATCH lower anchorages, use the seat belt to in- stall a child seat in the center position next to a child seat using the LATCH anchor-...
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Locating The LATCH Anchorages In addition, there are tether strap anchors lo- cated behind each rear seatback, near to the floor. LATCH Anchorages (Third Row 60/40 Anchorages Shown) LATCH Anchorages (Third Row 60/40 Anchorage Shown)
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraint systems will be Center Seat LATCH – Commercial Cargo Vehicles equipped with a rigid bar or a flexible strap on each side. (No Factory Installed Rear Seats) — If Equipped Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the WARNING!
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Center Seat LATCH To Install A LATCH-compatible Child Restraint If a child restraint installed in the center position blocks 1. If the selected seating position has a Switchable Auto- the seat belt webbing or buckle for the outboard position, matic Locking Retractor (ALR) seat belt, stow the seat do not use that outboard position.
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE move it to its rear-most position to make room for the 7. Test that the child restraint is installed tightly by child seat. You may also move the front seat forward pulling back and forth on the child seat at the belt to allow more room for the car seat.
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 seat belts are not toys and that they should not play with Installing Child Restraints Using The Vehicle Seat them. Belt The seat belts in the passenger seating positions are WARNING! equipped with either a Switchable Automatic Locking Retractor (ALR) or a cinching latch plate or both.
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle Second Row Bench Second Row Captains Chair...
Page 109 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 Lap/Shoulder Belt Systems What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using weight of the child restraint) for using the Child Restraint the seat belt to install a forward facing Tether Anchor with the seat belt to attach a child restraint, up to the recommended...
Page 110 108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 111 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 strap. See the section “Installing Child Restraints rear-most position to make room for the child seat. Using the Top Tether Anchorage” for directions to You may also move the front seat forward to allow attach a tether anchor.
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. Test that the child restraint is installed tightly by into the buckle again. If you still cannot make the child pulling back and forth on the child seat at the belt restraint installation tight, try a different seating position.
Page 113 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 between the two posts. If not possible, lower the head restraint and pass the tether strap around the outboard side of the head restraint. 3. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram.
Page 114: Commercial Cargo Vehicles (No Factory Installed Rear Seats) - If Equipped
112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE COMMERCIAL CARGO VEHICLES (NO FACTORY WARNING! INSTALLED REAR SEATS) — IF EQUIPPED • An incorrectly anchored tether strap could lead to Commercial cargo vehicles are not designed for use as a increased head motion and possible injury to the family vehicle and are not intended for carrying children child.
Page 115: Restraining Infants And Small Children In Commercial Cargo Vehicles
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 Restraining Infants And Small Children In Commercial Cargo Vehicles There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Use the restraint that is correct for your child.
Page 116: Engine Break-In Recommendations
114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Using the hook attached to the child restraint tether ENGINE BREAK-IN RECOMMENDATIONS strap, attach the child restraint tether strap to the A long break-in period is not required for the engine and metal anchor on the lower rear of the front passenger drivetrain (transmission and axle) in your vehicle.
Page 117: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 CAUTION! WARNING! • Do not leave children or animals inside parked Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 118: Exhaust Gas
116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
Page 119: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 Safety Checks You Should Make Inside The dealer. If the light stays on, flickers, or comes on while Vehicle driving, have the system checked by an authorized dealer. Seat Belts Defroster Inspect the belt system periodically, checking for cuts, frays, and loose parts.
Page 120 118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Always Pedals that cannot move freely can cause loss of properly reinstall and secure floor mats that have vehicle control and increase the risk of serious per- been removed for cleaning.
Page 121: Periodic Safety Checks You Should Make Outside
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 119 Periodic Safety Checks You Should Make Outside Lights The Vehicle Have someone observe the operation of brake lights and exterior lights while you work the controls. Check turn Tires signal and high beam indicator lights on the instrument Examine tires for excessive tread wear and uneven wear panel.
Page 123: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Tilt Mirrors In Reverse (Available With Memory MIRRORS ......128 Seat Only) —...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Phone Call Features ....152 ▫ Heated Seats — If Equipped ....182 ▫...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 ▫ Dimmer Controls .....218 DRIVER MEMORY SEAT — IF EQUIPPED ..209 ▫...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Rain Sensing Wipers — If Equipped ..225 PARKSENSE® REAR PARK ASSIST — IF EQUIPPED ......235 TILT/TELESCOPING STEERING COLUMN .
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 ▫ Turning ParkView® On Or Off — Without ▫ Using HomeLink® ....259 Navigation/Multimedia Radio ... .246 ▫...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Sunroof Maintenance ....264 ▫ Door Trim Panel Storage ....276 ▫...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 CARGO AREA FEATURES ....288 ROOF LUGGAGE RACK — IF EQUIPPED ..291 ▫ Rechargeable Flashlight ....288 ▫...
Page 130: Mirrors
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 131: Automatic Dimming Mirror - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Page 132: Outside Mirrors
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors by the inside automatic dimming mirror and will auto- matically adjust for headlight glare when the inside To receive maximum benefit, adjust the outside mirror(s) mirror adjusts. to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror.
Page 133: Heated Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Using the mirror control switch, press on any of the four arrows for the direction that you want the mirror to move. Left and Right side power mirror preselected positions can be controlled by the optional Driver Memory Seat Feature.
Page 134: Tilt Mirrors In Reverse (Available With Memory Seat Only) - If Equipped
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tilt Mirrors In Reverse (Available With Memory Power Folding Mirrors — If Equipped Seat Only) — If Equipped The switch for the power folding mirrors is located Tilt Mirrors in Reverse provides automatic outside mirror between the power mirror switches L (left) and R (right).
Page 135: Illuminated Vanity Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Resetting the Power Folding Outside Mirrors Illuminated Vanity Mirrors — If Equipped You may need to reset the power folding mirrors if the An illuminated vanity mirror is located on the sun visor. following occurs: To use the mirror, rotate the sun visor down and swing the mirror cover upward.
Page 136: Blind Spot Monitoring (Bsm) - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BLIND SPOT MONITORING (BSM) — IF EQUIPPED When the vehicle is started, the BSM warning light will momentarily illuminate in both outside rear view mirrors The Blind Spot Monitoring (BSM) system uses two radar- to let the driver know that the system is operational.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 vehicle when the vehicle speed reaches approximately The area on the rear fascia where the radar sensors are 6 mph (10 km/h) or higher and will alert the driver of located must remain free of snow, ice, and dirt/road vehicles in these areas.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system notifies the driver of objects in the The BSM system monitors the detection zone from three detection zones by illuminating the BSM warning light different entry points (side, rear, front) while driving to located in the outside mirrors in addition to sounding an see if an alert is necessary.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Side Monitoring Rear Monitoring Entering From The Rear Overtaking Traffic Vehicles that come up from behind your vehicle on either If you pass another vehicle slowly (with a relative speed side and enter the rear detection zone with a relative of less than 15 mph (24 km/h) and the vehicle remains in speed of less than 30 mph (48 km/h).
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE between the two vehicles is greater than 15 mph (24 km/h), the warning light will not illuminate. Overtaking/Passing The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, Overtaking/Approaching berms, etc.
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Stationary Objects Opposing Traffic The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes.
Page 142: Rear Cross Path
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 143: Modes Of Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 NOTE: In a parking lot situation, oncoming vehicles can Modes Of Operation be obscured by vehicles parked on either side. If the Modes Of Operation With EVIC sensors are blocked by other structures or vehicles, the Three selectable modes of operation are available in the system will not be able to alert the driver.
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE view mirror based on a detected object. However, when NOTE: the system is operating in RCP, the system will respond • Whenever an audible alert is requested by the BSM with both visual and audible alerts when a detected system, the radio volume is reduced.
Page 145: Uconnect® Phone - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 NOTE: The BSM system will store the current operating For Uconnect® Customer Support: U.S. residents - visit mode when the vehicle is shut off. Each time the vehicle www.UconnectPhone.com or call 1-877-855-8400. Cana- is started the previously stored mode will be recalled and dian Residents - visit www.UconnectPhone.com or call, used.
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system. Only one linked (or paired) mobile phone can be access the system. When you press the button you will used with the system at a time. The system is available in hear the word Uconnect® followed by a BEEP. The beep English, Spanish, or French languages.
Page 147: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 • For each feature explanation in this section, only the The radio display will be used for visual prompts from the Uconnect® Phone such as “CELL” or caller ID on compound form of the voice command is given. You certain radios.
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To activate the Uconnect® Phone, simply press the The following are general phone to Uconnect® Phone button and follow the audible prompts for directions. pairing instructions: Uconnect® Phone sessions begin with a press of the •...
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • You will then be asked to give your mobile phone a • The system will prompt you to say the number you priority level between one and seven, with one being want to call. the highest priority.
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Automatic download and update, if supported, begins or downloaded phonebook. To learn how to store a name in the phonebook, refer to “Add Names to Your as soon as the Bluetooth® wireless phone connection is Uconnect®...
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • This downloaded phonebook cannot be edited or • When prompted, enter the number designation (e.g., deleted on the Uconnect® Phone. These can only be “Home,” “Work,” “Mobile,” or “Other”). This will edited on the mobile phone. The changes are trans- allow you to store multiple numbers for each phone- ferred and updated to Uconnect®...
Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Edit Uconnect® Phonebook Entries After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in NOTE: the phonebook, call the number you just edited, or return •...
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 • After you enter the Phonebook Delete menu, you will Delete/Erase “All” Uconnect® Phonebook Entries then be asked for the name of the entry that you wish • Press the button to begin. to delete.
Page 154: Phone Call Features
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say mobile service plan. For example, if your mobile service “Phonebook List Names.” plan provides three-way calling, this feature can be accessed through the Uconnect® Phone. Check with your •...
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 mobile phone. Press the button to place the current Place/Retrieve a Call From Hold call on hold and answer the incoming call. To put a call on hold, press the button until you hear a single beep.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Three-Way Calling Redial • Press the To initiate three-way calling, press the button while button to begin. a call is in progress, and make a second phone call, as • After the “Ready” prompt and the following beep, say described under “Making a Second Call While Current “Redial.”...
Page 157: Uconnect® Phone Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 • After the “Ready” prompt and the following beep, say ends, or until the vehicle battery condition dictates cessation of the call on the Uconnect® Phone and the name of the language you wish to switch to transfer of the call to the mobile phone.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If supported, this number may be programmable on If the phone is not reachable and the Uconnect® Phone is operational, you may reach the emergency number as some systems. To do this, press the button and say follows: “Setup,”...
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 • After the “Ready” prompt and the following beep, say Working With Automated Systems “Towing Assistance.” This method is used in instances where one generally has to press numbers on the mobile phone keypad while NOTE: You should program the desired Towing Assis- navigating through an automated telephone system.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE “Send,” is also to be used for navigating through an Barge In – Overriding Prompts automated customer service center menu structure, and The “Voice Command” button can be used when you to leave a number on a pager. wish to skip part of a prompt and issue your voice command immediately.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 – “Setup Confirmation Prompts Off” NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect® Phone to play it on the vehicle Phone And Network Status Indicators audio system, so you will not hear it. Under this situation, If available on the radio and/or on a premium display after successfully dialing a number the user may feel that the such as the instrument panel cluster, and supported by...
Page 162: Advanced Phone Connectivity
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Advanced Phone Connectivity If you would like to connect or disconnect the Bluetooth® connection between your mobile phone and the Transfer Call To And From Mobile Phone Uconnect® Phone System, follow the instructions de- The Uconnect®...
Page 163: Things You Should Know About Your Uconnect
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 • After the “Ready” prompt and the following beep, say Select Another Mobile Phone “Setup Phone Pairing.” This feature allows you to select and start using another • At the next prompt, say “Delete” and follow the phone paired with the Uconnect®...
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phone Voice Training feature may be used. To enter this This procedure may be repeated with a new user. The training mode, follow one of the two following proce- system will adapt to the last trained voice only. dures: Reset From outside the Uconnect®...
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 • Speak normally, without pausing, just as you would • When navigating through an automated system such speak to a person sitting a few feet/meters away from as voice mail, or when sending a page, at the end of you.
Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In a convertible vehicle, system performance may be • In a convertible vehicle, system performance may be compromised with the convertible top down. compromised with the convertible top down. Far End Audio Performance Recent Calls •...
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 • After the “Ready” prompt and the following beep, say To send a message, press the button while the “SMS Read” or “Read Messages.” system is listing the message and say “Send.” • Uconnect® Phone will play the new text message for Uconnect®...
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the 10. Thanks button. • After the “Ready” prompt and the following beep, say 11. See You in 15 minutes “Setup, SMS Incoming Message Announcement,” you 12. I am on my way will then be given a choice to change it.
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167...
Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169...
Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) zero call cancel three confirmation prompts four continue five delete dial seven download eight edit nine emergency star (*) English plus (+) erase all pound (#) Espanol add location...
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) help previous home record again language redial list names return to main menu return or main menu list phones select phone select mobile send mute set up...
Page 174: General Information
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada. Operation is subject to the following conditions: The Uconnect®...
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Pressing the Voice Command button while the WARNING! system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or Any voice commanded system should be used only change commands.
Page 176: Commands
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To hear the first available Menu, press the Voice Com- Main Menu mand button and say “Help” or “Main Menu.” Start a dialogue by pressing the Voice Command button. You may say “Main Menu” to switch to the Commands main menu.
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 • “Menu Radio” (to switch to the radio menu) Radio AM • “Main Menu” (to switch to the main menu) To switch to the AM band, say “AM” or “Radio AM.” In this mode, you may say the following commands: Satellite Radio •...
Page 178 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Disc Mode Bluetooth® Streaming (BT) Mode To switch to the disc mode, say “Disc.” In this mode, you To switch to Bluetooth® Streaming (BT) mode, say may say the following commands: “Bluetooth Streaming.” In this mode, you may say the following commands: •...
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 • “Switch to system setup” – “Continue” (to continue recording) • “Main menu setup” – “Delete” (to delete the recording) • “Switch to setup” • “Play Memos” (to play previously recorded memos) — During the playback you may press the Voice Com- In this mode, you may say the following commands: mand...
Page 180: Voice Training
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect® vehicle. Voice “Voice Training” feature may be used. WARNING! 1.
Page 181: Power Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Power Seats — If Equipped Some models may be equipped with eight-way power seats for the driver and front passenger. The power seat switches are located on the outboard side of the seat. The switches control the movement of the seat cushion and the seatback.
Page 182 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Do not place any article under a power seat or Moving a seat while driving could result in loss of impede its ability to move as it may cause damage to control which could cause a collision and serious the seat controls.
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Tilting The Seat Up Or Down WARNING! (Continued) The angle of the seat cushion can be adjusted in four • Seats should be adjusted before fastening the seat directions. Pull upward or push downward on the front belts and while the vehicle is parked.
Page 184: Power Lumbar - If Equipped
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Lumbar — If Equipped Heated Seats — If Equipped Vehicles equipped with power driver or passenger seats On some models, the front and rear seats may be may also be equipped with power lumbar. The power equipped with heaters located in the seat cushions.
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Vehicles Equipped With Remote Start Press the switch once to select HIGH-level heating. Press the switch a second time to select On models that are equipped with remote start, the LOW-level heating. Press the switch a third driver’s heated seat can be programmed to come on time to shut the heating elements OFF.
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Heated Seats You can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of On some models, the second row seats are equipped with heat in use.
Page 187: Manual Front/Second Row Seat Adjuster
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 indicating the change. The LOW-level setting will turn While sitting in the seat, pull up on the handle and slide OFF automatically after approximately 45 minutes. the seat forward or rearward. Release the bar once you have reached the desired position.
Page 188: Manual Reclining Seats - If Equipped
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Reclining Seats — If Equipped To recline, lean forward slightly, lift the lever, then push back to the desired position and release the lever. Lean For models equipped with manual reclining seats, the forward and lift the lever to return the seatback to its recline lever is located on the outboard side of the seat.
Page 189: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Head Restraints Active Head Restraints — Front Seats Head restraints are designed to reduce the risk of injury Active Head Restraints are passive, deployable compo- by restricting head movement in the event of a rear nents, and vehicles with this equipment cannot be readily impact.
Page 190 188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head For comfort the Active Head Restraints can be tilted restraint. To lower the head restraint, press the push forward and rearward. To tilt the head restraint closer to button, located at the base of the head restraint, and push the back of your head, pull forward on the bottom of the downward on the head restraint.
Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information. WARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players.
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Ac- tive Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Re- straint during sudden stops.
Page 193: Stow 'N Go® Seating - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Head Restraints — Third Row NOTE: Seat will not stow in the storage bin unless the armrests are raised. The head restraint in the center position can be raised and lowered for tether routing. Refer to “Occupant Re- 4.
