Table of Contents
Advertisement
8.9 Cockpit light
The switch labeling in the center console is fluorescent. This means that the labeling
lights up in darkness when illuminated by the cockpit light. The cockpit light is switched
with the low beam headlamps.
The roof bonding surface must be grease-free. Remove the protective film of
the adhesive strips (Figure 8.9.1) and apply centrally on the inside of the roof
at the position of the center console.
Align the cockpit light so that one LED row points at the steering wheel and
the other row towards the center console.
Route connecting cable at the Y strut of the cage and fix with cable tie (Figure
8.9.2).
The disconnection point to the main wiring harness is located on the right
B-pillar Label: option light
Version: 4/20/2018
ID.
After Sales
Aftersale
8.9.1
8.9.2
911 GT3 Cup (991 II)
MY 2018
8
469
Advertisement
Table of Contents
