Table of Contents
Advertisement
3. Click on OK button to save settings and exit.
Warning
Alternatively you may click Default to restore the default settings. You may press
any scanner button to wake up the scanner from power saving.
C
ALIBRATING THE
Calibrate the scanner if colors appear in areas that should be white, or colors of the
scanned image and the original vary a lot. This allows you to adjust and compensate
for variations that can occur in the optical component over time by its nature.
1. From the Windows START menu, point to All Programs > Your Scanner
Model Name, and then click Scanner Utility. (For Windows 8.1 users: Point
your mouse cursor to the upper or lower right corner of your screen to open the
Charm bar. Click on the Start charm, then click on the downwards arrow button
in the lower left corner of the screen. The Apps screen will be shown. Move
your cursor to the right edge of the screen to scroll right until you find Your
scanner model name, and then click on Scanner Utility.)
2. The Scanner Utility window opens. Find the Calibration Settings section and
select Flatbed Reflective as the scan source. Click the button of your option:
a. Set the scanner to perform calibration before a scan only if the scan setting
"Scan Mode" or "Resolution" is modified: Click the button before Perform
calibration before scanning if the scan mode or resolution is changed.
b. Set the scanner to perform calibration before a scan: Click the button
before Always perform calibration before scanning.
c. Set the scanner to automatically perform calibration: Click the button before
To completely shut down the scanner, press the
power switch on the side of the scanner.
If the scanner will not be used for a long period
of time, shut down the scanner and then
disconnect the power cable from the power
outlet.
S
CANNER
20
Hide quick links:
Advertisement
Table of Contents