Page 194 192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull upward on the seatback recliner lever located on The non-adjustable head restraint and seatback will fold the outboard side of the seat. automatically during the seat tumble. No additional actuation is necessary. Seatback Recliner Lever, Seat Tumble, And Head Restraint Fold Lever Non-Adjustable Head Restraint...
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Tumbled Second Row Seat Automatic Folding Seatback The seat will automatically tumble into position for easy storage.
Page 196 194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Push the seat into the storage bin. CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. WARNING! In a collision, serious injury could result if the seat storage bin covers are not properly latched.
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 To Unstow Second Row Seats WARNING! 1. Pull up on the storage bin latch to open the cover. • In a collision, you or others in your vehicle could 2. Pull up on the strap to lift the seat out of the storage be injured if seats are not properly latched to their bin and push the seat rearward to latch the seat floor attachments.
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Return the seatback to the upright position. Raising The Head Restraint 3. Pull up on the seatback recliner lever on the outboard Raising The Seatback side of the seat to fold head rest and seatback and 2.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Easy Entry Second Row The seat will automatically fold into position for easy entry into the third row. The second row Stow ’n Go® seats allow easy entry to the third row seat or rear cargo area. WARNING! Pull up on the seatback recliner lever on the outboard In the event of a collision you could be injured if the...
Page 200: Quad Seats - If Equipped
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Quad Seats — If Equipped While sitting in the seat, pull up on the handle and slide the seat forward or rearward. Release the bar once you Both Quad seats are adjustable forward or rearward. The have reached the desired position.
Page 201 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Manual Recline WARNING! To recline, lean forward slightly, lift the lever, then push Do not ride with the seatback reclined so that the back to the desired position and release the lever. Lean shoulder belt is no longer resting against your chest.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold-Flat Easy Entry To fold the seat, lift the recliner lever to the full upward The Quad seats can be tilted forward for easy entry into position and push the seatback forward until it rests on the third row.
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 For passengers seated in the third row, there is a pull Removal strap located on the outboard side of the seat near the The Quad seats can be removed if additional storage is bottom of the seat back.
Page 204: Second Row Bench Seat - If Equipped
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Second Row Bench Seat — If Equipped Release levers are located on the rear leg assemblies, near the floor. To remove the seat, squeeze each release handle While the bench seat does not stow in the floor, it is and rotate downwards to deploy the wheels.
Page 205: Third Row Power Recline - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 To reinstall the seat, align the seat into the detent posi- tions on the floor. Squeeze the release handle and rotate upward until the lock indicator button returns into the handle. WARNING! If not properly latched, the bench seats could become loose.
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Lower the head restraint by pulling on the release strap marked “1” located on the outboard side of the head restraint. One Touch Folding Seat Third Row The rear switch bank allows multiple power folding and unfolding positions for the third row seats.
Page 207 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 NOTE: • Disconnect the center shoulder belt from the small buckle and lower the head restraints before attempting to fold/stow the power third row seats. • To abort seat operation while seat is in motion, press a different seat position selector switch to stop the seat.
Page 208: Manually Folding Third Row Seats - If Equipped
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manually Folding Third Row Seats — If Equipped 1. Lower the center head restraint down to the seatback by pushing the button on the guide and pushing the head restraint down. 2. Lower the outboard head restraints by pulling on the release strap marked “1”...
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 3. Pull release strap marked “2” located on the rear of the 4. Pull release strap marked “3” to release the anchors. seat to lower the seatback. Release Strap “3” Release Strap “2”...
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull release strap marked “4” and tumble the seat rearward into the storage bin. Stowed Third Row Seat To Unfold Third Row Seats Release Strap “4” 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch.
Page 211: Plastic Grocery Bag Retainer Hooks
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 3. Pulling strap “4” releases the seatback to return to its 2. To restore the seat to its upright position, lift up on the full upright position. seatback and push forward until the anchors latch. 4.
Page 212: Setting Memory Positions And Linking Rke
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE radio station preset settings. Your Remote Keyless Entry Setting Memory Positions And Linking RKE (RKE) transmitters can also be programmed to recall the Transmitter To Memory same positions when the UNLOCK button is pressed. NOTE: Each time the SET (S) button and a numbered button (1 or 2) is pressed, you erase the memory settings for that button and store a new one.
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 6. Press and release the SET (S) button located on the 11. Repeat the above steps to set the next Memory driver’s door. position using the other numbered Memory button or to link another RKE transmitter to memory. 7.
Page 214: Easy Entry/Exit Seat (Available With Memory Seat Only)
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1, or 2). When a recall is cancelled, the driver’s seat, and To disable another RKE transmitter linked to either the pedals stop moving. A delay of one second will occur Memory Position, repeat Steps 1 to 5 for each RKE before another recall can be selected.
Page 215 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 • When you remove the key from the ignition switch, • The Easy Entry/Easy Exit feature is disabled when the the driver seat will move about 2.4 in (60 mm) rear- driver seat position is less than 0.9 in (22.7 mm) ward if the driver seat position is greater than or equal forward of the rear stop.
Page 216: To Open And Close The Hood
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD 2. Move to the front of the vehicle and look inside the center of the hood opening. Locate, then push the To open the hood, two latches must be released. safety catch downward while raising the hood at the 1.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Use the hood prop rod to secure the hood in the open CAUTION! position. To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 12 in (30 cm) and then drop it.
Page 218: Lights
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. Headlight Switch Rotate the headlight switch to the second detent for The headlight switch is located on the left side of the headlight, parking light and instrument panel operation.
Page 219: Headlights On With Wipers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 Headlights On With Wipers — If Equipped To activate the delay feature, turn OFF the ignition switch while the headlights are still on. Then turn off the When your headlights are in the AUTO mode and the headlights within 45 seconds.
Page 220: Lights-On Reminder
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The headlights must be turned off within 45 the turn signal activation. Once the turn signal is no seconds of turning the ignition OFF to activate this longer active, the DRL lamp will illuminate. feature.
Page 221 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 Interior Lighting On Rotate the left dimmer control completely upward to the second detent (extreme top position) to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. Interior lights are also turned on when a door or liftgate is opened, the Remote Keyless Entry (RKE) transmitter is activated, or when the dimmer control is moved to the...
Page 222 220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The key must be out of the ignition switch or the The Halo control switch is located to the right of the ignition switch must be in the OFF position for this dimmer switch.
Page 223: Multifunction Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 • Headlight Beams Low/High Multifunction Lever • Flash-To-Pass (Optical Horn) The multifunction lever is located on the left side of the steering column. • Front and Rear Wipers — Washer Functions Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
Page 224: Lane Change Assist
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signal Warning Flash-To-Pass If the vehicle electronics sense that the vehicle has You can signal another vehicle with your headlights by traveled at over 18 mph (29 km/h) for about 1 mile lightly pulling the multifunction lever toward you.
Page 225: Windshield Wiper And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 WINDSHIELD WIPER AND WASHERS NOTE: Always remove any buildup of snow that pre- vents the windshield wiper blades from returning to the The wipers and washers are operated by a switch within off position. If the windshield wiper switch is turned off the multifunction lever.
Page 226: Intermittent Wiper System
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Windshield Washers Use the intermittent wiper when weather conditions To use the Washer, push on the end of the lever to the make a single wiping cycle with a variable pause be- second detent and hold while spray is desired.
Page 227: Rear Wiper And Washer
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Rear Wiper And Washer The sensitivity of the system is adjustable from the multifunction lever. Wiper sensitivity position 3 has been Rotating the rotary ring to the first detent activates the calibrated for best overall wiping sensitivity. If the opera- rear intermittent wipers.
Page 228 226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Rain Sensing feature can be turned on and off • Neutral Wipe Inhibit — The Rain Sensing feature will through the EVIC (if equipped). Refer to “Electronic not operate when the ignition is ON, and the transmis- Vehicle Information Center (EVIC)/Personal Settings sion shift lever is in the NEUTRAL position, and the (Customer-Programmable Features)”...
Page 229: Tilt/Telescoping Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 TILT/TELESCOPING STEERING COLUMN To unlock the steering column, push the lever downward (toward the floor). To tilt the steering column, move the This feature allows you to tilt the steering column steering wheel upward or downward as desired. To upward or downward.
Page 230: Heated Steering Wheel - If Equipped
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HEATED STEERING WHEEL — IF EQUIPPED Press the switch to turn on the heated steering wheel. The light on the switch The steering wheel contains a heating element that helps will illuminate to indicate the steering warm your hands in cold weather.
Page 231: Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 and clutch pedals (if equipped) to move toward or away WARNING! from the driver to provide improved position with the • Persons who are unable to feel pain to the skin steering wheel. because of advanced age, chronic illness, diabetes, The switch is located on the left side of the steering spinal cord injury, medication, alcohol use, exhaus-...
Page 232 230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Further small adjustments may be necessary to find Press the switch forward to move the pedals forward (toward the front of the vehicle). the best possible seat/pedal position. • For vehicles equipped with Driver Memory Seat, you Press the switch rearward to move the pedals rearward (toward the driver).
Page 233: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 WARNING! Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h).
Page 234: To Activate
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
Page 235: To Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 To Deactivate The speed denomination shown is dependant on the speed of English or Metric: A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the English Speed (mph) vehicle will deactivate the Electronic Speed Control with- •...
Page 236: To Accelerate For Passing
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pressed, the set speed will To Decrease Speed continue to decrease until the button is released, then When the Electronic Speed Control is set, you can de- the new set speed will be established.
Page 237: Parksense® Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 ParkSense® will retain the last system state (enabled or WARNING! disabled) from the last ignition cycle when the ignition is changed to the ON/RUN position. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
Page 238: Parksense® Warning Display
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® Warning Display The ParkSense® Warning screen will only be displayed if Sound and Display is selected from the Customer- Programmable Features section of the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)”...
Page 239: Parksense® Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 ParkSense® Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. Park Assist System OFF Park Assist System ON...
Page 240 238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Page 241 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Continuous Tone...
Page 242: Enabling/Disabling Parksense
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Distance Greater than 79-39 in 39-25 in 25-12 in Less than (in/cm) 79 in (200 cm) (200-100 cm) (100-65 cm) (65-30 cm) 12 in (30 cm) Audible Alert None Single 1/2 Slow Fast Continuous...
Page 243: Service The Parksense® Rear Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 shift lever is moved to REVERSE and the system is If “SERVICE PARK ASSIST SYSTEM” appears in the disabled, the EVIC will display the “PARK ASSIST SYS- Electronic Vehicle Information Center (EVIC) after mak- TEM OFF”...
Page 244 242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you turn ParkSense® OFF, the instrument clus- obstacle behind the fascia/bumper, or it could provide ter will display “PARK ASSIST SYSTEM OFF.” Fur- a false indication that an obstacle is behind the fascia/ thermore, once you turn ParkSense®...
Page 245 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 CAUTION! WARNING! • ParkSense® is only a parking aid and it is unable to • Drivers must be careful when backing up even recognize every obstacle, including small obstacles. when using ParkSense®. Always check carefully Parking curbs might be temporarily detected or not behind your vehicle, look behind you, and be sure detected at all.
Page 246: Parkview® Rear Back Up Camera - If Equipped
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the shift lever is put into REVERSE. The image will be WARNING! (Continued) displayed on the Navigation/Multimedia radio display • Before using ParkSense®, it is strongly recom- screen along with a caution note to “check entire sur- mended that the ball mount and hitch ball assem- roundings”...
Page 247 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 Zone Distance to the rear of the vehicle 0 - 1 ft (0 - 30 cm) Yellow 1 ft - 3 ft (30 cm - 1 m) Green 3 ft or greater (1 m or greater) WARNING! CAUTION! •...
Page 248: Turning Parkview® On Or Off - With Navigation/Multimedia Radio
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If snow, ice, mud, or any foreign substance 3. Enable or disable the rear camera feature by selecting builds up on the camera lens, clean the lens, rinse with “enable rear camera in reverse” soft-key. water, and dry with a soft cloth.
Page 249: Courtesy/Interior Lighting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 Courtesy/Interior Lighting At the forward end of the console are two courtesy lights (standard dome light has two buttons). The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.
Page 250: Sunglass Storage (Non-Sunroof Only)
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunglass Storage (Non-Sunroof Only) The door will slowly rotate to the full open position. At the front of the overhead console, a compartment is provided for the storage of two pairs of sunglasses. From the closed position, press the door latch to open the compartment.
Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 From this position, the door can be fully closed or, by NOTE: From the “conversation mirror” position, the rotating upward about 3/4 of the way and releasing, door can only be closed. positioned for conversation mirror use. To return to the full open position, the door must first be closed and then opened by pressing the latch again to release.
Page 252: Rear Courtesy/Reading Lights - If Equipped
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.
Page 253: Garage Door Opener - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 Rear Console Halo Lighting The rear overhead console has recessed halo lighting around the perimeter of the console base. This feature provides additional lighting options while traveling and is controlled by the headlight switch. Refer to “Lights/ Halo Lights —...
Page 254 252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink® buttons, located on either the overhead console, headliner or sunvisor, designate the three differ- ent HomeLink® channels. The HomeLink® indicator is located above the center button. HomeLink® Buttons/Sunvisor/Headliner NOTE: HomeLink® is disabled when the Vehicle Secu- rity Alarm is active.
Page 255: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Before You Begin Programming HomeLink® NOTE: • Erasing all channels should only be performed when Be sure that your vehicle is parked outside of the garage before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 256: Programming A Rolling Code
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming A Rolling Code For programming garage door openers that were manu- factured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener.
Page 257 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) Firmly press and release the “LEARN” or “TRAIN- away from the HomeLink® button you wish to pro- ING” button. On some garage door openers/devices gram while keeping the HomeLink®...
Page 258: Programming A Non-Rolling Code
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink® Button 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pro- To reprogram a channel that has been previously trained, gram while keeping the HomeLink®...
Page 259: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 • To program the two remaining HomeLink® buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
Page 260 258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) 5. Press and hold the programmed HomeLink® button away from the HomeLink® button you wish to pro- and observe the indicator light. gram while keeping the HomeLink®...
Page 261: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 Reprogramming A Single HomeLink® Button Security To reprogram a channel that has been previously trained, It is advised to erase all channels before you sell or turn follow these steps: in your vehicle. To do this, press and hold the two outside buttons for 20 1.
Page 262 260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Did you unplug the device for programming and WARNING! remember to plug it back in? Your motorized door or gate will open and close If you have any problems, or require assistance, please while you are programming the universal trans- call toll-free 1-800-355-3515 or, on the Internet at ceiver.
Page 263: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following visors on the overhead console.
Page 264: Opening Sunroof - Express
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express WARNING! Press the switch rearward and release it within one-half • Never leave children alone in a vehicle, or with second. The sunroof and sunshade will open automati- access to an unlocked vehicle. Never leave the key cally from any position.
Page 265: Closing Sunroof - Manual Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 position. The sunroof will close fully and stop automati- NOTE: If three consecutive sunroof close attempts result cally. This is called “Express Close”. During Express in Pinch Protect reversals, the fourth close attempt will be Close operation, any movement of the switch will stop a Manual Close movement with Pinch Protect disabled.
Page 266: Wind Buffeting
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Wind Buffeting Ignition Off Operation Wind buffeting can be described as the perception of For Vehicles Not Equipped With The Electronic Vehicle pressure on the ears or a helicopter-type sound in the Information Center (EVIC) ears.
Page 267 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 directly to the battery. The driver-side power outlet will CAUTION! also operate a conventional cigar lighter unit (if equipped • Do not exceed the maximum power of 160 Watts (13 with an optional Smoker’s Package). Amps) at 12 Volts.
Page 268 266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE One outlet in the removable floor console (if equipped) On vehicles equipped with the Super Console the power shares a fuse with the lower outlet in the instrument outlets are located under the retractable cover. To access panel and is also connected to the battery.
Page 269 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 The outlet in the rear quarter panel near the liftgate and the upper outlet in the instrument panel are both con- trolled by the ignition switch. Each of these outlets can support 160 Watts (13 Amps). Do not exceed 160 Watts (13 Amps) for each of these outlets.
Page 270 268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
Page 271: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 CAUTION! (Continued) • Power outlets are designed for accessory plugs only. Do not hang any type of accessory or acces- sory bracket from the plug. Improper use of the power outlet can cause damage. POWER INVERTER —...
Page 272: Cupholders
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This outlet can power cellular phones, electronics and WARNING! other low power devices requiring power up to 150 Watts. Certain high-end video games, such as Playsta- To avoid serious injury or death: • Do not insert any objects into the receptacles. tion3 and XBox360 will exceed this power limit, as will •...
Page 273: Instrument Panel Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 Instrument Panel Cupholders variety of container types and sizes. Press down on the container to engage the cupholder retention features. The instrument panel cupholders are located in a pull-out drawer just above the lower storage bin. Super Console —...
