Omron CJ1W-CORT21 Operation Manual page 58

1 Features and System Configuration
Allocation of User-defined Variables to the Memory Used for CJ-
series Unit
Bits and words are allocated to the memory used for CJ-series when you configure the User Defined
CAN unit with message commands.
• send buffers specification
• send triggers specification
• receive buffers specification
• receive triggers specification
To use this area from the user program, you need to create a user-defined variable of AT specifica-
tion.User-defined variables are created using Sysmac Studio.
Have the necessary user-defined variables created before creating a program.
For details on operations, refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
Precautions for Correct Use Precautions for Correct Use
The user is responsible for management of the memory used for NJ-series Unit. Please take
great care to avoid overlapping of reference areas between user-defined variables.
1-24
CJ-series User Defined CAN Unit Operation Manual for NJ-series CPU Unit (W517)