Standard Specifications; Supplied Accessories; Configuration Of Vgs-1; Install The Board To Tk-2180/ 3180 - Kenwood TK-2180 Modification Information

!
Power Consumption
Table 2-28 Power Consumption
Min. Typ.
Supply Voltage 4.5
21
Current (14-pin)
44
2.5
!
Output Characteristic
" Conditions
• The signal source having the output impedance
600ohm provides the sinewave of 30 mVrms 1
kHz from the AI (12-pin) to the AGND (13-pin).
• Power Voltage: 5 V ± 0.1 V
• Terminate the AO terminal (11-pin) and AGND
(10-pin) with a 10kohm resistor.
" Result
• S/N when playing back the voice: Above 40 dB
• Distortion when playing back the voice: Less
than 8%

2.7.5 Standard Specifications

Unit is not provided. (Obtain through the body)

2.7.6 Supplied Accessories

Table 2-29 Supplied Accessories
No. Name Part Number
Instruction
1 B62-1741-x0
Manual
2 Cushion A G13-1974-x4
3 Cushion B G13-1992-x4
4 Cushion C G13-1993-x4
5 Cushion D G13-1994-x4
6 Cushion E G13-1995-x4
7 spacer J30-1292-x4
Version: 1.13 USA
Max. Unit Condition
5 5.5 V
Normal
Operation
mA Flash ROM
Erase
Standby
Remarks
7 languages
Modification Information

2.7.7 Configuration of VGS-1

1. Prepare the VGS-1 board.
2. Attach the cushion (G13-1995-x4) on the shield case
of the VGS-1.
3. Attach the cushion (G13-1992-x4) on the component
side of the VGS-1.
Qty
2.7.8 Install VGS-1 to TK-2180/ 3180
1
1. Remove two screws on the cover.
1
1
1
1
1
1
2 CONNECT OPTIONAL DEVICES
27