Speed Change - Makita DUB362 Instruction Manual

Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always
check to see that the switch trigger actuates properly
and returns to the "OFF" position when released.
1.
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
1. Lock button
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
trigger fully, then release it.

Speed change

1
1.
1
1
1
(highest).
NOTICE:
as 6 and back to 1. Do not force it past 6 or 1, or
When working in a high temperature circum-
stance, the tool may be stopped because of the
overheat protection system. In that case let the
tool cool down. Avoid setting to speed 6 (highest)
in high temperature circumstances.
ASSEMBLY
CAUTION:
the battery cartridge is removed before carrying
out any work on the tool.
Installing the long nozzle
2
1. Long nozzle 2.
groove of the long nozzle.
the triangle markings on the long nozzle and the
housing meet each other.
the locking position.
6 ENGLISH
2
1