Page 274: Premium Console Cupholders - If Equipped
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For rear passengers two cupholders are located in the Premium Console Cupholders — If Equipped pull-out drawer, located in the back of the Super Console. On models equipped with premium center consoles, Pull the drawer out to the first position to use the there are four cupholders located on the top of the cupholders.
Page 275: Interior Bottle Holders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 Interior Bottle Holders There are four bottle holders located in the interior. One bottle holder is molded into each front interior door trim panels, and one bottle holder is molded into each side sliding interior door trim panel.
Page 276: Smoker's Package Kit - If Equipped
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Smoker’s Package Kit — If Equipped With the optional authorized dealer-installed Smoker’s Package Kit, a removable ash receiver is inserted into one of the two cupholders in the center front instrument panel. To install the ash receiver, align the receiver so the thumb grip on the lid is facing rearward.
Page 277 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Upper Compartment Lower Compartment To close the compartment door, push downward on the NOTE: The lower compartment is equipped with a lock door’s surface to latch the door closed. that is part of the compartment handle. Lower Glove Compartment To open the lower compartment pull out on the release handle.
Page 278: Door Trim Panel Storage
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Door Trim Panel Storage Front Door Storage Both interior front door panels have multiple pockets for storage. Driver Seatback Storage — If Equipped The driver’s seatback has a primary storage pocket on all models and an optional secondary mesh pocket.
Page 279: Umbrella Holder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 Umbrella Holder Second Row Seat Storage Bins — If Equipped An umbrella holder has been conveniently molded into The seat storage bins are located on the floor in front of the left front door entry scuff molding. the second row seats.
Page 280 278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull up on the storage bin latch to open the cover. Slide CAUTION! the storage bin locking mechanism to the Lock position to allow greater access to the storage bin. NOTE: The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.
Page 281: Storage Bin Safety Warning
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 Storage Bin Safety Warning WARNING! (Continued) Carefully follow these warnings to help prevent personal • Do not drive the vehicle with the storage bin covers injury or damage to your vehicle: open. Keep the storage bin covers closed and latched while the vehicle is in motion.
Page 282: Coat Hooks
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Seat Storage Bin Cover Emergency Release Lever NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from As a security measure, the Seat Storage Bin Cover has an inside of the bin by pushing on the glow-in-the-dark Emergency Release Lever built into the latching mecha- lever attached to the storage bin cover latching mecha-...
Page 283: Console Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 CONSOLE FEATURES There are three consoles available: Basic, Premium and Super. WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
Page 284 282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The cupholders are removable to access a large storage 3. Align the console until the front anchor cup plug hole bin. is centered on the winch hole. • The basic console is removable from the vehicle for 4.
Page 285: Premium Console - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 • 12 Volt DC power outlet provides continuous power Premium Console — If Equipped inside the console for cell phones or other electronics The three-compartment console with sliding storage bin, • Rear occupant accessible sliding upper tray with storage and large console storage bin offers multiple configurations.
Page 286 284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Position 1 shows the console closed with four cupholders and a convenient storage tray. Console Position 2 Dual Storage Bins Console Position 1 Position 3 shows the top portion of the console in a Position 2 shows the raised storage tray revealing a large rearward position.
Page 287 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 Console Position 3 Console Position 4 Position 4 shows the complete console in its rearmost To Remove The Premium Floor Console position. Again, lifting second latch handle at the front of 1. Pull up on the bottom release handle in the front of the the console, allows complete access to a lower storage bin console.
Page 288: Super Console - If Equipped
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull rearward to disengage from floor and remove WARNING! console. In an accident, serious injury could result if the To Reinstall The Premium Floor Console: removable floor console is not properly installed. 1.
Page 289 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 Front Lower Pass Through Super Console The super console tambour doors are opened by pushing 1 — Front Sliding Tambour Door down on the finger tabs and sliding the door. The front 2 — Cupholder Light Ring tambour door slides forward, the rear tambour door 3 —...
Page 290: Cargo Area Features
288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The front cupholder light ring and pass through CARGO AREA FEATURES lighting is controlled by a dimming switch located on the Rechargeable Flashlight instrument panel, refer to “Lights” in “Understanding The rechargeable flashlight is mounted on the right side The Features Of Your Vehicle”...
Page 291 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 Press And Release Three-Press Switch To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off.
Page 292: Rear Window Features
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to the heating elements: The rear window defroster button is located on • Use care when washing the inside of the rear the climate control (Mode) knob.
Page 293: Roof Luggage Rack - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 LOAD LEVELING SYSTEM — IF EQUIPPED does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo inside the vehicle The automatic load leveling system will provide a level- plus that on the external rack does not exceed the riding vehicle under most passenger and cargo loading maximum vehicle load capacity.
Page 294: Deploying The Crossbars
292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The crossbars and side rails are designed to carry weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. NOTE: •...
Page 295 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 Bend the crossbar supports at each end, taking care to keep hand clear of pivoting joint. Slide the thumb screw down. Deployed Position Then, position the crossbars across the roof. Stowed Position...
Page 296 294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The crossbars are identical and can be placed in any two of the three deploy positions. Crossbar To Side Rail Installation Once the crossbars are set into position, tighten the thumb screws completely. Deploy Positions –...
Page 297 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 NOTE: Load should always be secured to crossbars first, with rail tie down loops used as additional securing points if needed. Tie loops are intended as supplemen- tary tie down points only. Do not use ratcheting mecha- nisms with the tie loops.
Page 298 296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! (Continued) • Long loads which extend over the windshield, such • Check deployed crossbars frequently and retighten as wood panels or surfboards, or loads with large thumb screws as necessary. frontal area should be secured to both the front and •...
Page 299: Sun Screens - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 297 WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack.
Page 300 298 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gently pull up on the tab to raise the sun screen. To lower the sun screen, gently lift the tab upward to Continue pulling the sun screen until the tab is near the disengage the hooks, and feed the screen back into the top of the window.
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ EVIC Red Telltale Lights ....326 INSTRUMENT PANEL FEATURES ..303 ▫ Oil Change Required ....329 INSTRUMENT CLUSTER —...
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Customer-Programmable Features Uconnect® 130 WITH SATELLITE RADIO ..352 (System Setup) ..... . .336 ▫...
Page 303 UNDERSTANDING YOUR INSTRUMENT PANEL 301 ▫ Using This Feature.....371 ▫ Dual Video Screen .....382 ▫...
Page 304 302 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Replacing The Remote Control Batteries..399 CLIMATE CONTROLS ....425 ▫ Headphones Operation ....400 ▫...
Page 305: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 303 INSTRUMENT PANEL FEATURES 1 — Air Vents 5 — Upper Glove Compartment 9 — Storage Bin 13 — Hood Release 2 — Instrument Cluster 6 — Lower Glove Compartment 10 — Cup Holders 14 — Dimmer Switch 3 —...
Page 306: Instrument Cluster - Base
304 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — BASE...
Page 307: Instrument Cluster - Premium
UNDERSTANDING YOUR INSTRUMENT PANEL 305 INSTRUMENT CLUSTER — PREMIUM...
Page 308: Instrument Cluster Descriptions
306 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 4. Turn Signal Indicators 1. Tachometer The arrow will flash with the exterior turn signal when the turn signal lever is operated. This gauge measures engine revolutions per minute (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 6. Odometer Display/Electronic Vehicle Information This also displays Trip A and Trip B, DTE, MPG or Center (EVIC) Display — If Equipped L/100km, OAT (Outside Air Temperature) information to Base Cluster, use STEP and RESET button (on steering Odometer Display / Trip Odometer Display The odom- wheel) to access or reset the display.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Some of the above warnings will be displayed in noFUSE the Electronic Vehicle Information Center Display Area If the vehicle diagnostic system determines that the located in the instrument cluster. Ignition Off Draw (IOD) fuse is improperly installed, or Refer to ”Electronic Vehicle Information Center (EVIC) damaged, a “noFUSE”...
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 position. To turn off the message temporarily, press and instrument cluster. For further information, refer to release the STEP button on the steering wheel. To reset “Electronic Vehicle Information Center (EVIC)”. the oil change indicator system (after performing the 7.
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL 8. Tire Pressure Monitoring Telltale Light — If Equipped overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Each tire, including the spare (if provided), Please note that the TPMS is not a substitute for proper should be checked monthly when cold and tire maintenance, and it is the driver’s responsibility to...
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 of reasons, including the installation of replacement or 9. Malfunction Indicator Light (MIL) alternate tires or wheels on the vehicle that prevent the The Malfunction Indicator Light (MIL) is part of TPMS from functioning properly. Always check the an Onboard Diagnostic system, called OBD, that TPMS malfunction telltale after replacing one or more monitors engine and automatic transmission con-...
Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Electronic Stability Control (ESC) Activation/ CAUTION! Malfunction Indicator Light — If Equipped Prolonged driving with the Malfunction Indicator The “ESC Activation/Malfunction Indicator Light (MIL) on could cause damage to the engine Light” in the instrument cluster will come on control system.
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 NOTE: 12. Speedometer • The “ESC Off Indicator Light” and the “ESC Indicates vehicle speed. Activation/Malfunction Indicator Light” come on 13. Fuel Door Reminder momentarily each time the ignition switch is turned to ON/RUN. The arrow in this symbol is a reminder that the Fuel Filler Door is located on the left side of the •...
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL dealer as soon as possible. Refer to “Occupant Restraints” 17. Vehicle Security Light — If Equipped in “Things To Know Before Starting Your Vehicle” for This light will flash at a fast rate for approxi- further information.
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 In this case, the light will remain on until the condition WARNING! has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake Driving a vehicle with the red brake light on is and a brake pedal pulsation may be felt during each stop.
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL The light also will turn on when the parking brake is 20. Temperature Gauge applied with the ignition switch in the ON/RUN posi- The temperature gauge shows engine coolant tempera- tion. ture. Any reading within the normal range indicates that NOTE: This light shows only that the parking brake is the engine cooling system is operating satisfactorily.
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 briefly as a bulb check. If the light stays on or comes on WARNING! while driving, turn off some of the vehicle’s non-essential electrical devices or increase engine speed (if at idle). If A hot engine cooling system is dangerous. You or the charging system light remains on, it means that the others could be badly burned by steam or boiling vehicle is experiencing a problem with the charging...
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL 24. Engine Temperature Warning Light 25. Electronic Throttle Control (ETC) Light This light warns of an overheated engine condi- This light informs you of a problem with the tion. As engine coolant temperatures rise and the Electronic Throttle Control (ETC) system.
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 26. Transmission Temperature Warning Light CAUTION! During sustained high speed driving or trailer Continuous driving with the Transmission Tempera- towing up long grades on hot days, the auto- ture Warning Light illuminated will eventually cause matic transmission oil may become too hot.
Page 322: Electronic Vehicle Information Center (Evic) - If Equipped
320 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER This system conveniently allows the driver to select a (EVIC) — IF EQUIPPED variety of useful information by pressing the switches mounted on the steering wheel. The EVIC consists of the The Electronic Vehicle Information Center (EVIC) fea- following: tures a driver-interactive display that is located in the...
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 The system allows the driver to select information by UP Button pressing the following buttons mounted on the steering Press and release the UP button to scroll up- wheel: ward through the main menus (Fuel Economy, Vehicle Info, Tire PSI, Cruise, Messages, Units, System Setup) and sub-menus.
Page 324: Electronic Vehicle Information Center (Evic) Displays
322 UNDERSTANDING YOUR INSTRUMENT PANEL BACK Button The main display area will normally display the main menu or the screens of a selected feature of the main Press the BACK button to scroll back to a menu. The main display area also displays pop up previous menu or sub-menu.
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 • Unstored Messages When the appropriate conditions exist, the EVIC displays the following messages: This message type is displayed indefinitely or until the condition that activated the message is cleared. Examples Key in ignition of this message type are Turn Signal On (if a turn signal Ignition or Accessory On is left on) and Lights On (if driver leaves the vehicle).
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Not in Park Left Rear Turn Signal Light Out Press Brake Pedal and Push Button to Start Right Front Turn Signal Light Out Door(s) Ajar (with a single chime, if vehicle is in motion) Right Rear Turn Signal Light Out Liftgate Ajar (chime will sound when vehicle starts Park Assist Disabled...
Page 327: Evic White Telltale Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 325 • Electronic Speed Control Ready present, the BSM system will illuminate the icon only on the side of interference as long as interference is present. This light will turn on when the electronic Service Blind Spot System — This message is displayed speed control is ready.
Page 328: Evic Amber Telltale Lights
326 UNDERSTANDING YOUR INSTRUMENT PANEL • Windshield Washer Fluid Low Indicator EVIC Amber Telltale Lights This area will show reconfigurable amber caution tell- This light will turn on to indicate the wind- tales. These telltales include: shield washer fluid is low. •...
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 vehicle and shut off the engine as soon as possible. A If jump starting is required, refer to “Jump Starting chime will sound for four minutes when this light turns Procedures” in “What To Do In Emergencies”. •...
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL • Transmission Temperature Warning Light required. You may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may This light indicates that the transmission fluid require towing. temperature is running hot. This may occur •...
Page 331: Oil Change Required
UNDERSTANDING YOUR INSTRUMENT PANEL 329 Unless reset, this message will continue to display each WARNING! time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and If you continue operating the vehicle when the release the Menu button.
Page 332: Fuel Economy
330 UNDERSTANDING YOUR INSTRUMENT PANEL Fuel Economy Press and release the UP or DOWN button until “Fuel Economy” displays highlighted in the EVIC and press the SELECT button. The following Fuel Economy func- tions display in the EVIC: • Average Fuel Economy (AVG) •...
Page 333: Vehicle Speed
UNDERSTANDING YOUR INSTRUMENT PANEL 331 NOTE: Significant changes in driving style or vehicle SELECT button. Press the SELECT button to display the loading will greatly affect the actual drivable distance of current speed in mph or km/h. Pressing the SELECT the vehicle, regardless of the DTE displayed value.
Page 334: Tire Psi
332 UNDERSTANDING YOUR INSTRUMENT PANEL Trip B Tire PSI Shows the total distance traveled for Trip B since the last Press and release the UP or DOWN button until “Tire reset. PSI:” displays highlighted in the EVIC. Press the SELECT button to view a graphic of the vehicle with a tire Elapsed Time pressure value at each corner of the graphic.
Page 335: Vehicle Info (Customer Information Features)
UNDERSTANDING YOUR INSTRUMENT PANEL 333 Vehicle Info (Customer Information Features) Messages # Press and release the UP or DOWN button until “Vehicle Select from Main Menu using the UP or DOWN buttons. Info” displays in the EVIC and press the SELECT button. This feature shows the number of stored warning mes- Press the UP and DOWN button to scroll through the sages (in the # place holder).
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The system will display the last known outside Manual Compass Calibration temperature when starting the vehicle and may need to If the compass appears erratic and the CAL indicator be driven several minutes before the updated tempera- does not appear in the EVIC display, you must put the ture is displayed.
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 5. Complete one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between Magnetic North and Geographic North.
Page 338: Customer-Programmable Features
336 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the DOWN button until the “Compass Variance” press the SELECT button to enter the System Setup message is displayed in the EVIC, then press the sub-menu. Press and release the UP or DOWN button to SELECT button.
Page 339 UNDERSTANDING YOUR INSTRUMENT PANEL 337 the feature showing the system has been activated or the Auto Unlock Doors — If Equipped check-mark is removed showing the system has been When ON is selected, all doors will unlock when the deactivated. vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened.
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL appears next to the feature showing the system has been In warm weather, the driver vented seat feature will activated or the check-mark is removed showing the automatically turn on when the remote start is activated. system has been deactivated.
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 Horn with Remote Start Headlamp Off Delay When this feature is selected, a short horn sound will When this feature is selected, the driver can choose to occur when the RKE transmitter REMOTE START button have the headlights remain on for 0, 30, 60, or 90 seconds is pressed.
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL Headlamps with Wipers (Available with Auto the SELECT button until a check-mark appears next to Headlights Only) the feature showing the system has been activated or the check-mark is removed showing the system has been When ON is selected, and the headlight switch is in the deactivated.
Page 343 UNDERSTANDING YOUR INSTRUMENT PANEL 341 Illuminated Approach Easy Entry/Exit Seat — If Equipped When this feature is selected, the headlights will activate This feature provides automatic driver seat positioning to and remain on for up to 90 seconds when the doors are enhance driver mobility when entering and exiting the unlocked with the RKE transmitter.
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL To make your selection, press and release the SELECT To make your selection, press and release the SELECT button until a check-mark appears next to the feature button until a check-mark appears next to the feature showing the system has been activated or the check-mark showing the system has been activated or the check-mark is removed showing the system has been deactivated.
