www.seagate.com
2.0
Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For
convenience, the phrases the drive and this drive are used throughout this manual to indicate the IronWolf Pro SATA
drive models.
2.1
Specification summary tables
The specifications listed in the following tables are for quick reference. For details on specification measurement or
definition, see the appropriate section of this manual.
Table 2 Drive specifications summary
Drive specification
Formatted (512 bytes/sector)*
Guaranteed sectors
Heads
Discs
Bytes per logical sector
Bytes per physical sector
Recording density, KBPI (Kb/in max)
Track density, KTPI (ktracks/in avg.)
2
Areal density, (Gb/in
avg)
Spindle speed (RPM)
Internal data transfer rate (Mb/s max)
Sustained data transfer rate OD (MiB/s max)
I/O data-transfer rate (MB/s max)
ATA data-transfer modes supported
Cache buffer
Weight: (maximum)
Average latency
Power-on to ready (sec) (typ/max)
Standby to ready (sec) (typ/max)
Startup current (typical) 12V (peak)
Voltage tolerance (including noise)
*
Operating temperature
Non-Operating temperature
Seagate IronWolf Pro SATA Product Manual, Rev. C
ST16000NE000
16TB
(see
Section
2.2)
18
9
512
4096
2336
423
1172
7200
2772
240 (250 MB/s max)
600
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
256MB (262,144KB)
670g (1.477 lb)
4.16ms
25/30
25/30
2.0A
5V ± 5%
12V ± 10%
5° to 60°C (Drive Reported Temperature)
–40° to 70°C (Ambient Temperature, see sections 2.6.1 and 2.15)
Drive specifications
ST14000NE0008
14TB
7