Identification Of Safety Symbols; Operator Safety - McCulloch T22 LS User Manual

Hedge cutter attachment
Hide thumbs Also See for T22 LS:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

IDENTIFICATION OF SAFETY SYMBOLS

use can cause serious injury. You should not touch the blade without
turning off the machine.
after using a while.You should not touch it before cooldown.
Read the operator's manual before use. Failure to follow instructions
could result in serious injury. Save operator's manual.
WARNING:
appliances, basic safety precautions must al-
ways be followed to reduce the risk of fire and
serious injury. Read and follow all instructions.
DANGER:
THIS POWER TOOL CAN
BE DANGEROUS! This unit can cause serious
injury to the operator and others. The warnings
and safety instructions in this manual must be
followed to provide reasonable safety and effi-
ciency in using this unit. The operator is respo-
nsible for following the warnings and instru-
ctions in this manual and on the unit. Never
allow children to use this tool.
SAFETY INFORMATION
ON THE UNIT
DANGER:
RISK OF CUT; KEEP HANDS AWAY
FROM BLADE - This unit can cause serious injury including
amputation.
WARNING:
This unit can be dangerous! Careless or improper
WARNING:
The surface of the whole gear box might be hot
Hazard zone for thrown objects.
• Blade can throw objects violently.
• You and others can be seriously injured.
• Keep children, bystanders, and animals
50 feet (15 meters) away.
Always wear:
- A protective helmet
- Hearing protection
- Approved eye protection
- Approved protective gloves
SAFETY RULES
When using gardening

OPERATOR SAFETY

DANGER:
RISK OF CUT; KEEP
HANDS AWAY FROM BLADE
moves momentarily after the trigger is re-
leased. Do not attempt to clear away cut ma-
terial when the blade is in motion. Make sure
the switch is in the OFF position, the spark
plug wire is disconnected, and the blade has
stopped moving before removing jammed
material from the cutting blade. Do not grab or
hold the unit by the cutting blade.
• Dress properly. Always wear safety glasses
or similar eye protection when operating, or
performing maintenance on your unit (safety
glasses are available).
• Always wear heavy, long pants, long sleeves,
boots, and gloves.
2
- Blade

Advertisement

Table of Contents
loading

This manual is also suitable for:

T22 lcs

Table of Contents