Fins Write Protection Function - Omron NX701-1720 User Manual

2 Server Function
2-5

FINS Write Protection Function

When data is written into the CPU Unit using the FINS command, this data writing can be disabled so
that the data is not written into the memory of the CPU Unit.
This function is called the FINS write protection function.
The models that support the FINS write protection function are NX701-££20 and NX102-££££.
To set whether to use the write protection function select Configurations and Setup - Controller
Setup - Operation Settings - FINS Settings - Security Settings from the Multiview Explorer of the
Sysmac Studio.
Even when the FINS write protection function is enabled, the data reading from the CPU Unit is still
possible.
For details, refer to Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
2 - 8
NX-series CPU Unit FINS Function User's Manual (W596)