Table of Contents
Advertisement
Y
Display
D i s p l a y
Number/code Description
e.g. 50
Wash/spin cycle
duration
e.g. 2
Rinse cycles
e.g. 04
Program start
delay
E1
Water supply
E2
Water outlet
E3
Open lid
E4
Unbalanced load
Information
Expected wash/spin cycle duration (N wash/Wash and 0 Spin) in
minutes.
Number of rinse cycles (O Rinse) in the set program.
Delay to the program start in hours if you have activated the Delay
start/Delay Start program setting.
The machine is not filling with water properly (unable to reach default
water level). Make sure that:
The tap is fully open.
■
The supply hose is not kinked or trapped.
■
The filter in the water supply is not blocked. ~ Page 29
■
The drain pump or drain hose/drain pipe is blocked:
Clean the drain pump ~ Page 25
■
Clean the drain hose/drain pipe
■
The lid must be fully closed when a program is in progress.
Close the lid and press the Start button
■
Remove any trapped laundry
■
The laundry is not evenly distributed in the drum, creating an
■
imbalance.
Note:
The appliance has an unbalanced load detection system,
which interrupts the spin cycle when the laundry is unevenly dis-
tributed.
Redistribute the laundry by hand to eliminate the imbalance.
Adjust the height of the appliance feet to level the appliance.
■
~ Page 9
Display
en
13
Advertisement
Table of Contents
