Mercedes-Benz COMAND Supplement Manual page 32

Character entry (navigation)
30
The G symbol indicates that an entry exists
more than once.
To delete a character: slide 6 and turn the
X
controller, then press it after selecting F.
To delete an entire entry: slide 6 and turn
X
the controller; then after selecting F press
and hold down the controller until the entire
entry is deleted.
To confirm an entry: slide 6 and turn the
X
controller, then press it after selecting¬.
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
The location selection list appears. The selec-
ted entry is highlighted.
The example shows the character entry when
you save a destination as a navigable contact in
the address book (
Y
located in the input line.
To select an input line: slide 6 and turn
X
the controller, then press it after selecting 4
or 5.
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
To move the cursor: select the input line.
X
Turn and press the controller.
X
or
Slide 6 and turn the controller, then press it
X
after selecting 2 or 3.
page 57). The cursor is
To change the character bar language:
X
slide 6 and turn the controller, then press it
after selecting B.
A menu appears.
Turn and press the controller.
X
The character set for the selected language is
set.
The character bar entry functions are listed in
the table.
Symbol Function
Ä Switches between digits and sym-
bols
* Switches the character bar from
uppercase to lowercase letters
B Changes the character bar lan-
guage
F Deletes a character or an entry
è Switches to keyword search
( page 58)
Y
4, 5 Selects the input line
2, 3 Moves the cursor within the input
line
¬ Confirms an entry
& Cancels input
Entering characters using the number
keypad
Press one of the number keypad buttons, e.g.
X
l, once or repeatedly in quick succession.
The character appears at the bottom of the
display when the key is pressed. The first
available letter is highlighted.