Table of Contents
Advertisement
3. Installation
3.1 Basic Installation
1
2
4
5
1. Connect the line level audio input devices to the DVR.
2. Connect the cameras to the DVR using the coaxial cables.
3. To manage the DVR over network, use a standard RJ-45 cable to connect the DVR to the
network.
4. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer. Only the 16CH model provides HDMI port.
5. To listen to audio of video source, connect speakers to the Audio Out port. Note that
speakers with amplifier are required.
6. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control keys on the front panel.
7. Using the supplied Power Cord, connect one end to the DC 12V port on the DVR and the
other end to the DC 12V power outlet.
8. Connect a monitor or TV to Video out (BNC port) for adjusting the camera view.
3
4
8
6
7
9
TUTIS Series DVR
Chapter
3
Hide quick links:
Advertisement
Table of Contents