Page 345: If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 343 Uconnect® 730N/430/430N CD/DVD/HDD/NAV — Uconnect® 130 IF EQUIPPED Refer to your Uconnect® Supplement Manual for de- tailed operating instructions. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details. Operating Instructions (Uconnect® Phone) — If Equipped Refer to “Uconnect®...
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) another selection. Holding either button will bypass stations without stopping, until you release it. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second TIME Button time to turn off the radio.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 5. To exit, press any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL RW/FF control knob to the right or left to increase or decrease the Pressing the RW (Rewind) or FF (Fast Forward) buttons mid-range tones.
Page 348 346 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to display window. Each button can be set for SET 1 and exit setting tone, balance, and fade. SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory.
Page 349: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 347 Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button – Ejecting a CD the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. Press the EJECT button to eject the CD. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within...
Page 351: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 349 SET/RND Button (Random Play Button) Supported Media (Disc Types) Press this button while the CD is playing to activate The MP3 file recording media supported by the radio are Random Play. This feature plays the selections on the CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.
Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL display the file name and folder name, and will assign Supported MP3 File Formats a number instead. With a maximum number of files, The radio will recognize only files with the *.MP3 exten- exceeding 20 folders will result in this display. With sion as MP3 files.
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 Playback of MP3 Files MPEG Sampling Fre- Bit Rate (kbps) Specification quency (kHz) When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium MPEG-1 Audio 48, 44.1, 32 320, 256, 224, contains a lot of folders or files, the radio will take more Layer 3...
Page 354: Operation Instructions - Auxiliary Mode
352 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — Auxiliary Mode Uconnect® 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or iPod®, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 Power Switch/Volume Control (Rotary) another selection. Holding either button will bypass stations without stopping, until you release it. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second Voice Command System (Radio) —...
Page 356 354 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button Uconnect® Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes Press this button to operate the Uconnect® Phone feature will begin to blink.
Page 357 UNDERSTANDING YOUR INSTRUMENT PANEL 355 INFO Button Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL Press the INFO button for an RDS station (one with call control knob to the right or left to increase or decrease the letters displayed).
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to Program Type 16-Digit Character Display exit setting tone, balance, and fade. Classic Rock Cls Rock MUSIC TYPE Button College College Pressing this button once will turn on the Music Type Country Country mode for five seconds.
Page 359 UNDERSTANDING YOUR INSTRUMENT PANEL 357 SETUP Button Program Type 16-Digit Character Display Pressing the SETUP button allows you to select between Soft Soft the following items: Soft Rock Soft Rck • Set Clock — Pressing the SELECT button will allow Soft Rhythm and Blues Soft R&B you to set the clock.
Page 360: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
358 UNDERSTANDING YOUR INSTRUMENT PANEL button. The symbol SET 1 will now show in the display Buttons 1 - 6 window. Select the button (1–6) you wish to lock onto this These buttons tune the radio to the stations that you station and press and release that button.
Page 361 UNDERSTANDING YOUR INSTRUMENT PANEL 359 Inserting Compact Disc(s) CAUTION! (Continued) Gently insert one CD into the CD player with the CD • Do not use adhesive labels. These labels can peel label facing up. The CD will automatically be pulled into away and jam the player mechanism.
Page 362 360 UNDERSTANDING YOUR INSTRUMENT PANEL A disc can be ejected with the radio and ignition OFF. RW/FF Press and hold FF (Fast Forward) and the CD player will NOTE: Ejecting with the ignition OFF is not allowed on begin to fast forward until FF is released or RW or convertible or soft-top models (if equipped).
Page 363: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 361 Notes On Playing MP3 Files The radio uses the following limits for file systems: • Maximum number of folder levels: 8 The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When •...
Page 364 362 UNDERSTANDING YOUR INSTRUMENT PANEL Multisession disc formats are supported by the radio. use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or Multisession discs may contain combinations of normal VBR bit rates. CD audio tracks and computer files (including MP3 files). MPEG Sampling Fre- Discs created with an option such as keep disc open after...
Page 365: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 363 Playback of MP3 Files LIST Button (CD Mode for MP3 Play) When a medium containing MP3 data is loaded, the Pressing the LIST button will bring up a list of all folders radio checks all files on the medium. If the medium on the disc.
Page 366: Uconnect® (Satellite Radio) - If Equipped
364 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds TIME Button (Auxiliary Mode) to return to elapsed time display. Press this button to change the display to time of day. The time of day will display for five seconds (when the Operation Instructions –...
Page 367 UNDERSTANDING YOUR INSTRUMENT PANEL 365 System Activation To access the ESN/SID, refer to the following steps: Sirius Satellite Radio service is pre-activated, and you ESN/SID Access may begin listening immediately to the one year of audio With the ignition switch in the ON/RUN or ACC posi- service that is included with the factory-installed satellite tion and the radio on, press the SETUP button and scroll radio system in your vehicle.
Page 368 366 UNDERSTANDING YOUR INSTRUMENT PANEL decreased performance. Larger luggage items such as Operating Instructions – Uconnect® (Satellite) bikes should be placed as far rearward as possible, within Mode the loading design of the rack. Do not place items directly NOTE: The ignition switch must be in the ON/RUN or on or above the antenna.
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 INFO Button MUSIC TYPE Button Pressing the INFO button will cycle the display informa- Pressing this button once will turn on the Music Type tion between Artist, Song Title, and Composer (if avail- mode for five seconds. Pressing the MUSIC TYPE button able).
Page 370: Operating Instructions (Uconnect® Phone) - If Equipped
368 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press Pressing the SETUP button allows you to select the the SET button twice and SET 2 will show in the display following items: window.
Page 371: Ipod®/Usb/Mp3 Control
UNDERSTANDING YOUR INSTRUMENT PANEL 369 iPod®/USB/MP3 CONTROL — IF EQUIPPED NOTE: • If the radio has a USB port, refer to the appropriate NOTE: This section is for Uconnect® 130/230 radios only. For Uconnect® 430/430N, 730N, 731N, 735N or 431 Uconnect®...
Page 372: Connecting The Ipod® Or External Usb Device
370 UNDERSTANDING YOUR INSTRUMENT PANEL Connecting The iPod® Or External USB Device NOTE: The glove compartment will have a position where the iPod® or consumer electronic audio device Use the connection cable to connect an iPod® or external cable can be routed through without damaging the cable USB device to the vehicle’s USB connector port which is when closing the lid.
Page 373: Using This Feature
UNDERSTANDING YOUR INSTRUMENT PANEL 371 Using This Feature MP3 control mode, audio tracks (if available from audio device) start playing over the vehicle’s audio system. By using an iPod® cable, or an external USB device to connect to the USB port: Play Mode •...
Page 374 372 UNDERSTANDING YOUR INSTRUMENT PANEL • Jump backward in the current track by pressing and to the next screen of data for that track. Once all holding the << RW button. Holding the << RW button screens have been viewed, the last INFO button press long enough will jump to the beginning of the current will go back to the play mode screen on the radio.
Page 375: List Or Browse Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 373 device, or press the VR button and say Shuffle ON or through the list faster. During fast scroll, a slight delay Shuffle Off. If the RND icon is showing on the radio in updating the information on the radio display may display, then the shuffle mode is ON.
Page 376 374 UNDERSTANDING YOUR INSTRUMENT PANEL • Preset 6 – Podcasts CAUTION! • Pressing a PRESET button will display the current list • Leaving the iPod® or external USB device (or any on the top line and the first item in that list on the supported device) anywhere in the vehicle in ex- second line.
Page 377: Bluetooth® Streaming Audio (Btsa)
UNDERSTANDING YOUR INSTRUMENT PANEL 375 Bluetooth® Streaming Audio (BTSA) Selecting A Different Audio Device Music can be streamed from your cellular phone to the 1. Press the PHONE button to begin. Uconnect® phone system. 2. After the Ready prompt and following the beep, say Controlling BTSA Using Radio Buttons Setup , then say Select Audio Devices.
Page 378: Uconnect® Multimedia - Video
376 UNDERSTANDING YOUR INSTRUMENT PANEL Browse Getting Started • Screen(s) located in the overhead console: Unfold the Browsing is not available on a Bluetooth® Streaming Audio (BTSA) device. Only the current song that is overhead LCD screen(s) by pushing the button on the playing will display info.
Page 379: Blu-Ray™ Player
UNDERSTANDING YOUR INSTRUMENT PANEL 377 • Your vehicle may be equipped with either a standard • For Dual Video Screen System, Channel 1 on the DVD player or a Blu-ray Disc™ Player. If equipped Remote Control and Headphones refers to Screen 1 with a Blu-ray Disc™...
Page 380: Play Video Games
378 UNDERSTANDING YOUR INSTRUMENT PANEL does not begin automatically after the disc is inserted into Using the Remote Control Blu-ray VES™ disc Player follow these steps: • Select an audio channel (Channel 1 for 2nd row screen Using the Touchscreen Radio and Channel 2 for 3rd row screen), then press the source key and select VES™...
Page 381 UNDERSTANDING YOUR INSTRUMENT PANEL 379 When connecting an external source to the AUX input, be sure to follow the standard color coding for the VES™ jacks: NOTE: Certain high-end video games, such as Playsta- tion3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter.
Page 382 380 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control Using The Touchscreen Radio Controls 1. Press the MODE button on the Remote Control. 1. Press the MENU hard-key on the radio faceplate. 2. While looking at the video screen, highlight VES™ 2.
Page 383: Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1
UNDERSTANDING YOUR INSTRUMENT PANEL 381 3. Touch the 1 soft-key and then touch either AUX 1 or Listen To An Audio Source On Channel 2 While A AUX 2 in the VES™ column (depending which AUX Video Is Playing On Channel 1 input is used).
Page 384: Dual Video Screen
382 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Touchscreen Radio Controls Play A DVD Using The Touchscreen Radio 1. Press the MENU hard-key on the radio faceplate. NOTE: Headunit DVD player does not play Blu-Ray Discs™. 2. Touch the Rear VES soft-key to display the Rear VES Controls.
Page 385 UNDERSTANDING YOUR INSTRUMENT PANEL 383 Using The Remote Control NOTE: • Channel/Screen 1 select mode information is shown 1. Press the SOURCE button on the Remote Control. on the left side of the screen. 2. While looking at Screen 1 or 2, highlight DISC by •...
Page 386 384 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Touchscreen Radio Controls 3. Touch the 1 or 2 soft-key and then the DISC soft-key in the MEDIA column. To exit touch the back arrow at 1. Press the MENU hard-key on the radio faceplate. the top left of the screen.
Page 387: Play A Dvd Using The Ves™ Player - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 385 Play A DVD Using The VES™ Player — If 2. While looking at Screen 1 or 2, highlight VES™ DISC Equipped by either pressing Up/Down/Left/Right buttons or by repeatedly pressing the SOURCE button, then press 1.
Page 388 386 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mode information is shown on the right side of the screen. • The VES™ will retain the last setting when turned off. Using The Touchscreen Radio Controls 1.
Page 389: Play A Blu-Ray Disc™ Using The Blu-Ray™ Player - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 387 • Viewing a DVD on the Touchscreen radio screen is not available in all states/provinces. If available, the ve- hicle must be stopped and the shift lever must be in the PARK position for vehicles with an automatic trans- mission.
Page 390 388 UNDERSTANDING YOUR INSTRUMENT PANEL 3. To watch a Blu-ray Disc™ on Screen 2 for third row Using The Touchscreen Radio Controls passengers, ensure the Remote Control and Head- 1. Press the MENU hard-key on the radio faceplate. phone switch is on Channel 2. 2.
Page 391: Listen To An Audio Source While A Video Is Playing
UNDERSTANDING YOUR INSTRUMENT PANEL 389 NOTE: Listen To An Audio Source While A Video Is Playing • To view a Blu-ray Disc™ on the radio press the Ensure the Remote Control and Headphone switch are on RADIO/MEDIA hard-key, on the radio faceplate, then the same channel.
Page 392 390 UNDERSTANDING YOUR INSTRUMENT PANEL 2. While looking at the video screen, either press Up/ Using The Touchscreen Radio Controls Down/Left/Right on the Remote Control to highlight 1. Press the MENU hard-key on the radio faceplate. the desired audio source or repeatedly press the SOURCE button on the remote until the desired audio 2.
Page 393: Important Notes For Dual Video Screen System
UNDERSTANDING YOUR INSTRUMENT PANEL 391 3. To listen to an audio source on Channel 2 while a Important Notes For Dual Video Screen System video is playing on Channel 1, touch the 2 soft-key and • VES™ is able to transmit two channels of stereo audio choose an audio source.
Page 394: Ves™ Remote Control - If Equipped
392 UNDERSTANDING YOUR INSTRUMENT PANEL • The 2nd row screen and 3rd row screen of the Video VES™ Remote Control — If Equipped Entertainment System can play two separate discs by utilizing the touch-screen radio DVD player and Blu- ray Disc Player. •...
Page 395 UNDERSTANDING YOUR INSTRUMENT PANEL 393 Controls And Indicators switch is in the Channel 2, position the remote controls the functionality of headphone Channel 2 (right side 1. Power – Turns the screen and wireless headphone of the screen). transmitter for the selected Channel on or off. To hear audio while the screen is closed, press the Power –...
Page 396 394 UNDERSTANDING YOUR INSTRUMENT PANEL 9. ▪ (Stop) – Stops disc play. 14. MODE/SOURCE – Press to change the mode of the selected channel. See the Mode Selection section of 10. PROG Up/Down / Rewind/skip back and fast fwd/ this manual for details on changing modes. skip forward –...
Page 397: Blu-Ray™ Player Remote Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 395 – In radio modes, press to seek to the previous Blu-ray™ Player Remote Control — If Equipped tunable station. In disc modes, press and hold to fast rewind through the current audio track or video chapter.
Page 398 396 UNDERSTANDING YOUR INSTRUMENT PANEL Controls And Indicators – Press to navigate menus. 1. Power – Turns the screen and wireless headphone 6. SETUP – Press to access the Blu-ray™ Setup menu transmitter for the selected Channel on or off. To hear screen.
Page 399 UNDERSTANDING YOUR INSTRUMENT PANEL 397 10. POPUP/MENU – Press to access the Blu-ray™ main 14. MUTE – Mutes headphone audio. menu when in Blu-ray™ or DVD mode. Press to start 15. BACK – Press to exit out of menus or return to source Scan or start Random track functions in CD or HDD selection screen.
Page 400: Remote Control Storage
398 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Control Storage The video screen(s) come with a built in storage compart- ment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be very difficult to remove.
Page 401: Locking The Remote Control
UNDERSTANDING YOUR INSTRUMENT PANEL 399 Locking The Remote Control Replacing The Remote Control Batteries All remote control functionality can be disabled as a The remote control requires two AAA batteries for op- parental control feature. eration. To replace the batteries: •...
Page 402: Headphones Operation
400 UNDERSTANDING YOUR INSTRUMENT PANEL Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves.
Page 403: Blu-Ray™ Headphones Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 401 Blu-ray™ Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves.
Page 404: Controls
402 UNDERSTANDING YOUR INSTRUMENT PANEL Controls NOTE: • When both switches are on Channel 1, the Remote is The headphone power indicator and controls are located controlling Channel 1 and the headphones are tuned on the right ear cup. to the audio of the VES™ Channel 1. NOTE: The rear video system must be turned on before •...
Page 405: Replacing The Headphone Batteries
UNDERSTANDING YOUR INSTRUMENT PANEL 403 4. When the Mode Selection menu appears on screen, Unwired® Stereo Headphone Lifetime Limited use the cursor buttons on the remote control to navi- Warranty gate to the available modes and press the OK button to Who Does This Warranty Cover? This warranty covers select the new mode.
Page 406 404 UNDERSTANDING YOUR INSTRUMENT PANEL TECHNOLOGY IS NOT LIABLE FOR ANY INJURIES What Will Unwired® Do? Unwired®, at its option, will OR DAMAGES TO PERSONS OR PROPERTY RESULT- repair or replace any defective Product. Unwired® re- ING FROM THE USE OF, OR ANY FAILURE OR DE- serves the right to replace any discontinued Product with FECT IN, THE PRODUCT, NOR IS UNWIRED LIABLE a comparable model.
Page 407: System Information
UNDERSTANDING YOUR INSTRUMENT PANEL 405 System Information The VES™ has the ability to switch tuner (AM/FM), SEEK, SCAN, TUNE, and recall presets in radio modes as Shared Modes long as it is not in shared mode. This allows the VES™ to output radio sources to the When in shared disc mode both the radio and the VES™...
Page 408 406 UNDERSTANDING YOUR INSTRUMENT PANEL Information Mode Display 1. Channel 1 Mode 2. Channel 1 Shared Status 3. Channel 1 Audio Only/Mute 4. Channel 2 Mode 5. Channel 2 Shared Status 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER/OK Button Action 8.
