Controller Id; Diagnostics; Factory Initialization - Russound ST2S Installation Manual

ST2S TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Press Select
button to select
Sirius Tuner
Mode
Band
TUNER
SETUP
Menu
Mode
Band
MEM
NAME
Procedure
Controller ID (SIRIUS)
The Controller ID procedure is used to identify
the controller(s) that the SIRIUS tuner will
respond to.
Note: For the SIRIUS module that is installed in
the ST2S chassis, "All Controllers" will be the
default setting.
Diagnostics (SIRIUS)
The Diagnostics procedure is for factory use only.
32
Sirius Setup Menu
Bank Name Procedure
SOURCE
UPDATE
NUM
FIRMW
Procedure
Procedure
BANK
CONTROLLR
NAME
ID
Procedure
Procedure
Mode
Band
BANK
Mode
BANK # Mode
NAME Band
Band
Mode
Band
Selects
character
Selects
character
position
Repeat
for each
character
in name
FACTORY SYSTEM
INIT INFO
Procedure Procedure

DIAGNOSTICS

FACTORY
Procedure INIT
Procedure
SAVE
Mode
Band
CHANGES?
Factory Initialization (SIRIUS)
The Factory Initialization procedure allows the
erasure of all programmed settings of the SIRIUS
tuner and returns them to the factory default set-
tings.
1. Enter the Setup Menu by pressing and holding
the SELECT button.
2. TUNER SETUP appears. Press MODE/BAND.
3. MEMORY NAME appears. Press MEM
Up/Down until FACTORY INIT appears on the tuner.
Chassis
Setup
Menu
Sirius
SYSTEM
INFO
Setup
Procedure
Menu