Table of Contents
Advertisement
2. Basic Installation
2.1 Hard Disk Installation
You can optionally install four 3.5" HDDs inside the DVR for recording videos.
1.
Make sure the DVR is power-off.
2.
Unscrew the ten housing screws of the DVR and remove the housing cover.
3.
Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
4.
Use the SATA Cable, and connect one end to either one of the four SATA ports on the
PCB inside the DVR, and the other end to the SATA port on the HDD.
Silver Screw
HDD Bracket
8
ELUX16x2 FHD Hybrid DVR
Advertisement
Table of Contents