Page 409 UNDERSTANDING YOUR INSTRUMENT PANEL 407 Numeric Keypad Menu When the display for either Channel 1 or Channel 2 shows DIRECT TUNE, pressing the remote control’s OK button activates a numeric keypad menu. This screen makes it easy to enter a specific tuner frequency, satellite channel, or track number.
Page 410 408 UNDERSTANDING YOUR INSTRUMENT PANEL Station List Menu Disc Menu When listening to Satellite audio, pressing the remote control’s POP UP/MENU button displays a list of all available channels. Navigate this list using the remote control’s navigation buttons ( , ) to find the desired station, press the remote control’s ENTER/OK button to tune to that station.
Page 411 UNDERSTANDING YOUR INSTRUMENT PANEL 409 Display Settings Listening To Audio With The Screen Closed When watching a video source (DVD Video with the disc To listen to only audio portion of the channel with the in Play mode, Aux Video, etc.), pressing the remote screen closed: control’s SETUP button activates the Display Settings •...
Page 412 410 UNDERSTANDING YOUR INSTRUMENT PANEL • CD: CD-DA, VCD, CD-TEXT Disc Formats • DVD/CD: MP3, WMA, AAC, DivX (versions 3 – 6) The DVD player is capable of playing the following types of discs (12 cm or 8 cm diameter): profile 3.0 •...
Page 413 UNDERSTANDING YOUR INSTRUMENT PANEL 411 • Any file that is copy protected will not play. The • To change the current chapter, use the remote control’s Blu-Ray™ Player will automatically skip the file and or Blu-Ray™ Player’s “Fast Forward” button to ad- begin playing the next available file.
Page 414 412 UNDERSTANDING YOUR INSTRUMENT PANEL • Open sessions are ignored. Only sessions that are which may result in a lowered apparent volume level. If you increase the volume level to account for this change closed are playable. in level, remember to lower the volume before changing •...
Page 415 UNDERSTANDING YOUR INSTRUMENT PANEL 413 • Mixed disc which contains DivX will be priority • The DVD player always uses the file extension to played on Blu-ray Disc™ Player . determine the audio format, so MP3 files must always end with the extension .mp3 or .MP3 and WMA If you are still having trouble writing a disc that is files must always end with the extension .wma or playable in the DVD player, check with the disc recording...
Page 416 414 UNDERSTANDING YOUR INSTRUMENT PANEL • Other compression formats such as AAC, MP3 Pro, Disc Errors Ogg Vorbis, and ATRAC3 will not play. The DVD If the DVD player is unable to read the disc, a Disc Error player will automatically skip the file and begin play- message is displayed on the Radio display and the disc is ing the next available file.
Page 417 UNDERSTANDING YOUR INSTRUMENT PANEL 415 The DVD player may shut down during extremely hot Display conditions, such as when the vehicle’s interior tempera- Other Language Setup ture is above 120° F (49° C). The Blu-ray™ Player may shut down when the vehicle’s interior temperature ex- ceeds 140°...
Page 418 416 UNDERSTANDING YOUR INSTRUMENT PANEL All of the Language settings have a special Other setting selecting the digit, press the remote control’s Right to accommodate languages other than Japanese or Eng- cursor button to select the next digit. Repeat this digit lish.
Page 419 UNDERSTANDING YOUR INSTRUMENT PANEL 417 Rating and Password Setup The default rating is Level 8 (play all discs without a password) and the default password is 0000. The Rating and Password settings work together to control the types of DVDs that your family watches. Most DVD- Video discs have a rating (from 1 to 8) assigned to them where lower numbers are designated for all audiences and higher numbers are designated for more adult audiences.
Page 420 418 UNDERSTANDING YOUR INSTRUMENT PANEL • After the four-digit password is entered, press the remote To set the password, activate the DVD Setup Menu and follow these additional instructions: control’s ENTER/OK button to accept the change. • Using the remote control Left and Right cursor but- tons, select the Rating tab.
Page 421 UNDERSTANDING YOUR INSTRUMENT PANEL 419 • Using the remote control’s Up and Down cursor To set the rating, activate the DVD Setup Menu and follow these additional instructions: buttons, select the new rating level, and then press the remote control’s ENTER/OK button to accept the •...
Page 422 420 UNDERSTANDING YOUR INSTRUMENT PANEL • THIS PRODUCT IS LICENSED UNDER THE VC-1 Code, you expressly assume all risk and liability associ- ated with downloading and using the Source Code and PATENT PORTFOLIO LICENSE FOR THE PER- complying with the user agreements that accompany SONAL AND NON-COMMERCIAL USE OF A CON- each Source Code.
Page 423 UNDERSTANDING YOUR INSTRUMENT PANEL 421 • This product incorporates copyright protection tech- film and videos and their soundtracks. When a prohib- ited use of an unauthorized copy is detected, a message nology that is protected by U.S. patents and other will be displayed and playback or copying will be intellectual property rights.
Page 424 422 UNDERSTANDING YOUR INSTRUMENT PANEL ABOUT DIVX VIDEO: DivX® is a digital video format Trademark created by DivX, LLC, a subsidiary of Rovi Corporation. • Blu-ray Disc™, Blu-ray™ and the logos are trademarks This is an official DivX Certified® device that plays DivX of the Blu-ray Disc Association.
Page 425: Steering Wheel Audio Controls - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 423 STEERING WHEEL AUDIO CONTROLS — IF The remote sound system controls are located on the rear EQUIPPED surface of the steering wheel, at the three and nine o’clock positions. The right-hand rocker switch has a pushbutton in the center, and controls the volume and mode of the sound system.
Page 426: Radio Operation
424 UNDERSTANDING YOUR INSTRUMENT PANEL Radio Operation CD/DVD/Blu-ray Disc™ MAINTENANCE Pressing the top of the switch will SEEK up for the next To keep a CD/DVD/Blu-ray Disc™ in good condition, listenable station, and pressing the bottom of the switch take the following precautions: will SEEK down for the next listenable station.
Page 427: Radio Operation And Mobile Phones
UNDERSTANDING YOUR INSTRUMENT PANEL 425 NOTE: If you experience difficulty in playing a particular CLIMATE CONTROLS disc, it may be damaged (i.e., scratched, reflective coating The Climate Control system allows you to regulate the removed, a hair, moisture or dew on the disc) oversized, temperature, amount, and direction of air circulating or have protection encoding.
Page 428 426 UNDERSTANDING YOUR INSTRUMENT PANEL The primary control for the rear blower is on the front climate control unit located on the instrument panel. When the front control is in any position other than rear, the front control operates all the rear functions. The rear airflow modes will mirror the front unit opera- tion.
Page 429 UNDERSTANDING YOUR INSTRUMENT PANEL 427 2. Rear Blower Control — If Equipped 4. Rear Temperature Control — If Equipped Use this control to regulate the amount of air forced Provides temperature control for the rear cabin. Turn left through the rear system in any mode you select. The rear for cooler or right for warmer temperature settings in the blower speed increases as you move the control to the rear cabin.
Page 430 428 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Front Defrost Mode NOTE: • You can turn off the heated mirror feature at anytime Air is directed through the windshield and side by pressing the rear window defroster switch a window demist outlets. Use Defrost mode with second time.
Page 431 UNDERSTANDING YOUR INSTRUMENT PANEL 429 NOTE: CAUTION! (Continued) • If the Recirculation button is pressed when the • Do not use scrapers, sharp instruments, or abrasive system is in Defrost mode the Recirculation LED window cleaners on the interior surface of the indicator will flash 3 times to indicate Recirculation window.
Page 432 430 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Air Conditioning (A/C) Button 12. Bi-Level Mode Button Press and release to change the current setting. Air is directed through the panel and floor outlets. The indicator illuminates when ON. NOTE: There is a difference in temperature (in any conditions other than full cold or full hot), between the upper and lower outlets for added comfort.
Page 433: Rear Manual Climate Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 431 Economy Mode The rear blower and temperature controls for the rear seat passengers are located in the headliner, near the If ECONOMY mode is desired, press the A/C button to center of the vehicle. turn off the indicator light and the A/C compressor. Rotate the temperature control knob to the desired tem- perature.
Page 434 432 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Blower Control CAUTION! The primary control for the rear blower is on the front Interior air enters the Rear Manual Climate Control climate control unit, located on the instrument panel. system through an intake grille, located in the right Only when the front control for the rear blower is in the side trim panel behind the third row seats.
Page 435: Automatic Temperature Control (Atc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 433 When rear controls are locked by the front system, the Floor Mode lock symbol on the temperature knob is illuminated, and Air comes from the floor outlets. the rear overhead adjustments are inoperable. Automatic Temperature Control (ATC) — If Rear Mode Control Equipped Headliner Mode...
Page 436 434 UNDERSTANDING YOUR INSTRUMENT PANEL The Three-Zone ATC system automatically maintains the 1. Air Conditioning (A/C) Button interior comfort level desired by the driver and all passen- Press and release to change the current Air Conditioning gers. The system automatically adjusts the air temperature, (A/C) setting, the indicator illuminates when A/C is ON.
Page 437 UNDERSTANDING YOUR INSTRUMENT PANEL 435 6. Auto Indicator 10. Rear Control Button This indicates when the system is in Auto mode. Provides toggle operation between front control screen and rear control screen. Push the button to activate the 7. Right Front Seat Occupant Temperature Display rear climate control screen and allow the front seat This display shows the temperature setting for the right occupants control over the rear climate settings.
Page 438 436 UNDERSTANDING YOUR INSTRUMENT PANEL 13. Climate Control OFF Button 17. SYNC Button Press and release to turn the Climate Control OFF. If the Press and release to control the temperature setting for all control is OFF, press any button to turn the control ON. three zones from the driver temperature control.
Page 439 UNDERSTANDING YOUR INSTRUMENT PANEL 437 Once the desired temperature is displayed, the system To provide you with maximum comfort in the automatic will achieve and automatically maintain that comfort mode, during cold start-ups, the blower fan will remain level. on low until the engine warms up. The fan will engage immediately if the Defrost mode is selected, or by chang- 3.
Page 440 438 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioning (A/C) Controlling The Rear Climate Controls From The Front ATC Panel The Air Conditioning (A/C) button allows the operator The Three-Zone ATC system allows for adjustment of the to manually activate or deactivate the air conditioning rear climate controls from the front ATC panel.
Page 441 UNDERSTANDING YOUR INSTRUMENT PANEL 439 3. Blower Control Display This display shows the current Blower speed selection. 4. Rear Auto Indicator This indicates when the system is in Rear Auto mode. Rear Mode Control Headliner Mode Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air.
Page 442 440 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In many temperature positions, the Bi-Level Pressing the Rear Temperature Lock button on the front mode is designed to provide cooler air out of the head- ATC panel, illuminates a lock symbol in the rear display. liner outlets and warmer air from the floor outlets.
Page 443 UNDERSTANDING YOUR INSTRUMENT PANEL 441 2. Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs. 3. ATC is selected by adjusting the rear blower knob counterclockwise to AUTO. Once the desired temperature is displayed, the ATC System will automatically achieve and maintain that comfort level.
Page 444 442 UNDERSTANDING YOUR INSTRUMENT PANEL customer-programmable feature. Refer to the “Elec- Rear Temperature Control tronic Vehicle Information Center (EVIC) — Customer- To change the temperature in the rear of the vehicle, Programmable Features” in this Section. rotate the temperature knob counterclockwise to lower the temperature, and clockwise to increase the tempera- Rear Blower Control ture.
Page 445: Summer Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 443 • Bi-Level Mode Winter Operation To ensure the best possible heater and defroster perfor- Air comes from both the headliner outlets and the mance, make sure the engine cooling system is function- floor outlets. ing properly and the proper amount, type, and concen- NOTE: In many temperature positions, the Bi-Level tration of coolant is used.
Page 446: Window Fogging
444 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging A/C Air Filter Vehicle windows tend to fog on the inside in mild, rainy On vehicles equipped with Automatic Temperature Con- and/or humid weather. To clear the windows, select trol (ATC), the climate control system filters out dust and Defrost or Mix mode and increase the front blower speed.
Page 447: Operating Tips Chart
UNDERSTANDING YOUR INSTRUMENT PANEL 445 Operating Tips Chart...
Page 449 STARTING AND OPERATING CONTENTS ▫ Brake/Transmission Shift Interlock System . . .456 STARTING PROCEDURES ....451 ▫ Automatic Transmission ....451 ▫...
Page 450 448 STARTING AND OPERATING ▫ Tire Identification Number (TIN)...490 POWER STEERING .....470 ▫...
Page 451 STARTING AND OPERATING 449 ▫ Compact Spare Tire — If Equipped ..502 FUEL REQUIREMENTS ....519 ▫ Full Size Spare — If Equipped ... .503 ▫...
Page 452 450 STARTING AND OPERATING ▫ Selection Of Engine Oil For Flexible Fuel Vehicles VEHICLE LOADING ....530 (E-85) And Gasoline Vehicles ... . .526 ▫...
Page 453: Starting Procedures
STARTING AND OPERATING 451 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Do not leave the key fob in or near the vehicle, or inside and outside mirrors, fasten your seat belt, and if in a location accessible to children.
Page 454: Extreme Cold Weather (Below -20°F Or −29°C)
452 STARTING AND OPERATING 3. If the engine fails to start, the starter will disengage If The Engine Fails To Start automatically in 10 seconds. If this occurs, turn the WARNING! ignition switch to the OFF position, wait 10 to 15 •...
Page 455: After Starting
STARTING AND OPERATING 453 If the engine fails to start after you have followed the If the engine shows no sign of starting after two 15– “Normal Starting” procedure, it may be flooded. Push second intervals of cranking with the accelerator pedal the accelerator pedal all the way to the floor and hold it held to the floor, the “Normal Starting”...
Page 456: Automatic Transmission
454 STARTING AND OPERATING The engine block heater must be plugged in at least one AUTOMATIC TRANSMISSION hour to have an adequate warming effect on the engine. CAUTION! The engine block heater cord is routed under the hood on the driver’s side of the vehicle. It has a removable cap Damage to the transmission may occur if the follow- that is located on the driver side of the Integrated Power ing precautions are not observed:...
Page 457 STARTING AND OPERATING 455 WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure • It is dangerous to shift out of PARK or NEUTRAL those in or near the vehicle. As with all vehicles, if the engine speed is higher than idle speed. If you should never exit a vehicle while the engine is your foot is not firmly pressing the brake pedal, the running.
Page 458: Key Ignition Park Interlock
456 STARTING AND OPERATING before the ignition switch can be turned to the full OFF WARNING! (Continued) (key removal) position. The key fob can only be removed • Never leave children alone in a vehicle, or with from the ignition when the ignition is in the full OFF access to an unlocked vehicle.
Page 459: Fuel Economy (Econ) Mode
STARTING AND OPERATING 457 Fuel Economy (ECON) Mode When the Fuel Economy (ECON) Mode is engaged, the vehicle control systems will change the following: The Fuel Economy (ECON) mode can improve the vehi- • The transmission will upshift sooner and downshift cle’s overall fuel economy during normal driving condi- tions.
Page 460: Six-Speed Automatic Transmission
458 STARTING AND OPERATING Six-Speed Automatic Transmission The transmission gear position display (located in the instrument cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of PARK (Refer to “Brake/Transmission Shift Inter- lock System”...
Page 461: Gear Ranges
STARTING AND OPERATING 459 The transmission shift lever has only PARK, REVERSE, PARK (P) NEUTRAL, and DRIVE shift positions. Manual down- This range supplements the parking brake by locking the shifts can be made using the Electronic Range Select transmission. The engine can be started in this range. (ERS) shift control (described later in this section).
Page 462 460 STARTING AND OPERATING WARNING! WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL • Never use the PARK position as a substitute for the if the engine speed is higher than idle speed. If parking brake. Always apply the parking brake your foot is not firmly pressing the brake pedal, the fully when parked to guard against vehicle move- vehicle could accelerate quickly forward or in re-...
Page 463 STARTING AND OPERATING 461 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Allowing children to be alone in a vehicle unat- those in or near the vehicle. As with all vehicles, tended is dangerous for a number of reasons. A you should never exit a vehicle while the engine is child or others could be seriously or fatally injured.
Page 464 462 STARTING AND OPERATING The following indicators should be used to ensure that CAUTION! you have engaged the transmission into the PARK posi- • Before moving the shift lever out of PARK, you tion: must turn the ignition switch from the LOCK/OFF •...
Page 465 STARTING AND OPERATING 463 started in this range. Apply the parking brake and shift DRIVE (D) the transmission into PARK if you must leave the vehicle. This range should be used for most city and highway driving. It provides the smoothest upshifts and down- WARNING! shifts, and the best fuel economy.
