Advertisement
4 SCREW THE TRIM SURROUND ONTO THE CABINETRY
Using the 4 supplied screws, secure the Trim
Surround to the cabinetry in the correct hole
positions, as shown.
Pre-drill as necessary to avoid splitting the
wood.
IMPORTANT!
Do not screw through either center holes in
the Trim Surround.
Secure the Trim Surround using the
screw hole locations shown
5 SECURE THE TWO SUPPORT BRACKETS IN THE CAVITY
1 Position left and right support
brackets as shown inside, against
the walls of the cavity.
We recommend butting the
brackets up against the rear
frame of the Trim Surround.
2 Secure through front and rear
hole locations on both brackets
using the screws supplied.
Fit the 4 supplied rubber plugs into the Trim
Surround in the correct hole positions, as
shown.
7 INSTALL YOUR COFFEE MAKER
Support
Bracket
1 Install your Coffee Maker as per it's installation
instructions. Ensure the slides are secured correctly
2 Position your Coffee Maker in the cavity. Ensure the
Coffee Maker and Trim Kit are correctly aligned and
the Coffee Maker can open and close freely, before
securing.
6 FIT THE FOUR RUBBER HOLE PLUGS
x4
(REFER TO SEPARATE INSTRUCTIONS SUPPLIED WITH COFFEE MAKER)
591534A
12.17
Advertisement
