Mercedes-Benz COMAND Supplement Manual page 87

To select an area: when the map with cross-
X
hair appears, press the controller.
A red square appears on the map, symbolizing
the area to be blocked.
To change the size of the area: turn the
X
controller.
The map scale is shown at the bottom of the
display. The needle points to the map scale
currently selected.
When the desired size is set, press the con-
X
troller.
The area is entered into the list.
Turning an area on/off and displaying/
changing the area
To switch to navigation mode: press the
X
ß button.
To show the menu: slide 6 the controller.
X
To select Options Options: turn and press the con-
X
troller.
Select Route Route Settings Settings.
X
Select Avoid Options Avoid Options.
X
Select Avoid Avoid Area Area.
X
A list appears.
To switch an area to avoid on/off: select an
X
area to mark by turning and pressing the con-
troller.
The area will be avoided O or not ª.
Map functions
To display/change an area: mark an area by
X
turning the controller.
Slide 9 the controller.
X
To select Display/Change Display/Change: press the con-
X
troller.
The map with the crosshair appears.
The area currently blocked is displayed as a
red square.
To move the area to a new location: slide
X
1, 4, 2 the controller.
To change the size of the area, press the con-
X
troller.
Turn the controller.
X
To apply the changes, press the controller.
X
A message appears stating that the area has
been set.
Deleting one/all areas
To switch to navigation mode: press the
X
ß button.
To show the menu: slide 6 the controller.
X
To select Options: turn and press the con- Options
X
troller.
Select Route Settings Route Settings.
X
Select Avoid Options Avoid Options.
X
Select Avoid Area Avoid Area.
X
A list appears.
To delete an area: mark an area by turning
X
the controller.
Slide 9 the controller.
X
Select Delete Delete or Delete All Delete
X
A prompt appears asking whether you wish to
delete the area.
Select Yes Yes or No. No
X
After selecting Yes Yes, the area is deleted.
To delete all areas: when the list appears,
X
slide 9 the controller.
Select Delete Delete All All.
X
A prompt appears asking whether you wish to
delete all areas.
Select Yes Yes or No No.
X
After selecting Yes, all areas are deleted. Yes
85
All.
Z