Table of Contents
Advertisement
3. The Scanner Utility window opens. Find the Initial Scanning Position
Alignment section and select Flatbed Reflective as the source.
Alignment
Source
Alignment
Window
4. Click the Scan button. Part of the document image will be displayed in the
Alignment Window.
5. Click the Alignment Position buttons (Up, Down, Left, Right) until the top left
corner of the scanned document aligns with the top left corner of the Alignment
Window.
6. When the alignment completes, click on OK button to save settings and exit.
S
M
TANDBY
ODE
To save power consumption, the scanner will enter the standby mode after it is idle
for a while. You may disable the standby mode or define an idle time for the scanner to
automatically enter the standby mode.
1. From the Windows START menu, point to All Programs > Your Scanner
Model Name, and then click Scanner Utility. (For Windows 8.1 users: Point
your mouse cursor to the upper or lower right corner of your screen to open the
Charm bar. Click on the Start charm, then click on the downwards arrow button
in the lower left corner of the screen. The Apps screen will be shown. Move
your cursor to the right edge of the screen to scroll right until you find Your
scanner model name, and then click on Scanner Utility.)
2. In the Standby Mode section of the Scanner Utility window that opens, click the
button of your option:
a. To disable the Standby Mode: Click the button before Disable Standby
Mode.
b. To automatically enter the Standby Mode (Sleep): Click the button before
Sleep and then click the up or down arrows to set a default time for the
scanner to automatically enter the Standby Mode.
Information
The scanner will enter the standby mode after it is
idle for 10 minutes. Simply press any scanner
button on the scanner panel and the scanner will
return back to the normal status.
19
Alignment
Position
Hide quick links:
Advertisement
Table of Contents
