Displaying Details - Mercedes-Benz COMAND Supplement Manual

®
Bluetooth audio mode
150
If the multimedia system cannot find your Blue-
®
tooth audio device, external authorization may
follow ( page 150).
Y
Authorizing a Bluetooth
Select a Bluetooth
X
yet been authorized from the list: turn and
press the controller.
Authorization starts.
Depending on which Bluetooth
is being used, the device can be authorized
either by entering a passkey or by Secure
Simple Pairing. You can find information on
this in the "Authorizing (connecting) a mobile
phone" section (
Y
After successful authorization, the Blue-
tooth ® audio device is connected and starts
playing.
i
With some Bluetooth
back must initially be started on the device
itself, so that the multimedia system can play
the audio data. For the audio device used, the
output of the audio files has to be specified via
®
Bluetooth .
i
®
The Bluetooth
®
Bluetooth version 2.1 for connection via
Secure Simple Pairing. The multimedia sys-
tem creates a six-digit code which is dis-
played simultaneously on both devices that
are to be connected.
For some Bluetooth
ing must also be confirmed within 10 sec-
onds.
External authorization
If the multimedia system does not find your
®
Bluetooth audio device, this may be due to
particular security settings on your Bluetooth
audio device. In this case, check whether your
®
Bluetooth audio device can locate the multi-
media system.
®
The Bluetooth device name of the multimedia
system is MB MB Bluetooth Bluetooth.
Switch on Bluetooth
X
( page 149).
Y
Slide 6 the controller.
X
The media menu bar appears.
To select Options Options: turn and press the con-
X
troller.
®
audio device
®
audio device that has not
®
audio device
page 92).
®
audio devices, play-
audio device must support
®
audio devices, the pair-
®
®
audio mode
To select Bluetooth Audio Bluetooth Audio Devices
X
the controller.
A new menu appears.
To select Connect Connect via via Audio
X
and press the controller.
A message appears.
Start the authorization on your Bluetooth
X
audio device (see the manufacturer's operat-
ing instructions).
After successful authorization, the Blue-
®
tooth audio device is connected and starts
playing.
®
With some Bluetooth audio devices, playback
must initially be started on the device itself, so
that the multimedia system can play the audio
data.

Displaying details

To select a Bluetooth ® audio device from the
X
Bluetooth ® device list: turn the controller
( page 149).
Y
To select G: slide 9 the controller.
X
To select Details Details: turn and press the con-
X
troller.
The following information concerning the
selected mobile phone is shown:
Bluetooth ® name
R
®
Bluetooth address
R
Availability status (shown after an update)
R
Authorization status
R
Closing the detailed display
Wait for a few seconds.
X
or
Press the % button.
X
Starting/stopping playback
To select start play back Ì: turn and
X
press the controller.
Playback starts. Ë is selected.
To stop playback: select Ë.
X
A message appears. Ì is selected.
To continue playback: select Ì.
X
A message appears. Ë is selected.
Devices: press
Audio Device Device: turn
®