Page 466 464 STARTING AND OPERATING temperature as well as vehicle speed. This feature im- PARK, REVERSE, and NEUTRAL will continue to oper- proves warm up time of the engine and transmission to ate. The Malfunction Indicator Light (MIL) may be illu- achieve maximum efficiency.
Page 467 STARTING AND OPERATING 465 NOTE: Even if the transmission can be reset, we recom- position, the transmission will operate automatically, mend that you visit your authorized dealer at your shifting between all available gears. Tapping the shift earliest possible convenience. Your authorized dealer has lever to the left (-) will activate ERS mode, display the diagnostic equipment to determine if the problem could current gear in the instrument cluster, and maintain that...
Page 468 466 STARTING AND OPERATING Transmission Gear Position Display Actual Gear(s) Allowed 1–2 1–3 1–4 1–5 1–6 1–6 • The engine coolant has reached an adequate tempera- NOTE: To select the proper gear position for maximum deceleration (engine braking), tap the shift lever to the ture.
Page 469: Driving On Slippery Surfaces
STARTING AND OPERATING 467 NOTE: The torque converter clutch will not engage until WARNING! the transmission fluid and engine coolant are warm [usually after 1 to 3 miles (2 to 5 km) of driving]. Because Rapid acceleration on slippery surfaces is dangerous. the engine speed is higher when the torque converter Unequal traction can cause sudden pulling of the clutch is not engaged, it may seem as if the transmission...
Page 470: Driving Through Water
468 STARTING AND OPERATING 2. Slow down if the road has standing water or puddles. Flowing/Rising Water 3. Replace the tires when tread wear indicators first WARNING! become visible. Do not drive on or across a road or path where water 4.
Page 471: Shallow Standing Water
STARTING AND OPERATING 469 Shallow Standing Water CAUTION! (Continued) Although your vehicle is capable of driving through • Driving through standing water may cause damage shallow standing water, consider the following Cautions to your vehicle’s drivetrain components. Always and Warnings before doing so. inspect your vehicle’s fluids (i.e., engine oil, trans- mission, axle, etc.) for signs of contamination (i.e., CAUTION!
Page 472: Power Steering
470 STARTING AND OPERATING If for some reason the power assist is interrupted, it will WARNING! still be possible to steer your vehicle. Under these condi- • Driving through standing water limits your vehi- tions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during cle’s traction capabilities.
Page 473: Power Steering Fluid Check
STARTING AND OPERATING 471 CAUTION! CAUTION! Prolonged operation of the steering system at the end Do not use chemical flushes in your power steering of the steering wheel travel will increase the steering system as the chemicals can damage your power fluid temperature and it should be avoided when steering components.
Page 474: Parking Brake
472 STARTING AND OPERATING PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied and place the shift lever in the PARK position. The foot operated parking brake is positioned below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully.
Page 475 STARTING AND OPERATING 473 NOTE: WARNING! • When the parking brake is applied and the automatic • When leaving the vehicle, always remove the key transmission is placed in gear, the “Brake Warning fob from the ignition and lock your vehicle. Light”...
Page 476: Anti-Lock Brake System (Abs)
474 STARTING AND OPERATING ANTI-LOCK BRAKE SYSTEM (ABS) WARNING! (Continued) The Anti-Lock Brake System (ABS) provides increased • Be sure the parking brake is fully disengaged vehicle stability and brake performance under most before driving; failure to do so can lead to brake braking conditions.
Page 477 STARTING AND OPERATING 475 • Brake pedal pulsations. WARNING! (Continued) • A slight drop or fall away of the brake pedal at the end • The Anti-Lock Brake System cannot prevent colli- of the stop. sions, including those resulting from excessive speed in turns, following another vehicle too WARNING! closely, or hydroplaning.
Page 478: Anti-Lock Brake Warning Light
476 STARTING AND OPERATING Anti-Lock Brake Warning Light Warning Light” does not come on when the ignition switch is turned to the ON position, have the bulb repaired as soon as possible. The “Anti-Lock Brake Warning Light” moni- tors the anti-lock brake system. The light will If both the “Brake Warning Light”...
Page 479: Traction Control System (Tcs)
STARTING AND OPERATING 477 Traction Control System (TCS) your speed and driving to the prevailing road conditions, and do not switch off the ESC or TCS. The Traction Control System (TCS) monitors the amount of wheel spin of each of the driven wheels. If wheel spin WARNING! is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced, to provide en-...
Page 480: Brake Assist System (Bas)
478 STARTING AND OPERATING Brake Assist System (BAS) WARNING! The Brake Assist System (BAS) is designed to optimize • The BAS cannot prevent the natural laws of phys- the vehicle’s braking capability during emergency brak- ics from acting on the vehicle, nor can it increase ing maneuvers.
Page 481: Electronic Stability Control (Esc)
STARTING AND OPERATING 479 Electronic Stability Control (ESC) WARNING! The Electronic Stability Control (ESC) enhances direc- The Electronic Stability Control System (ESC) cannot tional control and stability of the vehicle under various prevent the natural laws of physics from acting on driving conditions.
Page 482 480 STARTING AND OPERATING ESC Operating Modes ESC Partial Off This mode is entered by momentarily pressing the “ESC The “ESC Off” switch is located in the center Off” switch. switch bank, next to the hazard flasher switch. When in the “Partial Off” mode, the TCS portion of ESC, except for the “limited slip”...
Page 483 STARTING AND OPERATING 481 pressing the “ESC Off” switch. This may be done while WARNING! the vehicle is in motion. • When in Partial Off mode, the TCS functionality ESC Activation/Malfunction Indicator Light And of ESC, (except for the limited slip feature de- ESC OFF Indicator Light scribed in the TCS section), has been disabled and the ESC Off Indicator Light will be illuminated.
Page 484: Trailer Sway Control (Tsc)
482 STARTING AND OPERATING The “ESC Activation/Malfunction Indicator Light” (lo- when ESC becomes inactive following the maneuver cated in the instrument cluster) starts to flash as soon as that caused the ESC activation. the tires lose traction and the ESC system becomes active. The “ESC Activation/Malfunction Indicator Light”...
Page 485: Hill Start Assist (Hsa)
STARTING AND OPERATING 483 to “Trailer Towing” in this section for further informa- brake pedal. If the driver does not apply the throttle tion. When TSC is functioning, the “ESC Activation/ during this short period of time, the system will release Malfunction Indicator Light”...
Page 486 484 STARTING AND OPERATING HSA will work in REVERSE and all forward gears when “Electronic Vehicle Information Center (EVIC)” in “Un- the activation criteria have been met. The system will not derstanding Your Instrument Panel” for further informa- activate if the vehicle is placed in NEUTRAL or PARK. tion.
Page 487 STARTING AND OPERATING 485 7. Press the “ESC Off” switch (located in the lower Towing With HSA switch bank below the climate controls) four times HSA will provide assistance when starting on a grade within 20 seconds. The “ESC Activation/Malfunction when pulling a trailer.
Page 488: Tire Safety Information
486 STARTING AND OPERATING TIRE SAFETY INFORMATION WARNING! (Continued) Tire Markings • HSA is not a parking brake. If you stop the vehicle on a hill without putting the transmission in PARK and using the parking brake, it will roll down the hill and could cause a collision with another ve- hicle or object.
Page 489 STARTING AND OPERATING 487 NOTE: tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preced- • P (Passenger) - Metric tire sizing is based on U.S. ing the size designation. Example: LT235/85R16. design standards.
Page 490 488 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 491 STARTING AND OPERATING 489 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 492: Tire Identification Number (Tin)
490 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
Page 493: Tire Terminology And Definitions
STARTING AND OPERATING 491 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 494: Tire Loading And Tire Pressure
492 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. B-Pillar Location For Tire And Loading Information Placard...
Page 495 STARTING AND OPERATING 493 Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4.
Page 496 494 STARTING AND OPERATING Loading To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of The vehicle maximum load on the tire must not exceed occupants and cargo should never exceed XXX lbs or the load carrying capacity of the tire on your vehicle.
Page 497 STARTING AND OPERATING 495 3. Subtract the combined weight of the driver and pas- NOTE: sengers from XXX lbs or XXX kg. • If your vehicle will be towing a trailer, load from your 4. The resulting figure equals the available amount of trailer will be transferred to your vehicle.
Page 498 496 STARTING AND OPERATING...
Page 499: Tires - General Information
STARTING AND OPERATING 497 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 500: Tire Inflation Pressures
498 STARTING AND OPERATING stability of the vehicle and can produce a feeling of WARNING! (Continued) sluggish response or over responsiveness in the steering. • Unequal tire pressures from one side of the vehicle NOTE: to the other can cause the vehicle to drift to the right or left.
Page 501 STARTING AND OPERATING 499 judgement when determining proper inflation. Tires Check tire pressures more often if subject to a wide range may look properly inflated even when they are under- of outdoor temperatures, as tire pressures vary with inflated. temperature changes. •...
Page 502: Tire Pressures For High Speed Operation
500 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 503: All Season Tires - If Equipped
STARTING AND OPERATING 501 Consult an authorized tire dealer for tire repairs and on ice. If your vehicle is equipped with summer tires, be additional information. aware these tires are not designed for winter or cold driving conditions. For more information, contact a au- Damaged Run Flat tires, or Run Flat tires that have thorized dealer.
Page 504: Spare Tire Matching Original Equipped Tire And Wheel - If Equipped
502 STARTING AND OPERATING Snow tires generally have lower speed ratings than what rotation for your vehicle. If your vehicle has this option, was originally equipped with your vehicle and should refer to an authorized tire dealer for the recommended not be operated at sustained speeds over 75 mph tire rotation pattern.
Page 505: Full Size Spare - If Equipped
STARTING AND OPERATING 503 Do not install a wheel cover or attempt to mount a front or rear axle of your vehicle, but it is not. This spare conventional tire on the compact spare wheel, since the tire may have limited tread life. When the tread is worn wheel is designed specifically for the compact spare tire.
Page 506: Tire Spinning
504 STARTING AND OPERATING Refer to “Freeing A Stuck Vehicle” in “What To Do In WARNING! Emergencies” for further information. Limited-use spares are for emergency use only. In- WARNING! stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the Fast spinning tires can be dangerous.
Page 507: Life Of Tire
STARTING AND OPERATING 505 tread wear indicators, the tire should be replaced. Refer to “Replacement Tires” in this section for further infor- mation. Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: •...
Page 508: Replacement Tires
506 STARTING AND OPERATING Information placard or the Vehicle Certification Label for WARNING! the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original Tires and the spare tire should be replaced after six equipment tire sidewall.
Page 509: Tire Chains (Traction Devices)
STARTING AND OPERATING 507 WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 510 508 STARTING AND OPERATING • Install on front tires only. CAUTION! • On a 225/65R16 100H use of a traction device that To avoid damage to your vehicle or tires, observe the meets the SAE type “Class S” specification is recom- following precautions: mended.
Page 511: Tire Rotation Recommendations
STARTING AND OPERATING 509 These effects can be reduced by timely rotation of tires. CAUTION! (Continued) The benefits of rotation are especially worthwhile with • Observe the traction device manufacturer’s instruc- aggressive tread designs such as those on all season type tions on the method of installation, operating tires.
Page 512: Tire Pressure Monitor System (Tpms)
510 STARTING AND OPERATING The suggested rotation method is the “rearward cross” TIRE PRESSURE MONITOR SYSTEM (TPMS) shown in the following diagram. This rotation pattern The TPMS will warn the driver of a low tire pressure does not apply to some directional tires that must not be based on the cold inflation tire placard pressure require- reversed.
Page 513 STARTING AND OPERATING 511 The TPMS will warn the driver of a low tire pressure if For example, your vehicle may have a recommended the tire pressure falls below the low pressure warning cold (parked for more than three hours) tire placard threshold for any reason, including low temperature pressure of 35 psi (241 kPa).
Page 514 512 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance, or to provide warning of a tire equipment tires and wheels. TPMS pressures have failure or condition.
Page 515: Base System
STARTING AND OPERATING 513 • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Tire Pressure and the TPMS will monitor the actual tire pressure in Warnings the tire. The “Tire Pressure Monitoring Telltale Light” Base System will illuminate in the instrument cluster, a The TPMS uses wireless technology with wheel rim “LOW TIRE PRESSURE”...
Page 516 514 STARTING AND OPERATING • Accumulation of excessive snow and/or ice around NOTE: The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this infor- the wheels or wheel housings. mation. •...
Page 517: Premium System - If Equipped
STARTING AND OPERATING 515 • After driving for up to 20 minutes above 15 mph Premium System — If Equipped (24 km/h), the “Tire Pressure Monitoring Telltale The TPMS uses wireless technology with wheel rim- Light” will flash on and off for 75 seconds and then mounted electronic sensors to monitor tire pressure lev- remain on solid.
Page 518: Starting And Operating
516 STARTING AND OPERATING TPMS Low Pressure Warnings NOTE: The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this infor- The “Tire Pressure Monitoring Telltale Light” will illumi- mation. nate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire SERVICE TPM SYSTEM Message pressures are low.
Page 519 STARTING AND OPERATING 517 message will not be present, and a pressure value will be message is then followed by a graphic display with displayed instead of dashes. A system fault can occur by pressure values still shown. This indicates that the pres- any of the following scenarios: sure values are still being received from the TPM sensors but they may not be in the correct vehicle position.
Page 520 518 STARTING AND OPERATING • After driving the vehicle for up to 20 minutes above and the graphic in the EVIC will display a new 15 mph (24 km/h), the “Tire Pressure Monitoring pressure value instead of dashes (- -), as long no tire Telltale Light”...
Page 521: Fuel Requirements
STARTING AND OPERATING 519 The TPM sensors are regulated under one of the follow- Light spark knock at low engine speeds is not harmful to ing licenses: your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is United States MRXC4W4MA4 required.
Page 522: Reformulated Gasoline
520 STARTING AND OPERATING Reformulated Gasoline CAUTION! Many areas of the country require the use of cleaner DO NOT use gasoline containing Methanol or gaso- burning gasoline referred to as “Reformulated Gasoline.” line containing more than 10% Ethanol. Use of these Reformulated gasolines contain oxygenates and are spe- blends may result in starting and drivability prob- cifically blended to reduce vehicle emissions and im-...
Page 523: E-85 Usage In Non-Flex Fuel Vehicles
STARTING AND OPERATING 521 • Disconnect and reconnect the battery to reset the E-85 Usage In Non-Flex Fuel Vehicles engine controller memory. Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing 10% ethanol (E10). Gasoline with higher etha- More extensive repairs will be required for prolonged nol content may void the New Vehicle Limited Warranty.
Page 524: Materials Added To Fuel
522 STARTING AND OPERATING Materials Added To Fuel CAUTION! (Continued) All gasoline sold in the United States is required to • An out-of-tune engine or certain fuel or ignition contain effective detergent additives. Use of additional malfunctions can cause the catalytic converter to detergents or other additives is not needed under normal overheat.
Page 525: Carbon Monoxide Warnings
STARTING AND OPERATING 523 Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 526: Flexible Fuel - If Equipped
524 STARTING AND OPERATING FLEXIBLE FUEL — IF EQUIPPED E-85 General Information The information in this section is for Flexible Fuel ve- hicles only. These vehicles can be identified by a unique fuel filler door label that states Ethanol (E-85) or Un- leaded Gasoline Only.
Page 527: Ethanol Fuel (E-85)
STARTING AND OPERATING 525 WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
Page 528: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
526 STARTING AND OPERATING When you do switch fuel types it is recommended that: engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline • You do not add less than 5 gallons (19 Liters) when additive, such as MOPAR®...
Page 529: Starting
STARTING AND OPERATING 527 Starting Replacement Parts The characteristics of E-85 fuel make it unsuitable for use Many components in your Flexible Fuel Vehicle (FFV) are when ambient temperatures fall below 0°F (-18°C). In the designed to be compatible with ethanol. Always be sure range of 0°F (-18°C) to 32°F (0°C), you may experience an that your vehicle is serviced with correct ethanol com- increase in the time it takes for your engine to start, and...
Page 530: Adding Fuel
528 STARTING AND OPERATING ADDING FUEL NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only Fuel Filler Cap (Gas Cap) when the sliding door is fully closed prior to opening the The gas cap is located behind the fuel filler door on the fuel door.
Page 531: Loose Fuel Filler Cap Message
STARTING AND OPERATING 529 • Tighten the fuel filler cap until you hear a “clicking” WARNING! sound. This is an indication that the fuel filler cap is • Never have any smoking materials lit in or near the properly tightened. vehicle when the gas cap is removed or the tank is •...
Page 532: Vehicle Loading
530 STARTING AND OPERATING properly tightened. Refer to “Onboard Diagnostic Sys- The label contains the following information: tem” in “Maintaining Your Vehicle” for further informa- • Name of manufacturer tion. • Month and year of manufacture If the problem continues, the message will appear the •...
