Standard Specifications; Supplied Accessories - Kenwood TK-2180 Modification Information

Table 2-22 CN2/4 Pin Specifucation
Name
1 HR2 Horn Alert signal Output 2: 2Amax
2 GND Ground
3 OSP External speaker output (PA); 2Amax
4 ESP External speaker output; 2A max
5 GND Ground
6 HR1 Horn Alert signal Output 1; 2Amax
Figure 2-10 Jumper Pin Specifications (Top View)
Unit
Pin No.
1
Jumper connector
(E40-6375-x5)
2 pin connector
Table 2-23 Jumper Pin Specifications (CN 5)
Pin
HA HR1 Relay
Location
OFF Open
1-2 Pin
ON Grounded
OFF Open
2-3 Pin
ON Short with HR2
Note: 1-pin and 2-pin (HR1) connection and 4-pin and 5-pin
connection are default setting.
" External Speaker
Connect KES-5 to Pin4 and Pin5 of the KAP-2 CN4
(Molex 6 Pin) with the supplied accessary connector and
pins..
" Pablic Address (PA) Function
The PA outpu switch relay is controlled by turning the PA
function on and off. When the PA is activated, the PA
output flows through the following path.
The audio signal input from the microphone passes
through the filter, amplefier and other circuits, then goes
to CN3-pin 5 (SPI) of KAP-2. The audio signal passes
through the relay (K2) and out to CN2-pin2.
When the Jumper is located pin4 and pin5 while PA key is
off, the receive audio come out from the internal soeaker.
Otherwise, located pin5 and 6, the received audio is
outputed from External spealer (KES-5).
" Horn Alert (HA) Function
Version: 1.13 USA
Description
For main set
connector (E-40-6393-x5)
2 3 4 5 6
Pin
PA AF OUTPUT
Location
OFF Internal SP
4-5 Pin
ON Pablic Address
OFF External SP
5-6 Pin
ON Pablic Address
Modification Information
2 CONNECT OPTIONAL DEVICES
The KAP-2 canbe controlled by turning the HA function
on and off and by using a signaling decode output. The
relay has a capability of current 2A maximum to work a
horn relay of vehicle.
There are two Horn Alert settings. (HA1 and HA2)

2.6.5 Standard Specifications

" Display
No remarks.

2.6.6 Supplied Accessories

1
3
Figure 2-11 Supplied Accessories
Table 2-24 Supplied Accessories
No. Name Part Number
Screw
1 (Brazier Head N87-2606-x8
Taptite)
2 Square Plug E59-0419-x5
Insulating
3 F29-0481-x5
Cover
Crimp
4 E23-1257-x5
Terminal
2
4
Qty Remarks
1
1
1
Chain
8
Terminal
23