Table of Contents
Advertisement
Filter in water supply blocked
Preparation:
Turn off the tap.
1.
Set any programme (except Rinse/
2.
Spin).
Press A.
3.
Allow the programme to run for
approximately 40 seconds.
Press # to switch off the appliance.
4.
Disconnect the appliance's mains
5.
plug from the power supply.
Cleaning and maintenance
Clean the filter on the tap as follows:
Disconnect the hose from the water
1.
tap.
Clean the filter with a small brush.
2.
Connect the hose and check for
3.
leaks.
en
29
Advertisement
Table of Contents