Page 533 STARTING AND OPERATING 531 Gross Axle Weight Rating (GAWR) Rim Size The GAWR is the maximum capacity of the front and rear This is the rim size that is appropriate for the tire size axles. Distribute the load over the front and rear axles listed.
Page 534 532 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle-by-axle and side-by-side. Store heavier items service as long as you do not exceed the GVWR and the down low and be sure you distribute their weight as front and rear GAWR.
Page 535: Trailer Towing
STARTING AND OPERATING 533 TRAILER TOWING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting and Operating” for In this section you will find safety tips and information further information. on limits to the type of towing you can reasonably do with your vehicle.
Page 536 534 STARTING AND OPERATING rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica- Frontal Area tion Label” in “Starting and Operating” for further The frontal area is the maximum height multiplied by the information. maximum width of the front of a trailer. Trailer Sway Control WARNING! The trailer sway control can be a mechanical telescoping...
Page 537 STARTING AND OPERATING 535 Weight-Carrying Hitch in accordance with the manufacturer’s directions, it pro- vides for a more level ride, offering more consistent A weight-carrying hitch supports the trailer tongue steering and brake control thereby enhancing towing weight, just as if it were luggage located at a hitch ball or safety.
Page 538 536 STARTING AND OPERATING Trailer Hitch Classification Definitions WARNING! Class Max. Trailer Hitch In- • An improperly adjusted Weight Distributing Hitch dustry Standards system may reduce handling, stability, braking Class I - Light Duty 2,000 lbs (907 kg) performance, and could result in a collision. •...
Page 539 STARTING AND OPERATING 537 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. GCWR (Gross Engine/ Max. GTW (Gross Max. Tongue Combined Weight Frontal Area Transmission Trailer Weight) Weight Rating) 3.6L/Automatic...
Page 540 538 STARTING AND OPERATING NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information”...
Page 541 STARTING AND OPERATING 539 NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options or dealer-installed options must trailer is towed, do not drive over 50 mph (80 km/h) be considered as part of the total load on your vehicle.
Page 542 540 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Vehicles with trailers should not be parked on a • Make certain that the load is secured in the trailer grade. When parking, apply the parking brake on and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts the tow vehicle.
Page 543 STARTING AND OPERATING 541 Towing Requirements — Tires replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s • Do not attempt to tow a trailer while using a compact GVWR and GAWR limits. spare tire. Towing Requirements —...
Page 544 542 STARTING AND OPERATING CAUTION! WARNING! (Continued) • Towing any trailer will increase your stopping If the trailer weighs more than 1,000 lbs (454 kg) distance. When towing you should allow for addi- loaded, it should have its own brakes and they tional space between your vehicle and the vehicle should be of adequate capacity.
Page 545 STARTING AND OPERATING 543 The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Seven-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 —...
Page 546: Towing Tips
544 STARTING AND OPERATING Towing Tips If you REGULARLY tow a trailer for more than 45 minutes of continuous operation, then change the trans- Before setting out on a trip, practice turning, stopping, mission fluid and filter as specified for “police, taxi, fleet, and backing up the trailer in an area located away from or frequent trailer towing.”...
Page 547: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 545 Cooling System Highway Driving To reduce potential for engine and transmission over- Reduce speed. heating, take the following actions: Air Conditioning City Driving Turn off temporarily. When stopped for short periods, shift the transmission into NEUTRAL and increase engine idle speed. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition...
Page 548: Recreational Towing - All Models
546 STARTING AND OPERATING Recreational Towing — All Models CAUTION! Recreational towing is allowed ONLY if the front wheels DO NOT flat tow this vehicle. Damage to the drive- are OFF the ground. This may be accomplished using a train will result. tow dolly or vehicle trailer.
Page 549 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...549 JACKING AND TIRE CHANGING — IF EQUIPPED ......562 IF YOUR ENGINE OVERHEATS .
Page 550 548 WHAT TO DO IN EMERGENCIES ▫ Road Tire Installation ....580 FREEING A STUCK VEHICLE ... . .586 JUMP-STARTING .
Page 551: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 549 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the lower center area of the instrument panel. potential for overheating by taking the appropriate action. •...
Page 552: Tirefit Kit - If Equipped
550 WHAT TO DO IN EMERGENCIES TIREFIT KIT — IF EQUIPPED CAUTION! Small punctures up to ¼” (6 mm) in the tire tread can be Driving with a hot cooling system could damage sealed with TIREFIT. Foreign objects (e.g., screws or your vehicle.
Page 553: Tirefit Storage
WHAT TO DO IN EMERGENCIES 551 TIREFIT Storage 2. Turn the two rear left side trim panel latches to release the trim panel. The TIREFIT kit is stowed behind the rear left side trim panel in the rear cargo area. TIREFIT Kit TIREFIT Kit Location 1.
Page 554: Tirefit Kit Components And Operation
552 WHAT TO DO IN EMERGENCIES TIREFIT Kit Components And Operation Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only.
Page 555: Tirefit Usage Precautions
WHAT TO DO IN EMERGENCIES 553 Using The Power Button Push and release the Power Button (4) once to turn On the TIREFIT kit. Push and release the Power Button (4) again to turn Off the TIREFIT kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
Page 556 554 WHAT TO DO IN EMERGENCIES the vehicle or tire and wheel components. Once the WARNING! sealant dries, it can easily be peeled off and properly • Do not attempt to seal a tire on the side of the discarded. vehicle closest to traffic.
Page 557: Sealing A Tire With Tirefit
WHAT TO DO IN EMERGENCIES 555 WARNING! (Continued) WARNING! (Continued) • Keep TIREFIT away from open flames or heat • TIREFIT Sealant solution contains latex. In case of source. an allergic reaction or rash, consult a physician • A loose TIREFIT kit thrown forward in a collision immediately.
Page 558 556 WHAT TO DO IN EMERGENCIES ground. This will provide the best positioning of the 4. Remove the cap from the valve stem and then screw kit when injecting the sealant into the deflated tire and the fitting at the end of the Sealant Hose (6) onto the running the air pump.
Page 559 WHAT TO DO IN EMERGENCIES 557 NOTE: Sealant may leak out through the puncture in the NOTE: If the Mode Select Knob (5) is on Air Mode and tire. the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant (white fluid) does not flow within 0 –...
Page 560 558 WHAT TO DO IN EMERGENCIES If the tire does not inflate to at least 26 psi (1.8 Bar) storage location. Quickly proceed to (D) “Drive Ve- pressure within 15 minutes: hicle.” • The tire is too badly damaged. Do not attempt to drive CAUTION! the vehicle further.
Page 561 WHAT TO DO IN EMERGENCIES 559 3. Uncoil the Air Pump Hose (7) (black in color) and WARNING! screw the fitting at the end of hose (7) onto the valve stem. TIREFIT is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using 4.
Page 562 560 WHAT TO DO IN EMERGENCIES 2. Disconnect the TIREFIT kit from the valve stem, (F) Sealant Bottle And Hose Replacement: reinstall the cap on the valve stem and unplug from 12 1. Uncoil the Sealant Hose (6) (clear in color). Volt outlet.
Page 563: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 561 7. Return the TIREFIT kit to its storage location in the Inspect the wheel mounting surface prior to mounting vehicle. the tire and remove any corrosion or loose particles. WHEEL AND TIRE TORQUE SPECIFICATIONS Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle.
Page 564: Jacking And Tire Changing - If Equipped
562 WHAT TO DO IN EMERGENCIES Tighten the lug nuts/bolts in a star pattern until each WARNING! nut/bolt has been tightened twice. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered.
Page 565: Jack Location
WHAT TO DO IN EMERGENCIES 563 Jack Location WARNING! (Continued) The jack, jack handle and winch handle tools are stowed • Being under a jacked-up vehicle is dangerous. The behind the rear left side trim panel in the rear cargo area. vehicle could slip off the jack and fall on you.
Page 566: Spare Tire Removal
564 WHAT TO DO IN EMERGENCIES Spare Tire Removal To Access Spare Tire Winch Drive Nut The spare tire is stowed inside a protective cover located To access the spare tire winch drive nut and lower the under the center of the vehicle between the front doors by spare tire, you will need to refer to one of the following means of a cable winch mechanism.
Page 567 WHAT TO DO IN EMERGENCIES 565 2. Open the front drawer to expose the storage compart- ment. 3. Remove the liner from the console’s storage compart- ment to access the spare tire winch drive nut. Super Console 1 — Lower Drawer 2 —...
Page 568: Spare Tire Tools
566 WHAT TO DO IN EMERGENCIES Premium/Base/Cargo Center Console Spare Tire Tools Pull the Winch Cover assembly plug (if equipped) to The tool pouch contains three pieces and can be as- access the winch drive nut. sembled into a spare tire hook; to remove the compact spare tire/cover assembly from under the vehicle, or a Winch T-handle;...
Page 569 WHAT TO DO IN EMERGENCIES 567 Assembled T-handle Assembling The Spare Tire Hook A — Spare Tire Hook/T-handle A — Spare Tire Hook/T-handle B — Extension 1 B — Extension 1 C — Extension 2 C — Extension 2...
Page 570: Spare Tire Removal Instructions
568 WHAT TO DO IN EMERGENCIES Spare Tire Removal Instructions 2. Rotate the nut to the left until the winch mechanism stops turning freely. This will allow enough slack in The spare tire is located under the vehicle beneath the the cable to allow you to pull the spare tire out from center console area.
Page 571 WHAT TO DO IN EMERGENCIES 569 4. Stand the tire/cover assembly upright and remove the wheel spacer by squeezing the winch retaining tabs together. Push the retainer through the spare tire to release it from the wheel. Pulling Spare Tire NOTE: If either front tire is flat it may be necessary to jack up the vehicle to remove the compact spare tire/ cover assembly from under the vehicle.
Page 572: Preparations For Jacking
570 WHAT TO DO IN EMERGENCIES Preparations For Jacking 6. Block both the front and rear of the wheel diagonally opposite the jack- 1. Park the vehicle on a firm, level surface. Avoid ice or ing position. For example, if chang- slippery areas.
Page 573 WHAT TO DO IN EMERGENCIES 571 WARNING! (Continued) WARNING! (Continued) • Only use the jack in the positions indicated and for • Always park on a firm, level surface as far from the lifting this vehicle during a tire change. edge of the roadway as possible before raising the •...
Page 574 572 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. NOTE: Refer to the “Compact Spare Tire” section of “Tires – General Information” for information about the compact spare tire, its use, and operation.
Page 575 WHAT TO DO IN EMERGENCIES 573 Rear Jacking Locations Rear Jack Engaged...
Page 576 574 WHAT TO DO IN EMERGENCIES Front jack location is on the sill flange of the vehicle body and is located 6 in (150 mm) from door edge. Front Jack Engaged NOTE: In some situations the jack may need to be placed on its side in order to be pushed under the vehicle.
Page 577 WHAT TO DO IN EMERGENCIES 575 4. Raise the vehicle by turning the jack screw to the right, WARNING! using the swivel wrench. Raise the vehicle only until the tire just clears the surface and enough clearance is Being under a jacked-up vehicle is dangerous. The obtained to install the compact spare tire.
Page 578 576 WHAT TO DO IN EMERGENCIES 5. Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover from the wheel by hand. Do not pry the wheel cover off. Then pull the wheel off the hub. 6. Install the compact spare tire. Lightly tighten the lug nuts.
Page 579 WHAT TO DO IN EMERGENCIES 577 NOTE: Do not install the wheel cover on the compact 10. Place the deflated (flat) tire and compact spare tire spare. cover assembly in the rear cargo area. Do not stow the deflated tire in the compact spare tire location. 7.
Page 580: Securing The Compact Spare Tire
578 WHAT TO DO IN EMERGENCIES Securing The Compact Spare Tire CAUTION! 1. Assemble the winch handle extensions to form a The winch mechanism is designed for use with the T-handle and fit the winch T-handle over the drive winch T-handle only. Use of an air wrench or other nut.
Page 581 WHAT TO DO IN EMERGENCIES 579 4. Using the winch T-handle, rotate the drive nut to the CAUTION! right until the compact spare tire/cover assembly is drawn into place against the underside of the vehicle. The compact spare tire/cover assembly must be used when the compact spare tire is stored.
Page 582: Road Tire Installation
580 WHAT TO DO IN EMERGENCIES Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem.
Page 583 WHAT TO DO IN EMERGENCIES 581 3. Align the valve notch in the wheel cover with the 7. After 25 miles (40 km) check the lug nut torque with a valve stem on the wheel. Install the cover by hand, torque wrench to ensure that all lug nuts are properly snapping the cover over the two lug nuts.
Page 584: Jump-Starting
582 WHAT TO DO IN EMERGENCIES 4. Refer to “Torque Specifications” in this section for CAUTION! proper wheel lug nut torque. Do not use a portable battery booster pack or any 5. After 25 miles (40 km) check the lug nut torque with a other booster source with a system voltage greater torque wrench to ensure that all lug nuts are properly than 12 Volts or damage to the battery, starter motor,...
Page 585: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 583 Preparations For Jump-Start WARNING! The battery in your vehicle is located on the left side of • Take care to avoid the radiator cooling fan when- the engine compartment. ever the hood is raised. It can start anytime the ignition switch is ON.
Page 586: Jump-Starting Procedure
584 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 587 WHAT TO DO IN EMERGENCIES 585 6. Once the engine is started, remove the jumper cables WARNING! in the reverse sequence: Do not connect the jumper cable to the negative (-) Disconnecting The Jumper Cables post of the discharged battery. The resulting electri- 1.
Page 588: Freeing A Stuck Vehicle
586 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! Accessories plugged into the vehicle power outlets Racing the engine or spinning the wheels may lead to draw power from the vehicle’s battery, even when not transmission overheating and failure. Allow the en- in use (i.e., cellular phones, etc.).
Page 589: Shift Lever Override
WHAT TO DO IN EMERGENCIES 587 CAUTION! WARNING! • When “rocking” a stuck vehicle by shifting be- Fast spinning tires can be dangerous. Forces gener- tween DRIVE and REVERSE, do not spin the ated by excessive wheel speeds may cause damage, or wheels faster than 15 mph (24 km/h), or drivetrain even failure, of the axle and tires.
Page 590: Towing A Disabled Vehicle
588 WHAT TO DO IN EMERGENCIES 3. Using a small screwdriver or similar tool, remove the 4. Press and maintain firm pressure on the brake pedal. shift lever override access cover (located near the top 5. Insert the screwdriver or similar tool into the access right of the shift lever in the instrument panel).
Page 591 WHAT TO DO IN EMERGENCIES 589 Towing Condition Wheels OFF the Ground ALL MODELS Flat Tow NONE If transmission is operable: • Transmission in NEUTRAL Wheel lift Rear • 25 mph (40 km/h) max speed • 15 miles (24 km) max distance Front Flatbed BEST METHOD...
Page 592 590 WHAT TO DO IN EMERGENCIES • The towing speed must not exceed 25 mph (40 km/h). CAUTION! If the transmission is not operable, or the vehicle must • Do not use sling type equipment when towing. be towed faster than 25 mph (40 km/h) or farther than 15 Damage to the fascia will occur.
Page 593: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Air Cleaner Filter ....601 ENGINE COMPARTMENT — 3.6L ..593 ▫ Exhaust System ..... .602 ONBOARD DIAGNOSTIC SYSTEM —...
Page 594 592 MAINTAINING YOUR VEHICLE ▫ Appearance Care And Protection ▫ Fog Lamps ......636 From Corrosion ..... .621 ▫...
Page 595: Engine Compartment - 3.6L
MAINTAINING YOUR VEHICLE 593 ENGINE COMPARTMENT — 3.6L 1 — Air Filter 6 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Battery 9 —...
Page 596: Onboard Diagnostic System - Obd Ii
594 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated Onboard • Prolonged driving with the MIL on could cause Diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 597: Loose Fuel Filler Cap Message
MAINTAINING YOUR VEHICLE 595 Loose Fuel Filler Cap Message EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a In some localities, it may be a legal requirement to pass “gASCAP”...
Page 598 596 MAINTAINING YOUR VEHICLE Your vehicle has a simple ignition key-actuated test, the ignition or start the engine. This means that your which you can use prior to going to the test station. To vehicle’s OBD II system is not ready and you should check if your vehicle’s OBD II system is ready, you must not proceed to the I/M station.
Page 599: Replacement Parts
MAINTAINING YOUR VEHICLE 597 before going to the I/M station. The I/M station can fail NOTE: Intentional tampering with emissions control your vehicle because the MIL is on with the engine systems may void your warranty and could result in civil running.
