Table of Contents
Advertisement
Connect the video game or other external media
devices to the AUX jacks following the color
coding for the VES jacks.
• Pushing the power button will turn the VES
system ON/OFF.
• Pushing the mode button causes the MODE
SELECTION menu to appear on the VES
screen. Use the remote control arrow buttons
to scroll through the available modes, and
then push ENTER to select the desired mode.
Auxiliary Audio/Video Input Jacks
The AUX jacks are located on the driver's side
rear trim panel behind the sliding door.
Connect the video game or other external media
devices to the AUX jacks following the color
coding for the VES jacks.
Using either the touchscreen radio or remote
control, select AUX from the REAR VES CON-
TROL or the MODE SELECTION screen.
Refer to "Video Entertainment System (VES)"
in the vehicle Owner's Manual for further infor-
mation.
UCONNECT PHONE
The Uconnect Phone is a voice-activated,
hands-free, in-vehicle communications system
with Voice Command Capability that allows you
to dial a phone number with your mobile phone
using simple voice commands (see Voice Com-
mand section).
• To determine if your vehicle is equipped with
Uconnect Phone, push the "Uconnect Phone"
button
located on the radio faceplate. If
your vehicle has this feature, you will hear a voice
prompt. If not, you will see a message on the
radio "Uconnect Phone not available."
NOTE:
To access the tutorial, push the "Uconnect
Phone" button
. After the BEEP, say "tu-
torial." Push any button on the faceplate, or
press any button on the touchscreen, to cancel
the tutorial.
• Refer to "Uconnect Phone" in "Multimedia"
in your Owner's Manual for further details.
NOTE:
The Uconnect Phone requires a mobile phone
equipped with the Bluetooth Hands-Free Pro-
file, Version 1.0 or higher. For Uconnect Cus-
tomer
Support:
U.S.
residents
UconnectPhone.com or call 1-877-855-8400.
Canadian residents - visit UconnectPhone.com
or
call,
1-800-465-2001
1-800-387-9983 (French). This site will pro-
vide specific instructions based on the type of
mobile phone being paired.
Phone Pairing
NOTE:
Pairing is a one - time initial setup before using
the phone. Prior to starting the pairing proce-
dure ensure all additional phones within the
vehicle have their Bluetooth disabled.
1. Activate Bluetooth on the mobile phone you
are pairing.
2. Push the "Phone"
button.
3. Wait for the "ready" prompt and BEEP.
-
visit
(English)
or
203
Advertisement
Chapters
Table of Contents
