Changing The Sound Settings - Mercedes-Benz COMAND Supplement Manual

To select Start Android Auto Automati‐ Start Android Auto Automati‐
X
cally cally: turn and press the controller.
Allow automatic connection O.
X
Android Auto starts automatically as soon as
the mobile phone is connected to the USB
port ç of the multimedia system.

Changing the sound settings

When Android Auto is active, you can change the
sound settings in the radio menu.
To call up the radio menu: press the $
X
button.
To show the main function bar: slide 5 the
X
controller.
To select Radio: turn and press the controller. Radio
X
To switch to the menu bar: slide 6 the con-
X
troller.
To select à: turn and press the controller.
X
Change the sound settings.
Activating voice control
When Android Auto is active, you can start the
mobile phone's voice control.
Press and hold the ? button on the multi-
X
function steering wheel.
Depending on the mobile phone a tone
sounds.
Ending Android Auto
Mercedes-Benz recommends that you only can-
cel Android Auto when your vehicle is stationary.
Terminate the USB connection between the
X
mobile phone and the multimedia system.
The No No Android Android Auto Auto Device
Please ensure that your device is Please ensure that your device is
connected to the correct USB port. connected to the correct USB port.
message appears in the multifunction display.
Transmitted vehicle data
When using Android Auto, specific vehicle data
is transmitted to the mobile phone. This makes
it possible to use selected mobile phone serv-
ices efficiently. The mobile phone does not have
active access to vehicle data.
The following system information is transmitted:
R
R
These data are transmitted in order to optimize
communication between the vehicle and mobile
phone.
A random vehicle code is generated for this pur-
pose and in order to assign multiple vehicles to
the mobile phone.
This code is not related to the vehicle identifi-
cation number (VIN) and is deleted if the multi-
media system is reset (
The following driving status data is transmitted:
R
R
R
These data are transmitted in order to adapt the
content displayed to the driving situation.
The following position data is transmitted:
R
R
R
R
These data are transmitted only when naviga-
tion is active in order to improve navigation (e.g.
when driving through a tunnel).
Device Connected Connected
Android Auto
Multimedia system software version
System ID (anonymous)
page 42).
Y
Gear position engaged
Difference between parked, stationary,
coasting and driving
Instrument cluster day/night mode
Coordinates
Speed
Compass direction
Acceleration direction
121
Z