Page 600 598 MAINTAINING YOUR VEHICLE Besides those maintenance items specified in the fixed CAUTION! (Continued) “Maintenance Schedule”, there are other components • Your vehicle has been built with improved fluids which may require servicing or replacement in the future. that protect the performance and durability of your vehicle and also allow extended maintenance inter- CAUTION! vals.
Page 601: Engine Oil
MAINTAINING YOUR VEHICLE 599 Engine Oil Change Engine Oil The oil change indicator system will remind you that it is Checking Oil Level time to take your vehicle in for scheduled maintenance. To assure proper engine lubrication, the engine oil must Refer to the “Maintenance Schedule”...
Page 602 600 MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Engine Oil Viscosity — 3.6L Engine Identification Symbol MOPAR® SAE 5W-20 engine oil approved to Chrysler Material Standard MS-6395 such as Pennzoil®, Shell This symbol means that the oil has Helix®...
Page 603: Engine Oil Filter
MAINTAINING YOUR VEHICLE 601 Synthetic Engine Oils station or governmental agency for advice on how and where used oil and oil filters can be safely discarded in You may use synthetic engine oils provided the recom- your area. mended oil quality requirements are met, and the recom- mended maintenance intervals for oil and filter changes Engine Oil Filter are followed.
Page 604: Exhaust System
602 MAINTAINING YOUR VEHICLE Exhaust System WARNING! The best protection against carbon monoxide entry into The air induction system (air cleaner, hoses, etc.) can the vehicle body is a properly maintained engine exhaust provide a measure of protection in the case of engine system.
Page 605 MAINTAINING YOUR VEHICLE 603 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions control and can eventually poison you.
Page 606: Maintenance-Free Battery
604 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 607 MAINTAINING YOUR VEHICLE 605 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Do not allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.
Page 608: Air Conditioner Maintenance
606 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer approved by the manufacturer for your air condi- at the start of each warm season. This service should tioning system.
Page 609 MAINTAINING YOUR VEHICLE 607 Refrigerant Recovery And Recycling WARNING! R-134a Air Conditioning Refrigerant is a hydrofluoro- Do not remove the A/C air filter while the blower is carbon (HFC) that is endorsed by the Environmental operating or personal injury may result. Protection Agency and is an ozone-saving product.
Page 610: Body Lubrication
608 MAINTAINING YOUR VEHICLE 4. Disengage the two retaining tabs that secure the filter cover, make sure the retaining tabs fully engage the cover to the HVAC housing, and remove the cover. cover. CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter.
Page 611: Windshield Wiper Blades
MAINTAINING YOUR VEHICLE 609 be wiped clean to remove dust and grit; after lubricating Operation of the wipers on dry glass for long periods excess oil and grease should be removed. Particular may cause deterioration of the wiper blades. Always use attention should also be given to hood latching compo- washer fluid when using the wipers to remove salt or dirt nents to ensure proper function.
Page 612: Cooling System
610 MAINTAINING YOUR VEHICLE Fill the reservoir with windshield washer solvent (not Cooling System radiator antifreeze) and operate the system for a few seconds to flush out any residual water. WARNING! The washer fluid reservoir will hold a full gallon of fluid •...
Page 613 MAINTAINING YOUR VEHICLE 611 applicable). If the engine coolant (antifreeze) is dirty, the Cooling System — Drain, Flush, And Refill system should be drained, flushed, and refilled with If the engine coolant (antifreeze) is dirty or contains fresh OAT coolant (conforming to MS-12106) only by an visible sediment, have an authorized dealer clean and authorized dealer.
Page 614 612 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 615 MAINTAINING YOUR VEHICLE 613 • Use only high purity water such as distilled or deion- you use the same engine coolant (OAT coolant conform- ing to MS-12106) throughout the life of your vehicle. ized water when mixing the water/engine coolant (antifreeze) solution.
Page 616 614 MAINTAINING YOUR VEHICLE • Mixing engine coolant (antifreeze) types is not recom- WARNING! mended and can result in cooling system damage. If • The warning words “DO NOT OPEN HOT” on the HOAT and OAT coolant are mixed in an emergency, have a authorized dealer drain, flush, and refill with cooling system pressure cap are a safety precaution.
Page 617 MAINTAINING YOUR VEHICLE 615 rules for your community. To prevent ingestion by ani- When additional engine coolant (antifreeze) is needed to mals or children, do not store ethylene glycol-based maintain the proper level, only OAT coolant that meets engine coolant in open containers or allow it to remain in the requirements of Chrysler Material Standard MS- puddles on the ground.
Page 618 616 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in • Make sure that the coolant expansion bottle overflow the coolant expansion bottle. If engine coolant (anti- hoses are not kinked or obstructed. freeze) needs to be added, the contents of the coolant •...
Page 619: Brake System
MAINTAINING YOUR VEHICLE 617 Brake System Master Cylinder — Brake Fluid Level Check In order to assure brake system performance, all brake The fluid level in the master cylinder should be checked system components should be inspected periodically. when performing underhood services, or immediately if Refer to the “Maintenance Schedule”...
Page 620 618 MAINTAINING YOUR VEHICLE Use only manufacturer’s recommended brake fluid. Re- WARNING! (Continued) fer to “Fluids, Lubricants, and Genuine Parts” in “Main- • To avoid contamination from foreign matter or taining Your Vehicle” for further information. moisture, use only new brake fluid or fluid that has been in a tightly closed container.
Page 621: Automatic Transmission
MAINTAINING YOUR VEHICLE 619 WARNING! (Continued) CAUTION! • Do not allow petroleum based fluid to contaminate Using a transmission fluid other than the manufac- the brake fluid. Brake seal components could be turer’s recommended fluid may cause deterioration damaged, causing partial or complete brake failure. in transmission shift quality and/or torque converter This could result in a collision.
Page 622 620 MAINTAINING YOUR VEHICLE leaks. Avoid using transmission sealers as they may your authorized dealer immediately to have the trans- adversely affect seals. mission fluid level checked. Operating the vehicle with an improper fluid level can cause severe transmission CAUTION! damage.
Page 623: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 621 Appearance Care And Protection From Corrosion What Causes Corrosion? Corrosion is the result of deterioration or removal of Protection Of Body And Paint From Corrosion paint and protective coatings from your vehicle. Vehicle body care requirements vary according to geo- graphic locations and usage.
Page 624 622 MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use MOPAR® Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once •...
Page 625 MAINTAINING YOUR VEHICLE 623 • If you carry special cargo such as chemicals, fertilizers, • For aluminum wheels, use MOPAR® Wheel Cleaner de-icer salt, etc., be sure that such materials are well (Part# 04796239AB) or equivalent. packaged and sealed. CAUTION! •...
Page 626 624 MAINTAINING YOUR VEHICLE • Blot any remaining stain with a clean, damp towel. Cleaning Interior Trim • For tough stains, apply MOPAR® Total Clean, or a Interior trim should be cleaned starting with a damp mild soap solution to a clean, damp cloth and remove cloth, a damp cloth with MOPAR®...
Page 627 MAINTAINING YOUR VEHICLE 625 liquid. Please do not use polishes, oils, cleaning fluids, To minimize the possibility of scratching the lenses and solvents, detergents, or ammonia-based cleaners to clean reducing light output, avoid wiping with a dry cloth. To your leather upholstery. Application of a leather condi- remove road dirt, wash with a mild soap solution fol- tioner is not required to maintain the original condition.
Page 628: Cleaning The Instrument Panel Cupholders
626 MAINTAINING YOUR VEHICLE When cleaning the rear view mirror, spray cleaner on the If the belts need cleaning, use MOPAR® Total Clean, a towel or rag that you are using. Do not spray cleaner mild soap solution, or lukewarm water. Do not remove directly on the mirror.
Page 629: Fuses
MAINTAINING YOUR VEHICLE 627 Cleaning FUSES The liner is top shelf dishwasher safe, or you may follow WARNING! the cleaning procedure below. • When replacing a blown fuse, always use an appro- Soak the liner in a mixture of medium hot tap water and priate replacement fuse with the same amp rating as one teaspoon of mild liquid dish soap.
Page 630: Totally Integrated Power Module
628 MAINTAINING YOUR VEHICLE Totally Integrated Power Module CAUTION! The Totally Integrated Power Module is located in the • When installing the Totally Integrated Power Mod- engine compartment near the battery. Refer to the appli- ule cover, it is important to ensure the cover is cable “Engine Compartment”...
Page 631 MAINTAINING YOUR VEHICLE 629 Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green — Power Folding Seat 30 Amp Pink — Power Liftgate Module 30 Amp Pink — Rear Door Module 25 Amp Natu- — Driver Door Node 25 Amp Natu- —...
Page 632 630 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 30 Amp Pink HVAC Rear Blower, Radiator Fan Motor 60 Amp Yellow — Ignition Off Draw (IOD) – Main 40 Amp Green — Rear Window Defogger 40 Amp Green — Front Blower 40 Amp Green —...
Page 633 MAINTAINING YOUR VEHICLE 631 Cavity Cartridge Fuse Mini-Fuse Description — 25 Amp Natural Inverter — 20 Amp Yellow Power Outlet #1 (ACC), Rain Sensor, Cigar Lighter (Instru- ment Panel or with Console Rear) — 20 Amp Yellow Power Outlet #2 (BATT/ACC SELECT) – Center Seat or with Console Rear —...
Page 634 632 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description — 20 Amp Yellow Rear View Mirror, Instrument Cluster, Multi-Function Con- trol Switch, Tire Pressure Monitor, Glow Plug Module – If Equipped — 10 Amp Red Airbag Module/Occupant Classification Module — 15 Amp Blue Left Tail/License/Park Lamp, Running Lamps —...
Page 635 MAINTAINING YOUR VEHICLE 633 Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Wireless Control Module, Keyless Entry Module — 10 Amp Red Powertrain, Transmission Control Module — 10 Amp Red Occupant Classification Module — 15 Amp Blue Rear Wiper Module, Power Folding Mirror —...
Page 636: Vehicle Storage
634 MAINTAINING YOUR VEHICLE The power windows are fused by a 25 Amp circuit REPLACEMENT BULBS breaker located in the Totally Integrated Power Module. Interior Bulbs VEHICLE STORAGE Bulb Number If you are leaving your vehicle dormant for more than 21 Center &...
Page 637: Bulb Replacement
MAINTAINING YOUR VEHICLE 635 Bulb Number Bulb Number Removable Console Center High-Mounted LED (Serviced at Autho- Lamp – If Equipped Stop Lamp rized Dealer) Visor Vanity Lamps 6501966 Backup Lamp 3157 License NOTE: For lighted switches, see your authorized dealer for replacement instructions. NOTE: All of the interior bulbs are glass wedge base or glass cartridge types.
Page 638: Headlamps
636 MAINTAINING YOUR VEHICLE Headlamps 5. Connect the wiring connector to bulb and slide red lock tab forward. 1. Raise the hood to access the rear of the headlamp housing. Front Park/Turn Signal Lamps 2. Slide the red lock tab rearward on the connector, then 1.
Page 639: Rear Tail, Stop, Turn Signal, Side Marker And Backup Lamps
MAINTAINING YOUR VEHICLE 637 1. From behind the bumper fascia, or the access panel on 2. Remove the tail lamp assembly by removing the two the air dam, squeeze the two tabs on the side of the screws from the inboard side. Use a fiber stick or bulb socket and pull straight out from the fog lamp.
Page 640: Center High-Mounted Stop Lamp (Chmsl)
638 MAINTAINING YOUR VEHICLE NOTE: License Lamp • If a screwdriver is used, make sure a soft material is The license plate lamp is located under the tailgate light placed between the vehicle body and tool so not to bar and above the license plate. scratch the paint.
Page 641: Fluid Capacities
MAINTAINING YOUR VEHICLE 639 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 20 Gallons 76 Liters Engine Oil with Filter 3.6L Engine (SAE 5W-20, API Certified). 6 Quarts 5.6 Liters Cooling System * 3.6L Engine (MOPAR® Antifreeze/Engine Coolant 10 13.4 Quarts 12.6 Liters Year/150,000 Mile Formula or equivalent) meeting the requirements of Chrysler Material Standard MS-12106.
Page 642: Fluids, Lubricants And Genuine Parts
640 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the require- ments of Chrysler Material Standard MS-12106. Engine Oil We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR®,...
Page 643: Chassis
MAINTAINING YOUR VEHICLE 641 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use Only ATF+4® Automatic Transmission Fluid. Fail- ure to use ATF+4® fluid may affect the function or performance of your transmission. We recommend MOPAR® ATF+4® Fluid. Brake Master Cylinder We recommend you use MOPAR®...
Page 645 MAINTENANCE SCHEDULES CONTENTS MAINTENANCE SCHEDULE ... . .644 ▫ Maintenance Chart ....646...
Page 646 644 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change. If a Your vehicle is equipped with an automatic oil change scheduled oil change is performed by someone other indicator system.
Page 647 MAINTENANCE SCHEDULES 645 Once A Month Or Before A Long Trip: At Every Oil Change Interval As Indicated By Oil • Check engine oil level Change Indicator System: • Change oil and filter. • Check windshield washer fluid level • Rotate the tires. Rotate at the first sign of irregu- •...
Page 648 646 MAINTENANCE SCHEDULES Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary.
Page 649 MAINTENANCE SCHEDULES 647 Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Change automatic transmission fluid and filter if us- ing your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing.
Page 650 648 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 651: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .651 Impaired (TDD/TTY).
Page 652 650 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .658 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....657 ▫...
Page 653: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 651 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 654: Chrysler Group Llc Customer Center
652 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer service manager first.
Page 655: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 653 In Mexico Contact: Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 656: Warranty Information
654 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust, some of its constituents, and certain manufacturer’s service contract.
Page 657: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 655 MOPAR® PARTS campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety operating at its best.
Page 658: Publication Order Forms
656 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS Diagnostic Procedure Manuals To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Mas- charts and detailed illustrations. These practical manuals tercard, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 659 IF YOU NEED CONSUMER ASSISTANCE 657 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 660 658 IF YOU NEED CONSUMER ASSISTANCE Traction Grades controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the The Traction grades, from highest to lowest, are AA, A, B, material of the tire to degenerate and reduce tire life, and and C.
Page 661 INDEX...
Page 662 660 INDEX Adding Engine Coolant (Antifreeze) ... .612 Air Conditioning System, Zone Control..425 Adding Fuel ......528 Air Pressure, Tires.
Page 663 INDEX 661 Automatic Transmission ....454 Brake Assist System ..... . .478 Adding Fluid .
Page 664 662 INDEX Cargo Area Features ..... . .288 Coat Hook ......280 Cargo Compartment .
Page 665 INDEX 663 Cooling System......610 Delay (Intermittent) Wipers ....224 Adding Coolant (Antifreeze) .
Page 666 664 INDEX E-85 Fuel .......524 Checking Oil Level ..... .599 Economy (Fuel) Mode .
Page 667 INDEX 665 Event Data Recorder ......88 Fuel Requirements ..... .524 Exhaust Gas Caution.
Page 668 666 INDEX Fuel ........519 Fueling ....... .528 Adding .
Page 669 INDEX 667 Glass Cleaning ......625 Heater ....... . .425 Gross Axle Weight Rating .
Page 670 668 INDEX Instrument Panel and Controls ....303 Keys ........12 Instrument Panel Cover .
Page 671 INDEX 669 Brake Assist Warning ....481 Low Fuel ......317 Brake Warning .
Page 672 670 INDEX Loading Vehicle ......280 Mini-Trip Computer ..... . .331 Capacities .
Page 673 INDEX 671 New Vehicle Break-In Period ....114 Viscosity ......600 Oil Filter, Selection .
Page 674 672 INDEX Power Radio Operation ......425 Door Locks ......36 Radio Remote Controls .
Page 675 INDEX 673 Replacement Keys ......16 Seat Belt Maintenance ..... .626 Replacement Parts.
Page 676 674 INDEX Security Alarm ......17 Speed Control (Cruise Control)....231 Selection of Coolant (Antifreeze).
Page 677 INDEX 675 Storing Your Vehicle ..... . .634 Air Pressure ......497 Stow n Go (Fold in Floor) Seats.
Page 678 676 INDEX Spare Tire ......564 Trailer Towing ......533 Spinning .
Page 679 INDEX 677 Transporting Pets ......112 Vanity Mirrors ......133 Tread Wear Indicators .
Page 680 678 INDEX Warning Flasher, Hazard ....549 Windows ....... .38 Warning Lights (Instrument Cluster Description) .
Page 681 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehi- The antenna cable should be as short as practical and routed cle’s electronic system to provide immunity to radio frequency away from the vehicle wiring when possible. Use only fully signals.
Page 682 Chrysler Group LLC 14Y532-126-AC Third Edition Printed in U.S.A.

Dodge Grand Caravan 2014 Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Dodge Grand Caravan 2014

Summary of Contents for Dodge Grand Caravan 2014